Search   
MSDS 
:
 2-Ethylhexylamine 99%
CAS 
:
 104-75-6
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 104-75-6 |2-Ethylhexylamine | 99 | 203-233-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 20/21/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful by inhalation, in contact with skin and if
swallowed. Causes burns.Corrosive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
Harmful if absorbed through the skin. Causes severe skin irritation
and possible burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal irritation with
nausea, vomiting and diarrhea. May cause burns to the
gastrointestinal tract.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Vapors may cause dizziness
or suffocation.
Chronic:
May cause liver and kidney damage. Prolonged exposure may cause
systemic effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Flammable liquid and vapor. Vapors may
be heavier than air. They can spread along the ground and collect in
low or confined areas.
Extinguishing Media:
Use dry chemical, carbon dioxide, or alcohol-resistant foam. Contact
professional fire-fighters immediately.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Provide ventilation. Cover with a 90:10
mixture of sand/soda ash. Place in a container. Flush area with
water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Do not get in
eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Do not ingest
or inhale. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a cool,
dry, well-ventilated area away from incompatible substances. Keep
away from strong acids. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 104-75-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear
Odor: musky, ammonia odor
pH: Not available.
Vapor Pressure: 1.6 hPa @ 20 C
Viscosity: 1.1 MPA 20.00 deg C
Boiling Point: 169 deg C @ 760.00mm Hg
Freezing/Melting Point: -76 deg C
Autoignition Temperature: 295 deg C ( 563.00 deg F)
Flash Point: 50 deg C ( 122.00 deg F)
Explosion Limits, lower: .80 vol %
Explosion Limits, upper: 6.00 vol %
Decomposition Temperature:
Solubility in water: 2.5 g/l (20 c)
Specific Gravity/Density: .7890g/cm3
Molecular Formula: C8H19N
Molecular Weight: 129.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, metals, excess heat, electrical sparks, exposure to
flame.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, alcohols, aluminum, copper,
vinyl acetate, zinc, tin, aldehydes (e.g. acetaldehyde, acrolein,
chloral hydrate, formaldehyde), isocyanates (e.g. methyl
isocyanate), ketones (e.g. acetone, acetophenone, MEK, MIBK), lead,
organic anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 104-75-6: MQ5250000
LD50/LC50:
CAS# 104-75-6: Draize test, rabbit, eye: 50 ug/24H Severe; Draize
test, rabbit, skin: 750 ug/24H Severe; Oral, rat: LD50 = 450 mg/kg;
Skin, rabbit: LD50 = 600 uL/kg.
Carcinogenicity:
2-Ethylhexylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: 2-ETHYLHEXYLAMINE
Hazard Class: 3 (8)
UN Number: 2276
Packing Group: III
IMO
Shipping Name: 2-ETHYLHEXYLAMINE
Hazard Class: 3.3 (8)
UN Number: 2276
Packing Group: III
RID/ADR
Shipping Name: 2-ETHYLHEXYLAMINE
Hazard Class: 3
UN Number: 2276
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 104-75-6: 2
Canada
CAS# 104-75-6 is listed on Canada's DSL List.
CAS# 104-75-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 104-75-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/05/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Phloroglucinol 108-73-6
Tetrapropylammonium bromide, 98% 1941-30-6
Octacosanoic acid, 99+% 506-48-9
n-Hexyl Sulfide, 95% 6294-31-1
cis-2-Amino-1-cyclopentanecarboxylic acid, 98+% 37910-65-9
Dimethyl 5-Sulfoisophthalate, Sodium Salt, Hydrate, 98% 3965-55-7
Phosphoric acid, 85% 7664-38-2
Phosphorus Pentoxide 1314-56-3
P-Tolyl Disulfide, 98% 103-19-5
1-Bromo-2-Propanol, Tech., 70%, Remainder 2-Bromo-1-Propanol 19686-73-8
1,2-Difluorobenzene, 98% 367-11-3
Glyoxal di(sodium bisulfite) 517-21-5
Phosphorus Oxychloride 10025-87-3
Potassium Osmate(VI) Dihydrate 19718-36-6
Tetrabutylammonium Chloride (50% in Water) 1112-67-0
3,3'-Diethylthiatricarbocyanine perchlorate, laser grade 22268-66-2
3-Aminopyrazole, 98% 1820-80-0
Undecanoic Acid, 99% 112-37-8
Glycine Hydrochloride, 99% (Titr.) 6000-43-7
Phosphotungstic acid 12067-99-1
Phthalaldehyde 643-79-8
Benzophenone hydrazone, 98+% 5350-57-2
4-Hexadecyloxybenzoic acid, 98% 15872-48-7
Boron trifluoride etherate, ca. 48% bf3 109-63-7
1,7-Heptanediol, 95% 629-30-1
Picric acid, wetted with at least 30% water, by mass 88-89-1
5-Methylindole, 99% 614-96-0
n-Isopropylbenzylamine, 97% 102-97-6
p-Bromoanisole, 95% (gc) 104-92-7
3,3'-(4,4'-Biphenylene)bis(2,5-diphenyl-2H-tetrazolium chloride), 95% 298-95-3
2-(P-Toluenesulfonyl)Acetamide 52345-47-8
4-Methylsulphonyl Benzonitrile, 95+% 22821-76-7
Piperidine 110-89-4
2,4-Dimethylbenzenesulfonic acid sodium salt, 95% (uv-vis) 827-21-4
Propyl Sulfone 598-03-8
Cis-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+% 54162-90-2
Methyl Hexanoate, 98% (GC) 106-70-7
4-Methyl-2H-Imidazole-1-Oxide-2-Spirocyclo Hexane, 99.5+% 0-01-1
2-Ethylhexylamine 99% 104-75-6
Naphthalene-Bis(Hexachlorocyclopentadiene) Adduct, 99% 5696-92-4
4-Amino-3-Nitrobenzoic Acid, 98% (UV-Vis) 1588-83-6
Isoeugenol, 99%, Cis/Trans Mixture 97-54-1
2,4-Dichloro-3-ethylphenol 121518-45-
Platinium (IV) potassium chloride 16921-30-5
Ethyl 4,4,4-Trifluoroacetoacetate, 97% 372-31-6
2-Methyl-1-(3-sulfopropyl)naphtho(1,2-d) thiazolium inner salt, 95% 3176-77-0
P-Bromophenethyl Alcohol, 99% 4654-39-1
Ethyl 3,3-diethoxypropanoate, 98% 10601-80-6
4'-(Benzyloxy)-2-bromopropiophenone, 97% 0-00-1
Tryptamine hydrochloride, 98% 343-94-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net