**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 298-07-7 |Bis(2-ethylhexyl) hydrogen phosphate | 95 | 206-056-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 21 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful in contact with skin. Causes burns.Corrosive.The
toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May be harmful if absorbed through the skin. May
cause skin rash (in milder cases), and cold and clammy skin with
cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do not use mouth-to-mouth
resuscitation if victim ingested or inhaled the substance; induce
artificial respiration with the aid of a pocket mask equipped with a
one-way valve or other proper respiratory medical device.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Containers may explode
when heated.
Extinguishing Media:
Do NOT get water inside containers. For large fires, use dry
chemical, carbon dioxide, alcohol-resistant foam, or water spray. For
small fires, use carbon dioxide, dry chemical, dry sand, or
alcohol-resistant foam. Cool containers with flooding quantities of
water until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Avoid ingestion and inhalation. Do not ingest or inhale.
Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 298-07-7:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: amber
Odor: None reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 48 deg C @ 12.00mmHg
Freezing/Melting Point: -60 deg C
Autoignition Temperature: Not applicable.
Flash Point: 385 deg F ( 196.11 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: slightly soluble
Specific Gravity/Density: .9700g/cm3
Molecular Formula: C16H35O4P
Molecular Weight: 322.42
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, metals.
Hazardous Decomposition Products:
Phosphorous fumes.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 298-07-7: TB7875000
LD50/LC50:
CAS# 298-07-7: Draize test, rabbit, eye: 5 mg Moderate; Draize test,
rabbit, eye: 250 ug/24H Severe; Draize test, rabbit, skin: 5 mg/24H
Severe; Oral, rat: LD50 = 4940 uL/kg; Skin, rabbit: LD50 = 1250
uL/kg.
Carcinogenicity:
Bis(2-ethylhexyl) hydrogen phosphate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: DIISOOCTYL ACID PHOSPHATE
Hazard Class: 8
UN Number: 1902
Packing Group: III
IMO
Shipping Name: DIISOOCTYL ACID PHOSPHATE
Hazard Class: 8
UN Number: 1902
Packing Group: III
RID/ADR
Shipping Name: DIISOOCTYL ACID PHOSPHATE
Hazard Class: 8
UN Number: 1902
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 21 Harmful in contact with skin.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 298-07-7: 1
Canada
CAS# 298-07-7 is listed on Canada's DSL List.
CAS# 298-07-7 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 298-07-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/11/1997 Revision #4 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
bis(2-Ethylhexyl) hydrogen phosphate, 95% (titr.)
| 298-07-7 |
|
Acriflavine Neutral, 13.3-15.8% Chlorine (on Dried Substance)
| 7782-50-5 |
|
p-Phenetidine, 98%
| 156-43-4 |
|
Cryptocyanine, 99% (UV-VIS)
| 4727-50-8 |
|
Methyl anthranilate
| 134-20-3 |
|
Phenylmercuric Nitrate, 62.75-63.50% Mercury
| 8003-05-2 |
|
Formaldehyde, 37 wt% solution in water, stabilized with 10-15%
| 50-00-0 |
|
2,4-Dimethyl-3-pentanol, 99+%
| 600-36-2 |
|
4-Bromochlorobenzene, 99%
| 106-39-8 |
|
Beta-Alanine, 98%
| 107-95-9 |
|
Tin (IV) Oxide, 99.995%
| 18282-10-5 |
|
Ethanesulfonic Acid, 99%
| 594-45-6 |
|
5-Methyl-3-heptanone, 98.5+%
| 541-85-5 |
|
m-Phenetidine, 98%
| 621-33-0 |
|
4-Dimethylaminobenzaldehyde, 98%
| 100-10-7 |
|
4-Dimethylaminobenzaldehyde, reagent acs
| 100-10-7 |
|
1,1,2,2-Tetrachloroethane, 97%
| 79-34-5 |
|
p-Phenylenediamine, 99+%
| 106-50-3 |
|
Hemin, bovine, crystalline, 98%
| 16009-13-5 |
|
2,6-Dimethylphenol, P.A.
| 576-26-1 |
|
beta-Methylstyrene, 99% trans, stabilized with 0.01% BHT
| 128-37-0 |
|
Diethyl Sulfate, 99%
| 64-67-5 |
|
3,5-Diiodosalicylic Acid, 97% (HPLC)
| 133-91-5 |
|
2-Sulfobenzoic Acid Cyclic Anhydride, Tech
| 81-08-3 |
|
1,5-Pentanediol, 98%
| 111-29-5 |
|
Dibenzyl Phosphate, 99%
| 1623-08-1 |
|
2-Methyl-1-undecene, 99+%
| 18516-37-5 |
|
2-Nitrobenzoic acid, 85-90%,(gc)
| 552-16-9 |
|
Lithium acetylide, ethylenediamine complex 85-92%
| 6867-30-7 |
|
3,3',4,4'-Benzophenonetetracarboxylic dianhydride, 96%
| 2421-28-5 |
|
trans-Cinnamaldehyde, 99%
| 104-55-2 |
|
Fullerene C70, 99+% (HPLC)
| 115383-22-7 |
|
3-Bromo-1-propanol, 98%
| 627-18-9 |
|
3-Nitrobenzyl chloride, 97+% (gc)
| 619-23-8 |
|
2,6-Diethylaniline, 98%
| 579-66-8 |
|
1,1,1-Trichloroethane, 93.5%, stabilized with ca. 5% 1,4-dioxane
| 71-55-6 |
|
Trimethyl Phosphate, 97%
| 512-56-1 |
|
2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino)- Phenol, 97%
| 14337-53-2 |
|
Beta-Cyclodextrin Hydrate, 99% (HPLC)
| 68168-23-0 |
|
3,3'-Diethylthiadicarbocyanine Iodide, 99% (UV-VIS)
| 514-73-8 |
|
4-Methyl-1-cyclohexene, 99%
| 591-47-9 |
|
Mesityl oxide, 99%, mixt.of alpha- and bet a isomers(ca.93% alpha)
| 141-79-7 |
|
Butyl acrylate, 99+%, stabilized with 20 ppm MEHQ
| 141-32-2 |
|
Methyl diphenylphosphine, 99%
| 1486-28-8 |
|
2,5-Di-tert-butylhydroquinone
| 88-58-4 |
|
Orcinol, Monohydrate (Pract), 95% (UV-Vis)
| 6153-39-5 |
|
1-Iodohexane, 98+%,stabilized over copper
| 638-45-9 |
|
Octadecane, 99+% (gc)
| 593-45-3 |
|
Pamoic Acid, Disodium Salt Monohydrate, 98% (UV-Vis)
| 6640-22-8 |
|
Potassium fluoride
| 7789-23-3 |
|
|