Search   
MSDS 
:
 4-(Phenylazo)diphenylamine, 97%
CAS 
:
 101-75-7
SYNONYMS 
:
 4-Anilinoazobenzene; 4-(Phenylamino)diphenylamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 101-75-7 |4-(Phenylazo)diphenylamine | 97 | 202-972-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause digestive tract disturbances. The toxicological properties
of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 101-75-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: orange to brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 83.00 - 87.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C18H15N3
Molecular Weight: 273.33

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 101-75-7: JK0185000
LD50/LC50:
Not available.
Carcinogenicity:
4-(Phenylazo)diphenylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 101-75-7: No information available.
Canada
CAS# 101-75-7 is listed on Canada's DSL List.
CAS# 101-75-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 101-75-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/30/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Dihydroxypyridine Hydrochloride, 97% 10357-84-3
Diethyl dimethylmalonate, 97% 1619-62-1
D-(-)-Pantolactone, 99% 599-04-2
1-(4-Chlorophenyl)-1-Cyclohexane- Carboxylic Acid 95% 58880-37-8
1,1,3,3-Tetramethyldisiloxane, 97+% 3277-26-7
3,6-Dithia-1,8-Octanediol, 98% 5244-34-8
4-Biphenylcarboxaldehyde, 99% 3215-64-3
3-Indolebutyric Acid, 98% 133-32-4
2,4-Dihydro-5-Methyl-2-(4-Nitrophenyl)-3H-Pyrazol-3-One 6402-09-1
1-Cyclohexenylacetonitrile, 92% 6975-71-9
5-Chloro-2-Iodobenzotrifluoride, 99% 23399-77-1
Diisopropyl Cyanomethylphosphonate, 97% 58264-04-3
Sulfuryl Chloride, 99% (Titr.) 7791-25-5
4-(Dimethylamino)-Benzonitrile, 95% 1197-19-9
Antimony pentafluoride, 99.5+% 7783-70-2
1-Octanethiol, 97+% 111-88-6
2,4-Lutidine, 98+% 108-47-4
2-Methylimidazole, 99% 693-98-1
Butyl Isocyanate, 99% (GC) 111-36-4
Isosafrol, 95%,mixture of cis and trans 120-58-1
3,3',5- Triiodo-L-Thyronine, Sodium Salt, 95% 55-06-1
2,6-Dimethylbenzoquinone, 97% 527-61-7
5-Carbethoxy-2-Thiouracil, 99% 38026-46-9
Piperonylic acid, 99% 94-53-1
3-Thiopheneacetic acid, 98% 6964-21-2
Bis-(Triphenylphosphine)Palladium(II) Acetate, 99% 14588-08-0
2-Fluorobenzyl chloride, 98% 345-35-7
l-Histidine methyl ester dihydrochloride, 97% 7389-87-9
Phenolphthalein Diphosphate, Tetrasodium Salt Hydrate, 99% 68807-90-9
4-(Phenylazo)diphenylamine, 97% 101-75-7
2-(N-Ethyl-meta-toluidino)ethanol, 97% 91-88-3
Didecyl phthalate, 95% (GC) 84-77-5
Dl-phenylalanine, 99% 150-30-1
Citric Acid Anhydrous 77-92-9
Lithium Benzoate, 99% 553-54-8
P-Nitrophenyl Isocyanate, 97% (Titr.) 100-28-7
1-Chloro-2-methyl-2-phenylpropane 98% 515-40-2
Copper phthalocyanine, dye content ca 95% 147-14-8
Kartamine
2,3,3-Trimethylindolenine, 98% 1640-39-7
Chloromethylated polystyrene: 1% divinylbenzene copolymer beads 70024-51-0
6-Methylquinoline, 95+% (gc) 91-62-3
3-Methylglutaric anhydride, 97%(titr.) 4166-53-4
5-Chloro-3-Ethyl-2-Methylbenzothiazolium P-Toluenesulfonate (Pract), 63149-16-6
Galvinoxyl, Free Radical, 98% 2370-18-5
Alpha-Methylcinnamaldehyde 98% 101-39-3
Propionic anhydride, p.a. 123-62-6
1,3-Dichlorobutane, 99% 1190-22-3
n-(2-Aminoethyl)-1,3-propanediamine, 97% 13531-52-7
Urocanic acid, 99% 104-98-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net