**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 298-95-3 |3,3'-(4,4'-Biphenylene)bis(2,5-dipheny| 95 | 206-070-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Light sensitive.The toxicological properties of this material have
not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
No data found on whether or not this chemical would be likely to
cause an allergic skin reaction.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid breathing dust.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store protected from light.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 298-95-3:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: beige to brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 230 deg C (dec)
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 230 deg C
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C38H28Cl2N8
Molecular Weight: 667.59
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. May discolor on
exposure to light.
Conditions to Avoid:
Light, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 298-95-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3,3'-(4,4'-Biphenylene)bis(2,5-diphenyl-2H-tetrazolium chloride) -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 298-95-3: No information available.
Canada
CAS# 298-95-3 is listed on Canada's NDSL List.
CAS# 298-95-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 298-95-3 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 2/20/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Phloroglucinol
| 108-73-6 |
|
Tetrapropylammonium bromide, 98%
| 1941-30-6 |
|
Octacosanoic acid, 99+%
| 506-48-9 |
|
n-Hexyl Sulfide, 95%
| 6294-31-1 |
|
cis-2-Amino-1-cyclopentanecarboxylic acid, 98+%
| 37910-65-9 |
|
Dimethyl 5-Sulfoisophthalate, Sodium Salt, Hydrate, 98%
| 3965-55-7 |
|
Phosphoric acid, 85%
| 7664-38-2 |
|
Phosphorus Pentoxide
| 1314-56-3 |
|
P-Tolyl Disulfide, 98%
| 103-19-5 |
|
1-Bromo-2-Propanol, Tech., 70%, Remainder 2-Bromo-1-Propanol
| 19686-73-8 |
|
1,2-Difluorobenzene, 98%
| 367-11-3 |
|
Glyoxal di(sodium bisulfite)
| 517-21-5 |
|
Phosphorus Oxychloride
| 10025-87-3 |
|
Potassium Osmate(VI) Dihydrate
| 19718-36-6 |
|
Tetrabutylammonium Chloride (50% in Water)
| 1112-67-0 |
|
3,3'-Diethylthiatricarbocyanine perchlorate, laser grade
| 22268-66-2 |
|
3-Aminopyrazole, 98%
| 1820-80-0 |
|
Undecanoic Acid, 99%
| 112-37-8 |
|
Glycine Hydrochloride, 99% (Titr.)
| 6000-43-7 |
|
Phosphotungstic acid
| 12067-99-1 |
|
Phthalaldehyde
| 643-79-8 |
|
Benzophenone hydrazone, 98+%
| 5350-57-2 |
|
4-Hexadecyloxybenzoic acid, 98%
| 15872-48-7 |
|
Boron trifluoride etherate, ca. 48% bf3
| 109-63-7 |
|
1,7-Heptanediol, 95%
| 629-30-1 |
|
Picric acid, wetted with at least 30% water, by mass
| 88-89-1 |
|
5-Methylindole, 99%
| 614-96-0 |
|
n-Isopropylbenzylamine, 97%
| 102-97-6 |
|
p-Bromoanisole, 95% (gc)
| 104-92-7 |
|
3,3'-(4,4'-Biphenylene)bis(2,5-diphenyl-2H-tetrazolium chloride), 95%
| 298-95-3 |
|
2-(P-Toluenesulfonyl)Acetamide
| 52345-47-8 |
|
4-Methylsulphonyl Benzonitrile, 95+%
| 22821-76-7 |
|
Piperidine
| 110-89-4 |
|
2,4-Dimethylbenzenesulfonic acid sodium salt, 95% (uv-vis)
| 827-21-4 |
|
Propyl Sulfone
| 598-03-8 |
|
Cis-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+%
| 54162-90-2 |
|
Methyl Hexanoate, 98% (GC)
| 106-70-7 |
|
4-Methyl-2H-Imidazole-1-Oxide-2-Spirocyclo Hexane, 99.5+%
| 0-01-1 |
|
2-Ethylhexylamine 99%
| 104-75-6 |
|
Naphthalene-Bis(Hexachlorocyclopentadiene) Adduct, 99%
| 5696-92-4 |
|
4-Amino-3-Nitrobenzoic Acid, 98% (UV-Vis)
| 1588-83-6 |
|
Isoeugenol, 99%, Cis/Trans Mixture
| 97-54-1 |
|
2,4-Dichloro-3-ethylphenol
| 121518-45- |
|
Platinium (IV) potassium chloride
| 16921-30-5 |
|
Ethyl 4,4,4-Trifluoroacetoacetate, 97%
| 372-31-6 |
|
2-Methyl-1-(3-sulfopropyl)naphtho(1,2-d) thiazolium inner salt, 95%
| 3176-77-0 |
|
P-Bromophenethyl Alcohol, 99%
| 4654-39-1 |
|
Ethyl 3,3-diethoxypropanoate, 98%
| 10601-80-6 |
|
4'-(Benzyloxy)-2-bromopropiophenone, 97%
| 0-00-1 |
|
Tryptamine hydrochloride, 98%
| 343-94-2 |
|
|