Search   
MSDS 
:
 2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino)- Phenol, 97%
CAS 
:
 14337-53-2
SYNONYMS 
:
 Bromo-PADAP.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14337-53-2 |2-(5-Bromo-2-Pyridylazo)-5-(Diethylami| 97% | 238-286-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Runoff from fire control
or dilution water may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 14337-53-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: red
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 157.00 - 158.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C15H17BrN4O
Molecular Weight: 349.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, irritating and toxic fumes and gases, hydrogen
bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14337-53-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino)-Phenol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 14337-53-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 14337-53-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14337-53-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
bis(2-Ethylhexyl) hydrogen phosphate, 95% (titr.) 298-07-7
Acriflavine Neutral, 13.3-15.8% Chlorine (on Dried Substance) 7782-50-5
p-Phenetidine, 98% 156-43-4
Cryptocyanine, 99% (UV-VIS) 4727-50-8
Methyl anthranilate 134-20-3
Phenylmercuric Nitrate, 62.75-63.50% Mercury 8003-05-2
Formaldehyde, 37 wt% solution in water, stabilized with 10-15% 50-00-0
2,4-Dimethyl-3-pentanol, 99+% 600-36-2
4-Bromochlorobenzene, 99% 106-39-8
Beta-Alanine, 98% 107-95-9
Tin (IV) Oxide, 99.995% 18282-10-5
Ethanesulfonic Acid, 99% 594-45-6
5-Methyl-3-heptanone, 98.5+% 541-85-5
m-Phenetidine, 98% 621-33-0
4-Dimethylaminobenzaldehyde, 98% 100-10-7
4-Dimethylaminobenzaldehyde, reagent acs 100-10-7
1,1,2,2-Tetrachloroethane, 97% 79-34-5
p-Phenylenediamine, 99+% 106-50-3
Hemin, bovine, crystalline, 98% 16009-13-5
2,6-Dimethylphenol, P.A. 576-26-1
beta-Methylstyrene, 99% trans, stabilized with 0.01% BHT 128-37-0
Diethyl Sulfate, 99% 64-67-5
3,5-Diiodosalicylic Acid, 97% (HPLC) 133-91-5
2-Sulfobenzoic Acid Cyclic Anhydride, Tech 81-08-3
1,5-Pentanediol, 98% 111-29-5
Dibenzyl Phosphate, 99% 1623-08-1
2-Methyl-1-undecene, 99+% 18516-37-5
2-Nitrobenzoic acid, 85-90%,(gc) 552-16-9
Lithium acetylide, ethylenediamine complex 85-92% 6867-30-7
3,3',4,4'-Benzophenonetetracarboxylic dianhydride, 96% 2421-28-5
trans-Cinnamaldehyde, 99% 104-55-2
Fullerene C70, 99+% (HPLC) 115383-22-7
3-Bromo-1-propanol, 98% 627-18-9
3-Nitrobenzyl chloride, 97+% (gc) 619-23-8
2,6-Diethylaniline, 98% 579-66-8
1,1,1-Trichloroethane, 93.5%, stabilized with ca. 5% 1,4-dioxane 71-55-6
Trimethyl Phosphate, 97% 512-56-1
2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino)- Phenol, 97% 14337-53-2
Beta-Cyclodextrin Hydrate, 99% (HPLC) 68168-23-0
3,3'-Diethylthiadicarbocyanine Iodide, 99% (UV-VIS) 514-73-8
4-Methyl-1-cyclohexene, 99% 591-47-9
Mesityl oxide, 99%, mixt.of alpha- and bet a isomers(ca.93% alpha) 141-79-7
Butyl acrylate, 99+%, stabilized with 20 ppm MEHQ 141-32-2
Methyl diphenylphosphine, 99% 1486-28-8
2,5-Di-tert-butylhydroquinone 88-58-4
Orcinol, Monohydrate (Pract), 95% (UV-Vis) 6153-39-5
1-Iodohexane, 98+%,stabilized over copper 638-45-9
Octadecane, 99+% (gc) 593-45-3
Pamoic Acid, Disodium Salt Monohydrate, 98% (UV-Vis) 6640-22-8
Potassium fluoride 7789-23-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net