Search   
MSDS 
:
 N,N'-Dimethylethylenediamine
CAS 
:
 110-70-3
SYNONYMS 
:
 Sym-Dimethylethylenediamine; 1,2-Bis(methylamino)ethane.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-70-3 |N,N'-Dimethylethylenediamine | 85+% | 203-793-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 20/21/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful by inhalation, in contact with skin and if
swallowed. Causes burns.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause headache.
Inhalation:
Causes chemical burns to the respiratory tract. Vapors may cause
dizziness or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
During a fire, irritating and highly toxic gases may be generated by
thermal decomposition or combustion. Will burn if involved in a fire.
Use water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. Water may be ineffective.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Take
precautionary measures against static discharges. Do not ingest or
inhale. Use only in a chemical fume hood. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Keep container closed when not
in use. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 110-70-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 119 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 26 deg C ( 78.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .819g/cm3
Molecular Formula: C4H12N2
Molecular Weight: 88.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Acids, acid chlorides, anhydrides, strong oxidizing agents, carbon
dioxide.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-70-3: KV4250000
LD50/LC50:
Not available.
Carcinogenicity:
N,N'-Dimethylethylenediamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.*
Hazard Class: 8 (3)
UN Number: 2734
Packing Group: II
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8 (3)
UN Number: 2734
Packing Group: II
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2734
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 110-70-3: No information available.
Canada
CAS# 110-70-3 is listed on Canada's NDSL List.
CAS# 110-70-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-70-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/01/1998 Revision #4 Date: 11/10/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Choline (Pract) (45% in Methanol) 62-49-7
2-Phenylpyridine, 98% 1008-89-5
Potassium Thioacetate, 98+% 10387-40-3
??-Propiolactone, 98% 57-57-8
Ethyl 3-iodobenzoate, 98% 58313-23-8
(+)-2,2,2-Trifluoro-1-(9-Anthryl)Ethanol, 98+% 60646-30-2
o-Acetotoluidide 120-66-1
2-Methylcyclohexanone, 98% 583-60-8
2,3-Dichlorobenzaldehyde,99% 6334-18-5
Iron Phthalocyanine, 96% (uv-vis) 132-16-1
4-Nitrophthalic Anhydride, 98% (Titr.) 5466-84-2
(+)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone 67-64-1
2-Methoxy-1-naphthaldehyde, 99% 5392-12-1
Methyl-1-methyl-2-pyrrole acetate, 96% 51856-79-2
1-Ethoxy-2-propanol,90-95%,remainder 2-eth oxy-1-propanol 1569-02-4
m-Methoxycinnamic acid, 97%, predominantly trans 6099-04-3
Carbamylcholine Chloride, 99.0-101.0% (on the Dried Substance) 51-83-2
2-methanesulphonyl-2-acetyl pyridine
2,5-Dimethylbenzoic Acid, 98% 610-72-0
6,7-Dimethoxy-3,4-Dihydroisoquinoline Hydrochloride, 99+% 20232-39-7
Tetramethylammonium Acetate, 95% (Titr.) 10581-12-1
(Chloromethylene)dimethylammonium chloride 96% (1h-nmr) 3724-43-4
o-Anisaldehyde, 98% 135-02-4
2,3-Dihydroxybenzaldehyde, 97% 24677-78-9
(S)-2-Amino-3-(Dimethylamino)propanoic Acid, Dihydrochloride, 0-00-1
Dimethylamine, 40 Wt% Solution in Water 124-40-3
n-(4-Vinylphenyl)maleimide 19007-91-1
2-Chloro-6-Fluorobenzoic Acid, 98% 434-75-3
1,2-Dicarboxy-Cis-4,5-Dihydroxycyclohexa- 2,6-Diene, 95% 130073-64-2
3-Nitrobenzyl bromide, 99% 3958-57-4
Potassium diphosphate, C.P. 7320-34-5
2-Bromothiophene, 98% 1003-09-4
2-Nonanone, 99+% 821-55-6
4-Methylesculetin 529-84-0
p-Toluic acid, 98% 99-94-5
Dilauryl Phosphite, Tech. 21302-90-9
Amberlite ir-120 na ion-exchange resin 9002-23-7
DL-Alpha-Hydroxycaproic Acid, 95+% 6064-63-7
tert-Butylhydroquinone diacetate 7507-48-4
2,5-Dimercapto-1,3,4-Thiadiazole, 98% (Titr.) 1072-71-5
n-Butyl disulfide, 98% 629-45-8
(R)-(-)-5-oxo-2-Tetrahydrofurancarboxylic acid, 99% (99% e.e.) 53558-93-3
Deuterium Bromide, 47 wt% Solution in D2O, 99+ Atom % D 7732-18-5
L-(-)-Pipecolinic Acid, 99% 3105-95-1
(S)-(+)-2-Amino-1-propanol, 98% 2749-11-3
Sodium formaldehydesulfoxylate dihydrate, 98% 6035-47-8
1-Chlorononane, 99% 2473-01-0
Allylamine, 97% 107-11-9
Triethyloxonium tetrafluoroborate, 1M solution in methylene chloride 75-09-2
N,N'-Dimethylethylenediamine 110-70-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net