Search   
MSDS 
:
 Isoeugenol, 99%, Cis/Trans Mixture
CAS 
:
 97-54-1
SYNONYMS 
:
 2-Methoxy-4-Propenylphenol
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 97-54-1 |Isoeugenol | 99 | 202-590-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
Inhalation of vapor may cause respiratory tract irritation. May
cause respiratory difficulty and coughing.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation. Use with adequate ventilation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 97-54-1:


Personal Protective Equipment

Eyes:
Wear safety glasses and chemical goggles if splashing
is possible.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 266-268 deg C @ 760.00mmHg
Freezing/Melting Point: -10 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: solvents
Specific Gravity/Density:
Molecular Formula: C10H12O2
Molecular Weight: 164.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 97-54-1: SL7875000
LD50/LC50:
CAS# 97-54-1: Draize test, rabbit, skin: 100 mg/24H Severe; Oral,
rat: LD50 = 1560 mg/kg.
Carcinogenicity:
Isoeugenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 38 Irritating to skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 97-54-1: No information available.
Canada
CAS# 97-54-1 is listed on Canada's DSL List.
CAS# 97-54-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 97-54-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/28/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Phloroglucinol 108-73-6
Tetrapropylammonium bromide, 98% 1941-30-6
Octacosanoic acid, 99+% 506-48-9
n-Hexyl Sulfide, 95% 6294-31-1
cis-2-Amino-1-cyclopentanecarboxylic acid, 98+% 37910-65-9
Dimethyl 5-Sulfoisophthalate, Sodium Salt, Hydrate, 98% 3965-55-7
Phosphoric acid, 85% 7664-38-2
Phosphorus Pentoxide 1314-56-3
P-Tolyl Disulfide, 98% 103-19-5
1-Bromo-2-Propanol, Tech., 70%, Remainder 2-Bromo-1-Propanol 19686-73-8
1,2-Difluorobenzene, 98% 367-11-3
Glyoxal di(sodium bisulfite) 517-21-5
Phosphorus Oxychloride 10025-87-3
Potassium Osmate(VI) Dihydrate 19718-36-6
Tetrabutylammonium Chloride (50% in Water) 1112-67-0
3,3'-Diethylthiatricarbocyanine perchlorate, laser grade 22268-66-2
3-Aminopyrazole, 98% 1820-80-0
Undecanoic Acid, 99% 112-37-8
Glycine Hydrochloride, 99% (Titr.) 6000-43-7
Phosphotungstic acid 12067-99-1
Phthalaldehyde 643-79-8
Benzophenone hydrazone, 98+% 5350-57-2
4-Hexadecyloxybenzoic acid, 98% 15872-48-7
Boron trifluoride etherate, ca. 48% bf3 109-63-7
1,7-Heptanediol, 95% 629-30-1
Picric acid, wetted with at least 30% water, by mass 88-89-1
5-Methylindole, 99% 614-96-0
n-Isopropylbenzylamine, 97% 102-97-6
p-Bromoanisole, 95% (gc) 104-92-7
3,3'-(4,4'-Biphenylene)bis(2,5-diphenyl-2H-tetrazolium chloride), 95% 298-95-3
2-(P-Toluenesulfonyl)Acetamide 52345-47-8
4-Methylsulphonyl Benzonitrile, 95+% 22821-76-7
Piperidine 110-89-4
2,4-Dimethylbenzenesulfonic acid sodium salt, 95% (uv-vis) 827-21-4
Propyl Sulfone 598-03-8
Cis-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+% 54162-90-2
Methyl Hexanoate, 98% (GC) 106-70-7
4-Methyl-2H-Imidazole-1-Oxide-2-Spirocyclo Hexane, 99.5+% 0-01-1
2-Ethylhexylamine 99% 104-75-6
Naphthalene-Bis(Hexachlorocyclopentadiene) Adduct, 99% 5696-92-4
4-Amino-3-Nitrobenzoic Acid, 98% (UV-Vis) 1588-83-6
Isoeugenol, 99%, Cis/Trans Mixture 97-54-1
2,4-Dichloro-3-ethylphenol 121518-45-
Platinium (IV) potassium chloride 16921-30-5
Ethyl 4,4,4-Trifluoroacetoacetate, 97% 372-31-6
2-Methyl-1-(3-sulfopropyl)naphtho(1,2-d) thiazolium inner salt, 95% 3176-77-0
P-Bromophenethyl Alcohol, 99% 4654-39-1
Ethyl 3,3-diethoxypropanoate, 98% 10601-80-6
4'-(Benzyloxy)-2-bromopropiophenone, 97% 0-00-1
Tryptamine hydrochloride, 98% 343-94-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net