Search   
MSDS 
:
 1,1,3,3-Tetramethyldisiloxane, 97+%
CAS 
:
 3277-26-7
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3277-26-7 |1,1,3,3-Tetramethyldisiloxane | 97% | 221-906-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.Moisture sensitive.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause cardiac disturbances. Ingestion of large amounts
may cause CNS depression.
Inhalation:
May cause respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May cause
cardiac abnormalities. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. Runoff from fire control or
dilution water may cause pollution. Runoff to sewer may create fire
or explosion hazard.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Do NOT get water inside containers. Do NOT use straight
streams of water. For large fires, use water spray, fog or regular
foam. For small fires, use dry chemical, carbon dioxide, water spray
or regular foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers. A vapor suppressing foam may be
used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid breathing dust, vapor, mist, or gas. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not allow contact with water. Use only
in a chemical fume hood. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames. Keep from contact with moist air and steam.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Keep under a nitrogen blanket. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 3277-26-7:
United Kingdom, WEL - TWA: (listed as silica, amorphous): 6 mg/m3
(inhalable dust); 2.4 mg/m3 TWA (respirable dust)
United Kingdom, WEL - STEL: (listed as silica, amorphous): 18 mg/
STEL (inhalable dust); 7.2 mg/m3 STEL (respirable dust)

Russia: (listed as silica, amorphous): 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 71 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: 240 deg C ( 464.00 deg F)
Flash Point: -20 deg C ( -4.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: decomposes in water
Specific Gravity/Density: .7600g/cm3
Molecular Formula: ??(CH3)2SiH!2O
Molecular Weight: 134.33

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
strong oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong acids, strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, silicon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3277-26-7: JN1000000
LD50/LC50:
CAS# 3277-26-7: Inhalation, mouse: LC50 = 400 gm/m3/2H; Oral, mouse:
LD50 = 3 gm/kg.
Carcinogenicity:
1,1,3,3-Tetramethyldisiloxane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.1
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 3277-26-7: No information available.
Canada
CAS# 3277-26-7 is listed on Canada's NDSL List.
CAS# 3277-26-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3277-26-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Dihydroxypyridine Hydrochloride, 97% 10357-84-3
Diethyl dimethylmalonate, 97% 1619-62-1
D-(-)-Pantolactone, 99% 599-04-2
1-(4-Chlorophenyl)-1-Cyclohexane- Carboxylic Acid 95% 58880-37-8
1,1,3,3-Tetramethyldisiloxane, 97+% 3277-26-7
3,6-Dithia-1,8-Octanediol, 98% 5244-34-8
4-Biphenylcarboxaldehyde, 99% 3215-64-3
3-Indolebutyric Acid, 98% 133-32-4
2,4-Dihydro-5-Methyl-2-(4-Nitrophenyl)-3H-Pyrazol-3-One 6402-09-1
1-Cyclohexenylacetonitrile, 92% 6975-71-9
5-Chloro-2-Iodobenzotrifluoride, 99% 23399-77-1
Diisopropyl Cyanomethylphosphonate, 97% 58264-04-3
Sulfuryl Chloride, 99% (Titr.) 7791-25-5
4-(Dimethylamino)-Benzonitrile, 95% 1197-19-9
Antimony pentafluoride, 99.5+% 7783-70-2
1-Octanethiol, 97+% 111-88-6
2,4-Lutidine, 98+% 108-47-4
2-Methylimidazole, 99% 693-98-1
Butyl Isocyanate, 99% (GC) 111-36-4
Isosafrol, 95%,mixture of cis and trans 120-58-1
3,3',5- Triiodo-L-Thyronine, Sodium Salt, 95% 55-06-1
2,6-Dimethylbenzoquinone, 97% 527-61-7
5-Carbethoxy-2-Thiouracil, 99% 38026-46-9
Piperonylic acid, 99% 94-53-1
3-Thiopheneacetic acid, 98% 6964-21-2
Bis-(Triphenylphosphine)Palladium(II) Acetate, 99% 14588-08-0
2-Fluorobenzyl chloride, 98% 345-35-7
l-Histidine methyl ester dihydrochloride, 97% 7389-87-9
Phenolphthalein Diphosphate, Tetrasodium Salt Hydrate, 99% 68807-90-9
4-(Phenylazo)diphenylamine, 97% 101-75-7
2-(N-Ethyl-meta-toluidino)ethanol, 97% 91-88-3
Didecyl phthalate, 95% (GC) 84-77-5
Dl-phenylalanine, 99% 150-30-1
Citric Acid Anhydrous 77-92-9
Lithium Benzoate, 99% 553-54-8
P-Nitrophenyl Isocyanate, 97% (Titr.) 100-28-7
1-Chloro-2-methyl-2-phenylpropane 98% 515-40-2
Copper phthalocyanine, dye content ca 95% 147-14-8
Kartamine
2,3,3-Trimethylindolenine, 98% 1640-39-7
Chloromethylated polystyrene: 1% divinylbenzene copolymer beads 70024-51-0
6-Methylquinoline, 95+% (gc) 91-62-3
3-Methylglutaric anhydride, 97%(titr.) 4166-53-4
5-Chloro-3-Ethyl-2-Methylbenzothiazolium P-Toluenesulfonate (Pract), 63149-16-6
Galvinoxyl, Free Radical, 98% 2370-18-5
Alpha-Methylcinnamaldehyde 98% 101-39-3
Propionic anhydride, p.a. 123-62-6
1,3-Dichlorobutane, 99% 1190-22-3
n-(2-Aminoethyl)-1,3-propanediamine, 97% 13531-52-7
Urocanic acid, 99% 104-98-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net