Search   
MSDS 
:
 Potassium Osmate(VI) Dihydrate
CAS 
:
 19718-36-6
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 19718-36-6 |Potassium Osmate(VI) Dihydrate | 100 | 243-247-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 19718-36-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions. Follow the OSHA respirator regulations
found in 29 CFR 1910.134 or European Standard EN 149.
Use a NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: violet
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: K2O4Os.2H2O
Molecular Weight: 368.42

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, oxides of potassium.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 19718-36-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Potassium Osmate(VI) Dihydrate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, INORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 3288
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, INORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 3288
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, INORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 3288
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 19718-36-6: No information available.
Canada
CAS# 19718-36-6 is listed on Canada's NDSL List.
CAS# 19718-36-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 19718-36-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/26/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Phloroglucinol 108-73-6
Tetrapropylammonium bromide, 98% 1941-30-6
Octacosanoic acid, 99+% 506-48-9
n-Hexyl Sulfide, 95% 6294-31-1
cis-2-Amino-1-cyclopentanecarboxylic acid, 98+% 37910-65-9
Dimethyl 5-Sulfoisophthalate, Sodium Salt, Hydrate, 98% 3965-55-7
Phosphoric acid, 85% 7664-38-2
Phosphorus Pentoxide 1314-56-3
P-Tolyl Disulfide, 98% 103-19-5
1-Bromo-2-Propanol, Tech., 70%, Remainder 2-Bromo-1-Propanol 19686-73-8
1,2-Difluorobenzene, 98% 367-11-3
Glyoxal di(sodium bisulfite) 517-21-5
Phosphorus Oxychloride 10025-87-3
Potassium Osmate(VI) Dihydrate 19718-36-6
Tetrabutylammonium Chloride (50% in Water) 1112-67-0
3,3'-Diethylthiatricarbocyanine perchlorate, laser grade 22268-66-2
3-Aminopyrazole, 98% 1820-80-0
Undecanoic Acid, 99% 112-37-8
Glycine Hydrochloride, 99% (Titr.) 6000-43-7
Phosphotungstic acid 12067-99-1
Phthalaldehyde 643-79-8
Benzophenone hydrazone, 98+% 5350-57-2
4-Hexadecyloxybenzoic acid, 98% 15872-48-7
Boron trifluoride etherate, ca. 48% bf3 109-63-7
1,7-Heptanediol, 95% 629-30-1
Picric acid, wetted with at least 30% water, by mass 88-89-1
5-Methylindole, 99% 614-96-0
n-Isopropylbenzylamine, 97% 102-97-6
p-Bromoanisole, 95% (gc) 104-92-7
3,3'-(4,4'-Biphenylene)bis(2,5-diphenyl-2H-tetrazolium chloride), 95% 298-95-3
2-(P-Toluenesulfonyl)Acetamide 52345-47-8
4-Methylsulphonyl Benzonitrile, 95+% 22821-76-7
Piperidine 110-89-4
2,4-Dimethylbenzenesulfonic acid sodium salt, 95% (uv-vis) 827-21-4
Propyl Sulfone 598-03-8
Cis-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+% 54162-90-2
Methyl Hexanoate, 98% (GC) 106-70-7
4-Methyl-2H-Imidazole-1-Oxide-2-Spirocyclo Hexane, 99.5+% 0-01-1
2-Ethylhexylamine 99% 104-75-6
Naphthalene-Bis(Hexachlorocyclopentadiene) Adduct, 99% 5696-92-4
4-Amino-3-Nitrobenzoic Acid, 98% (UV-Vis) 1588-83-6
Isoeugenol, 99%, Cis/Trans Mixture 97-54-1
2,4-Dichloro-3-ethylphenol 121518-45-
Platinium (IV) potassium chloride 16921-30-5
Ethyl 4,4,4-Trifluoroacetoacetate, 97% 372-31-6
2-Methyl-1-(3-sulfopropyl)naphtho(1,2-d) thiazolium inner salt, 95% 3176-77-0
P-Bromophenethyl Alcohol, 99% 4654-39-1
Ethyl 3,3-diethoxypropanoate, 98% 10601-80-6
4'-(Benzyloxy)-2-bromopropiophenone, 97% 0-00-1
Tryptamine hydrochloride, 98% 343-94-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net