**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 108-47-4 |2,4-Lutidine | 98.0+ | 203-586-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 10 20/21 25
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable. Harmful by inhalation and in contact with skin. Toxic if
swallowed.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation. Causes irritation of mucous
membrane. Vapors may cause dizziness or suffocation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Containers may explode in the heat of a fire.
Flammable liquid and vapor.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area. Keep containers tightly
closed.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 108-47-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless to pale yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 159 deg C @ 760.00mm Hg
Freezing/Melting Point: -60 deg C
Autoignition Temperature: Not available.
Flash Point: 37 deg C ( 98.60 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: 15 g/100 g water
Specific Gravity/Density: .9270g/cm3
Molecular Formula: C7H9N
Molecular Weight: 107.15
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, exposure to
moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 108-47-4: OK9400000
LD50/LC50:
CAS# 108-47-4: Oral, rat: LD50 = 200 mg/kg.
Carcinogenicity:
2,4-Lutidine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.*
Hazard Class: 3 (6.1)
UN Number: 1992
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.
Hazard Class: 3.3 (6.1)
UN Number: 1992
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.
Hazard Class: 3 (6.1)
UN Number: 1992
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 10 Flammable.
R 20/21 Harmful by inhalation and in contact with
skin.
R 25 Toxic if swallowed.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 108-47-4: No information available.
Canada
CAS# 108-47-4 is listed on Canada's DSL List.
CAS# 108-47-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 108-47-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 11/13/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2,6-Dihydroxypyridine Hydrochloride, 97%
| 10357-84-3 |
|
Diethyl dimethylmalonate, 97%
| 1619-62-1 |
|
D-(-)-Pantolactone, 99%
| 599-04-2 |
|
1-(4-Chlorophenyl)-1-Cyclohexane- Carboxylic Acid 95%
| 58880-37-8 |
|
1,1,3,3-Tetramethyldisiloxane, 97+%
| 3277-26-7 |
|
3,6-Dithia-1,8-Octanediol, 98%
| 5244-34-8 |
|
4-Biphenylcarboxaldehyde, 99%
| 3215-64-3 |
|
3-Indolebutyric Acid, 98%
| 133-32-4 |
|
2,4-Dihydro-5-Methyl-2-(4-Nitrophenyl)-3H-Pyrazol-3-One
| 6402-09-1 |
|
1-Cyclohexenylacetonitrile, 92%
| 6975-71-9 |
|
5-Chloro-2-Iodobenzotrifluoride, 99%
| 23399-77-1 |
|
Diisopropyl Cyanomethylphosphonate, 97%
| 58264-04-3 |
|
Sulfuryl Chloride, 99% (Titr.)
| 7791-25-5 |
|
4-(Dimethylamino)-Benzonitrile, 95%
| 1197-19-9 |
|
Antimony pentafluoride, 99.5+%
| 7783-70-2 |
|
1-Octanethiol, 97+%
| 111-88-6 |
|
2,4-Lutidine, 98+%
| 108-47-4 |
|
2-Methylimidazole, 99%
| 693-98-1 |
|
Butyl Isocyanate, 99% (GC)
| 111-36-4 |
|
Isosafrol, 95%,mixture of cis and trans
| 120-58-1 |
|
3,3',5- Triiodo-L-Thyronine, Sodium Salt, 95%
| 55-06-1 |
|
2,6-Dimethylbenzoquinone, 97%
| 527-61-7 |
|
5-Carbethoxy-2-Thiouracil, 99%
| 38026-46-9 |
|
Piperonylic acid, 99%
| 94-53-1 |
|
3-Thiopheneacetic acid, 98%
| 6964-21-2 |
|
Bis-(Triphenylphosphine)Palladium(II) Acetate, 99%
| 14588-08-0 |
|
2-Fluorobenzyl chloride, 98%
| 345-35-7 |
|
l-Histidine methyl ester dihydrochloride, 97%
| 7389-87-9 |
|
Phenolphthalein Diphosphate, Tetrasodium Salt Hydrate, 99%
| 68807-90-9 |
|
4-(Phenylazo)diphenylamine, 97%
| 101-75-7 |
|
2-(N-Ethyl-meta-toluidino)ethanol, 97%
| 91-88-3 |
|
Didecyl phthalate, 95% (GC)
| 84-77-5 |
|
Dl-phenylalanine, 99%
| 150-30-1 |
|
Citric Acid Anhydrous
| 77-92-9 |
|
Lithium Benzoate, 99%
| 553-54-8 |
|
P-Nitrophenyl Isocyanate, 97% (Titr.)
| 100-28-7 |
|
1-Chloro-2-methyl-2-phenylpropane 98%
| 515-40-2 |
|
Copper phthalocyanine, dye content ca 95%
| 147-14-8 |
|
Kartamine
| |
|
2,3,3-Trimethylindolenine, 98%
| 1640-39-7 |
|
Chloromethylated polystyrene: 1% divinylbenzene copolymer beads
| 70024-51-0 |
|
6-Methylquinoline, 95+% (gc)
| 91-62-3 |
|
3-Methylglutaric anhydride, 97%(titr.)
| 4166-53-4 |
|
5-Chloro-3-Ethyl-2-Methylbenzothiazolium P-Toluenesulfonate (Pract),
| 63149-16-6 |
|
Galvinoxyl, Free Radical, 98%
| 2370-18-5 |
|
Alpha-Methylcinnamaldehyde 98%
| 101-39-3 |
|
Propionic anhydride, p.a.
| 123-62-6 |
|
1,3-Dichlorobutane, 99%
| 1190-22-3 |
|
n-(2-Aminoethyl)-1,3-propanediamine, 97%
| 13531-52-7 |
|
Urocanic acid, 99%
| 104-98-3 |
|
|