Search   
MSDS 
:
 4-Dimethylaminobenzaldehyde, reagent acs
CAS 
:
 100-10-7
SYNONYMS 
:
 4-Dimethylaminobenzaldehyde; 4-Dimethylaminobenzenecarbonal;     p-Foryldimethylaniline; Ehrlich's Reagent
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 100-10-7 |4-Dimethylaminobenzaldehyde | 98.0 | 202-819-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Light sensitive.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up,
then place into a suitable container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Store protected from light.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Appearance: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 176-177 C
Freezing/Melting Point: 73 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Alcohol, Ether
Specific Gravity/Density: Not available.
Molecular Formula: C2H6N1C6H4CHO
Molecular Weight: 149.0831

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May discolor on
exposure to light.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 100-10-7: CU5775000
LD50/LC50:
CAS# 100-10-7: Oral, mouse: LD50 = 800 mg/kg.
Carcinogenicity:
4-Dimethylaminobenzaldehyde -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 100-10-7: 2
United Kingdom Occupational Exposure Limits

Canada
CAS# 100-10-7 is listed on Canada's DSL List.
CAS# 100-10-7 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 100-10-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/18/1998 Revision #1 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
bis(2-Ethylhexyl) hydrogen phosphate, 95% (titr.) 298-07-7
Acriflavine Neutral, 13.3-15.8% Chlorine (on Dried Substance) 7782-50-5
p-Phenetidine, 98% 156-43-4
Cryptocyanine, 99% (UV-VIS) 4727-50-8
Methyl anthranilate 134-20-3
Phenylmercuric Nitrate, 62.75-63.50% Mercury 8003-05-2
Formaldehyde, 37 wt% solution in water, stabilized with 10-15% 50-00-0
2,4-Dimethyl-3-pentanol, 99+% 600-36-2
4-Bromochlorobenzene, 99% 106-39-8
Beta-Alanine, 98% 107-95-9
Tin (IV) Oxide, 99.995% 18282-10-5
Ethanesulfonic Acid, 99% 594-45-6
5-Methyl-3-heptanone, 98.5+% 541-85-5
m-Phenetidine, 98% 621-33-0
4-Dimethylaminobenzaldehyde, 98% 100-10-7
4-Dimethylaminobenzaldehyde, reagent acs 100-10-7
1,1,2,2-Tetrachloroethane, 97% 79-34-5
p-Phenylenediamine, 99+% 106-50-3
Hemin, bovine, crystalline, 98% 16009-13-5
2,6-Dimethylphenol, P.A. 576-26-1
beta-Methylstyrene, 99% trans, stabilized with 0.01% BHT 128-37-0
Diethyl Sulfate, 99% 64-67-5
3,5-Diiodosalicylic Acid, 97% (HPLC) 133-91-5
2-Sulfobenzoic Acid Cyclic Anhydride, Tech 81-08-3
1,5-Pentanediol, 98% 111-29-5
Dibenzyl Phosphate, 99% 1623-08-1
2-Methyl-1-undecene, 99+% 18516-37-5
2-Nitrobenzoic acid, 85-90%,(gc) 552-16-9
Lithium acetylide, ethylenediamine complex 85-92% 6867-30-7
3,3',4,4'-Benzophenonetetracarboxylic dianhydride, 96% 2421-28-5
trans-Cinnamaldehyde, 99% 104-55-2
Fullerene C70, 99+% (HPLC) 115383-22-7
3-Bromo-1-propanol, 98% 627-18-9
3-Nitrobenzyl chloride, 97+% (gc) 619-23-8
2,6-Diethylaniline, 98% 579-66-8
1,1,1-Trichloroethane, 93.5%, stabilized with ca. 5% 1,4-dioxane 71-55-6
Trimethyl Phosphate, 97% 512-56-1
2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino)- Phenol, 97% 14337-53-2
Beta-Cyclodextrin Hydrate, 99% (HPLC) 68168-23-0
3,3'-Diethylthiadicarbocyanine Iodide, 99% (UV-VIS) 514-73-8
4-Methyl-1-cyclohexene, 99% 591-47-9
Mesityl oxide, 99%, mixt.of alpha- and bet a isomers(ca.93% alpha) 141-79-7
Butyl acrylate, 99+%, stabilized with 20 ppm MEHQ 141-32-2
Methyl diphenylphosphine, 99% 1486-28-8
2,5-Di-tert-butylhydroquinone 88-58-4
Orcinol, Monohydrate (Pract), 95% (UV-Vis) 6153-39-5
1-Iodohexane, 98+%,stabilized over copper 638-45-9
Octadecane, 99+% (gc) 593-45-3
Pamoic Acid, Disodium Salt Monohydrate, 98% (UV-Vis) 6640-22-8
Potassium fluoride 7789-23-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net