MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Peppermint Essence (Spirit) PE110X
PRODUCT USE
Carmitive
MANUFACTURERS NAME: SUPPLIERS NAME:
Xenex Labs XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
SPE100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS
% CAS NUMBER LD50 / LC50 OF INGREDIENT
/ CHEMICAL FORMULA
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
Peppermint Essence (Spirit) - 8030-00-0
鈥? Peppermint oil 10 8006-90-4 Not Available Not Available
鈥? Ethyl alcohol 200 proof 90 64-17-5 RAT ORAL 7060mg/kg
RAT VAPOR 8000ppm 4hours
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE AND APPEARANCE ODOR TASTE ODOR THRESHOLD (ppm)
Liquid Peppermint Not Available Not Available
MELTING POINT (C) BOILING POINT (C)
-114.1掳C (-173.4掳F) [Ethyl alcohol 200 proof] 78.5掳C (173.3掳F) [Ethyl alcohol 200 Proof]
pH SPECIFIC GRAVITY VOLATILITY COEFF. WATER/OIL DIST.
Neutral Weighted average: 0.8 Not Available Not Available
VAPOR PRESSURE VAPOR DENSITY
43 mm of Hg (@ 20掳C) (Ethyl alcohol 200 Proof) 1.59 (Air = 1) (Ethyl alcohol 200 Proof)
DISPERSION PROPERTIES / SOLUBILITY
Easily soluble in cold water, hot water, methanol, diethyl ether
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
Flammable - Flammable in presence of open flames and sparks, of heat.
Slightly flammable to flammable in presence of oxidizing materials.
Containers should be grounded. CAUTION: MAY BURN WITH NEAR INVISIBLE FLAME Vapor may travel
considerable distance to source of ignition and flash back. (Ethyl alcohol 200 Proof)
MEANS OF EXTINCTION
Flammable liquid, soluble or dispersed in water.
SMALL: Use DRY chemical powder.
LARGE: Use alcohol foam, water spray or fog
AUTOIGNITION TEMPERATURE (C) CRITICAL TEMPERATURE
422掳C (791.6掳F) (Ethyl alcohol 200 Proof). Not Available
FLASHPOINT (C) AND METHOD
CLOSED CUP: 12.78掳C (55掳F). OPEN CUP: 12.78掳C (55掳F). (Cleveland). (Ethyl alcohol 200 Proof)
FLAMMABLE LIMITS (% BY VOLUME) HAZARDOUS COMBUSTION PRODUCTS
LOWER: 3.3% (CO,CO2) Oxides of carbon. Acrid smoke and fume
UPPER: 19%
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable - Avoid incompatible materials
NO YES
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
Reactive with oxidizing agents
REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available
HAZARDOUS DECOMPOSITION PRODUCTS
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
The products of degradation are more toxic.
MATERIAL SAFETY DATA SHEET
PE110X
PRODUCT IDENTIFIER
Peppermint Essence (Spirit)
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Very hazardous in case of skin contact (irritant). Hazardous in case of eye contact (irritant). Slightly hazardous in case of
ingestion, of inhalation.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
DEVELOPMENTAL TOXICITY: PROVEN [Ethyl alcohol 200 Proof]
The substance is toxic to the reproductive system.
Repeated or prolonged exposure to the substance can produce target organs damage.
Moderately toxic and narcotic in high concentrations. Experimentally tumorigen. (Ethyl alcohol 200 Proof)
EXPOSURE LIMITS
Ethyl alcohol 200 Proof
TWA: 1000 (ppm) from OSHA (PEL) TWA: 1900 (mg/m3) from OSHA
Consult local authorities for acceptable exposure limits.
SYNERGISTIC PRODUCTS
IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT
Yes Not Available Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY
TERATOGENICITY CARCINOGENICITY
Not Available Not Available Not Available Not Available
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) Approved / Certified respirator Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their
respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station
location.
LEAK AND SPILL PROCEDURE
Dilute with water and mop up or absorb with an inert material and put the spilled material in an appropriate waste
disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary
system.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue
under a fume hood. Ground all equipment containing material. Do not breathe gas/fumes/ vapor/spray. Wear suitable
protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek
medical attention and show the label when possible. Avoid contact with skin and eyes. Keep away from incompatibles
such as oxidizing agents
STORAGE REQUIREMENTS
Flammable materials should be stored in a separate safety storage cabinet or room. Keep away from heat. Keep away
from sources of ignition. Keep container tightly closed. Keep in a cool, well-ventilated place. Ground all equipment
containing material. A refrigerated room would be preferable for materials with a flash point lower than 37.8掳C (100掳F).
SPECIAL SHIPPING INFORMATION
DOT Class 3: Flammable liquid. DOT Classification
Ethanol solution (Ethyl alcohol 200 Proof) : UN1170 PG: III
WHMIS (Canada) CLASS B-2: Flammable liquid with a flash point lower than 37.8掳C(100掳F).
CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
MATERIAL SAFETY DATA SHEET
PE110X
PRODUCT IDENTIFIER
Peppermint Essence (Spirit)
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the
SKIN
contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds,
crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If
irritation persists, seek medical attention. Wash contaminated clothing before reusing.
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15
EYES
minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical
attention.
Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
INHALATION
Do not induce vomiting. Examine the lips and mouth to ascertain whether the tissues are damaged,
INGESTION
a possible indication that the toxic material was ingested; the absence of such signs, however, is
not conclusive. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not
breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
SECTION 9 - PREPARATION DATE OF M.S.D.S.
All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packa
If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the us
responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical
data judged to be reliable, Xenex Laboratories Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 May 27 2008
|