Search   
MSDS 
:
 Diisopropyl Cyanomethylphosphonate, 97%
CAS 
:
 58264-04-3
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 58264-04-3 |Diisopropyl Cyanomethylphosphonate | 97 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+ C
Risk Phrases: 26/27/28 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Very toxic by inhalation, in contact with skin and if swallowed.
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Cool containers with flooding quantities of water until well after
fire is out. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Absorb spill using
an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as sawdust.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Keep container tightly closed. Do not ingest or inhale.
Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 58264-04-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: almond-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 108 - 110 deg C @ .08mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 110 deg C ( 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0390g/cm3
Molecular Formula: C8H16NO3P
Molecular Weight: 205.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, phosphine, carbon monoxide, oxides of phosphorus,
irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 58264-04-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Diisopropyl Cyanomethylphosphonate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+ C
Risk Phrases:
R 26/27/28 Very toxic by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 58264-04-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 58264-04-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 58264-04-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Dihydroxypyridine Hydrochloride, 97% 10357-84-3
Diethyl dimethylmalonate, 97% 1619-62-1
D-(-)-Pantolactone, 99% 599-04-2
1-(4-Chlorophenyl)-1-Cyclohexane- Carboxylic Acid 95% 58880-37-8
1,1,3,3-Tetramethyldisiloxane, 97+% 3277-26-7
3,6-Dithia-1,8-Octanediol, 98% 5244-34-8
4-Biphenylcarboxaldehyde, 99% 3215-64-3
3-Indolebutyric Acid, 98% 133-32-4
2,4-Dihydro-5-Methyl-2-(4-Nitrophenyl)-3H-Pyrazol-3-One 6402-09-1
1-Cyclohexenylacetonitrile, 92% 6975-71-9
5-Chloro-2-Iodobenzotrifluoride, 99% 23399-77-1
Diisopropyl Cyanomethylphosphonate, 97% 58264-04-3
Sulfuryl Chloride, 99% (Titr.) 7791-25-5
4-(Dimethylamino)-Benzonitrile, 95% 1197-19-9
Antimony pentafluoride, 99.5+% 7783-70-2
1-Octanethiol, 97+% 111-88-6
2,4-Lutidine, 98+% 108-47-4
2-Methylimidazole, 99% 693-98-1
Butyl Isocyanate, 99% (GC) 111-36-4
Isosafrol, 95%,mixture of cis and trans 120-58-1
3,3',5- Triiodo-L-Thyronine, Sodium Salt, 95% 55-06-1
2,6-Dimethylbenzoquinone, 97% 527-61-7
5-Carbethoxy-2-Thiouracil, 99% 38026-46-9
Piperonylic acid, 99% 94-53-1
3-Thiopheneacetic acid, 98% 6964-21-2
Bis-(Triphenylphosphine)Palladium(II) Acetate, 99% 14588-08-0
2-Fluorobenzyl chloride, 98% 345-35-7
l-Histidine methyl ester dihydrochloride, 97% 7389-87-9
Phenolphthalein Diphosphate, Tetrasodium Salt Hydrate, 99% 68807-90-9
4-(Phenylazo)diphenylamine, 97% 101-75-7
2-(N-Ethyl-meta-toluidino)ethanol, 97% 91-88-3
Didecyl phthalate, 95% (GC) 84-77-5
Dl-phenylalanine, 99% 150-30-1
Citric Acid Anhydrous 77-92-9
Lithium Benzoate, 99% 553-54-8
P-Nitrophenyl Isocyanate, 97% (Titr.) 100-28-7
1-Chloro-2-methyl-2-phenylpropane 98% 515-40-2
Copper phthalocyanine, dye content ca 95% 147-14-8
Kartamine
2,3,3-Trimethylindolenine, 98% 1640-39-7
Chloromethylated polystyrene: 1% divinylbenzene copolymer beads 70024-51-0
6-Methylquinoline, 95+% (gc) 91-62-3
3-Methylglutaric anhydride, 97%(titr.) 4166-53-4
5-Chloro-3-Ethyl-2-Methylbenzothiazolium P-Toluenesulfonate (Pract), 63149-16-6
Galvinoxyl, Free Radical, 98% 2370-18-5
Alpha-Methylcinnamaldehyde 98% 101-39-3
Propionic anhydride, p.a. 123-62-6
1,3-Dichlorobutane, 99% 1190-22-3
n-(2-Aminoethyl)-1,3-propanediamine, 97% 13531-52-7
Urocanic acid, 99% 104-98-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net