Search   
MSDS 
:
 Tetrabutylammonium Chloride (50% in Water)
CAS 
:
 1112-67-0
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 1112-67-0 |Tetrabutylammonium chloride | 50% | 214-195-7 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Can produce delayed
pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up
or absorb material, then place into a suitable clean, dry, closed
container for disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Use with adequate ventilation. Wash clothing before
reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1112-67-0:

CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear light yellow
Odor: odorless to slight amine-like odor
pH: Not available.
Vapor Pressure: 18 mm Hg @ 20 deg C
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C16H36ClN
Molecular Weight: 277.91

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1112-67-0 unlisted.
CAS# 7732-18-5: ZC0110000
LD50/LC50:
Not available.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Tetrabutylammonium chloride -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1112-67-0: No information available.
CAS# 7732-18-5: No information available.
Canada
CAS# 1112-67-0 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 1112-67-0 is not listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1112-67-0 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 36/37/38 Irritating to eyes, respiratory system and
skin.
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Phloroglucinol 108-73-6
Tetrapropylammonium bromide, 98% 1941-30-6
Octacosanoic acid, 99+% 506-48-9
n-Hexyl Sulfide, 95% 6294-31-1
cis-2-Amino-1-cyclopentanecarboxylic acid, 98+% 37910-65-9
Dimethyl 5-Sulfoisophthalate, Sodium Salt, Hydrate, 98% 3965-55-7
Phosphoric acid, 85% 7664-38-2
Phosphorus Pentoxide 1314-56-3
P-Tolyl Disulfide, 98% 103-19-5
1-Bromo-2-Propanol, Tech., 70%, Remainder 2-Bromo-1-Propanol 19686-73-8
1,2-Difluorobenzene, 98% 367-11-3
Glyoxal di(sodium bisulfite) 517-21-5
Phosphorus Oxychloride 10025-87-3
Potassium Osmate(VI) Dihydrate 19718-36-6
Tetrabutylammonium Chloride (50% in Water) 1112-67-0
3,3'-Diethylthiatricarbocyanine perchlorate, laser grade 22268-66-2
3-Aminopyrazole, 98% 1820-80-0
Undecanoic Acid, 99% 112-37-8
Glycine Hydrochloride, 99% (Titr.) 6000-43-7
Phosphotungstic acid 12067-99-1
Phthalaldehyde 643-79-8
Benzophenone hydrazone, 98+% 5350-57-2
4-Hexadecyloxybenzoic acid, 98% 15872-48-7
Boron trifluoride etherate, ca. 48% bf3 109-63-7
1,7-Heptanediol, 95% 629-30-1
Picric acid, wetted with at least 30% water, by mass 88-89-1
5-Methylindole, 99% 614-96-0
n-Isopropylbenzylamine, 97% 102-97-6
p-Bromoanisole, 95% (gc) 104-92-7
3,3'-(4,4'-Biphenylene)bis(2,5-diphenyl-2H-tetrazolium chloride), 95% 298-95-3
2-(P-Toluenesulfonyl)Acetamide 52345-47-8
4-Methylsulphonyl Benzonitrile, 95+% 22821-76-7
Piperidine 110-89-4
2,4-Dimethylbenzenesulfonic acid sodium salt, 95% (uv-vis) 827-21-4
Propyl Sulfone 598-03-8
Cis-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+% 54162-90-2
Methyl Hexanoate, 98% (GC) 106-70-7
4-Methyl-2H-Imidazole-1-Oxide-2-Spirocyclo Hexane, 99.5+% 0-01-1
2-Ethylhexylamine 99% 104-75-6
Naphthalene-Bis(Hexachlorocyclopentadiene) Adduct, 99% 5696-92-4
4-Amino-3-Nitrobenzoic Acid, 98% (UV-Vis) 1588-83-6
Isoeugenol, 99%, Cis/Trans Mixture 97-54-1
2,4-Dichloro-3-ethylphenol 121518-45-
Platinium (IV) potassium chloride 16921-30-5
Ethyl 4,4,4-Trifluoroacetoacetate, 97% 372-31-6
2-Methyl-1-(3-sulfopropyl)naphtho(1,2-d) thiazolium inner salt, 95% 3176-77-0
P-Bromophenethyl Alcohol, 99% 4654-39-1
Ethyl 3,3-diethoxypropanoate, 98% 10601-80-6
4'-(Benzyloxy)-2-bromopropiophenone, 97% 0-00-1
Tryptamine hydrochloride, 98% 343-94-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net