Search   
MSDS 
:
 Diethyl dimethylmalonate, 97%
CAS 
:
 1619-62-1
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1619-62-1 |Diethyl dimethylmalonate | 97 | 216-582-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Inhalation at high concentrations may cause
CNS depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Combustible liquid. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use agent most
appropriate to extinguish fire. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 1619-62-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 192 deg C @ 760.00 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 71 deg C ( 159.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.9910 g/cm3
Molecular Formula: C9H16O4
Molecular Weight: 188.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Acids, bases, oxidizing agents, reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1619-62-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Diethyl dimethylmalonate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1619-62-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1619-62-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1619-62-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Dihydroxypyridine Hydrochloride, 97% 10357-84-3
Diethyl dimethylmalonate, 97% 1619-62-1
D-(-)-Pantolactone, 99% 599-04-2
1-(4-Chlorophenyl)-1-Cyclohexane- Carboxylic Acid 95% 58880-37-8
1,1,3,3-Tetramethyldisiloxane, 97+% 3277-26-7
3,6-Dithia-1,8-Octanediol, 98% 5244-34-8
4-Biphenylcarboxaldehyde, 99% 3215-64-3
3-Indolebutyric Acid, 98% 133-32-4
2,4-Dihydro-5-Methyl-2-(4-Nitrophenyl)-3H-Pyrazol-3-One 6402-09-1
1-Cyclohexenylacetonitrile, 92% 6975-71-9
5-Chloro-2-Iodobenzotrifluoride, 99% 23399-77-1
Diisopropyl Cyanomethylphosphonate, 97% 58264-04-3
Sulfuryl Chloride, 99% (Titr.) 7791-25-5
4-(Dimethylamino)-Benzonitrile, 95% 1197-19-9
Antimony pentafluoride, 99.5+% 7783-70-2
1-Octanethiol, 97+% 111-88-6
2,4-Lutidine, 98+% 108-47-4
2-Methylimidazole, 99% 693-98-1
Butyl Isocyanate, 99% (GC) 111-36-4
Isosafrol, 95%,mixture of cis and trans 120-58-1
3,3',5- Triiodo-L-Thyronine, Sodium Salt, 95% 55-06-1
2,6-Dimethylbenzoquinone, 97% 527-61-7
5-Carbethoxy-2-Thiouracil, 99% 38026-46-9
Piperonylic acid, 99% 94-53-1
3-Thiopheneacetic acid, 98% 6964-21-2
Bis-(Triphenylphosphine)Palladium(II) Acetate, 99% 14588-08-0
2-Fluorobenzyl chloride, 98% 345-35-7
l-Histidine methyl ester dihydrochloride, 97% 7389-87-9
Phenolphthalein Diphosphate, Tetrasodium Salt Hydrate, 99% 68807-90-9
4-(Phenylazo)diphenylamine, 97% 101-75-7
2-(N-Ethyl-meta-toluidino)ethanol, 97% 91-88-3
Didecyl phthalate, 95% (GC) 84-77-5
Dl-phenylalanine, 99% 150-30-1
Citric Acid Anhydrous 77-92-9
Lithium Benzoate, 99% 553-54-8
P-Nitrophenyl Isocyanate, 97% (Titr.) 100-28-7
1-Chloro-2-methyl-2-phenylpropane 98% 515-40-2
Copper phthalocyanine, dye content ca 95% 147-14-8
Kartamine
2,3,3-Trimethylindolenine, 98% 1640-39-7
Chloromethylated polystyrene: 1% divinylbenzene copolymer beads 70024-51-0
6-Methylquinoline, 95+% (gc) 91-62-3
3-Methylglutaric anhydride, 97%(titr.) 4166-53-4
5-Chloro-3-Ethyl-2-Methylbenzothiazolium P-Toluenesulfonate (Pract), 63149-16-6
Galvinoxyl, Free Radical, 98% 2370-18-5
Alpha-Methylcinnamaldehyde 98% 101-39-3
Propionic anhydride, p.a. 123-62-6
1,3-Dichlorobutane, 99% 1190-22-3
n-(2-Aminoethyl)-1,3-propanediamine, 97% 13531-52-7
Urocanic acid, 99% 104-98-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net