**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6035-47-8 |Sodium formaldehydesulfoxylate dihydra| 98.0 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).The toxicological
properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 6035-47-8:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: white
Odor: None reported.
pH: 9.5-10.5 (10% aq.sol.)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 63.00 - 64.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: freely soluble in water
Specific Gravity/Density:
Molecular Formula: CH3NaO3S.2H2O
Molecular Weight: 154.11
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, exposure to moist air or
water.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 6035-47-8: PB0390000
LD50/LC50:
Not available.
Carcinogenicity:
Sodium formaldehydesulfoxylate dihydrate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 6035-47-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6035-47-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6035-47-8 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/12/1998 Revision #4 Date: 10/05/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Choline (Pract) (45% in Methanol)
| 62-49-7 |
|
2-Phenylpyridine, 98%
| 1008-89-5 |
|
Potassium Thioacetate, 98+%
| 10387-40-3 |
|
??-Propiolactone, 98%
| 57-57-8 |
|
Ethyl 3-iodobenzoate, 98%
| 58313-23-8 |
|
(+)-2,2,2-Trifluoro-1-(9-Anthryl)Ethanol, 98+%
| 60646-30-2 |
|
o-Acetotoluidide
| 120-66-1 |
|
2-Methylcyclohexanone, 98%
| 583-60-8 |
|
2,3-Dichlorobenzaldehyde,99%
| 6334-18-5 |
|
Iron Phthalocyanine, 96% (uv-vis)
| 132-16-1 |
|
4-Nitrophthalic Anhydride, 98% (Titr.)
| 5466-84-2 |
|
(+)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone
| 67-64-1 |
|
2-Methoxy-1-naphthaldehyde, 99%
| 5392-12-1 |
|
Methyl-1-methyl-2-pyrrole acetate, 96%
| 51856-79-2 |
|
1-Ethoxy-2-propanol,90-95%,remainder 2-eth oxy-1-propanol
| 1569-02-4 |
|
m-Methoxycinnamic acid, 97%, predominantly trans
| 6099-04-3 |
|
Carbamylcholine Chloride, 99.0-101.0% (on the Dried Substance)
| 51-83-2 |
|
2-methanesulphonyl-2-acetyl pyridine
| |
|
2,5-Dimethylbenzoic Acid, 98%
| 610-72-0 |
|
6,7-Dimethoxy-3,4-Dihydroisoquinoline Hydrochloride, 99+%
| 20232-39-7 |
|
Tetramethylammonium Acetate, 95% (Titr.)
| 10581-12-1 |
|
(Chloromethylene)dimethylammonium chloride 96% (1h-nmr)
| 3724-43-4 |
|
o-Anisaldehyde, 98%
| 135-02-4 |
|
2,3-Dihydroxybenzaldehyde, 97%
| 24677-78-9 |
|
(S)-2-Amino-3-(Dimethylamino)propanoic Acid, Dihydrochloride,
| 0-00-1 |
|
Dimethylamine, 40 Wt% Solution in Water
| 124-40-3 |
|
n-(4-Vinylphenyl)maleimide
| 19007-91-1 |
|
2-Chloro-6-Fluorobenzoic Acid, 98%
| 434-75-3 |
|
1,2-Dicarboxy-Cis-4,5-Dihydroxycyclohexa- 2,6-Diene, 95%
| 130073-64-2 |
|
3-Nitrobenzyl bromide, 99%
| 3958-57-4 |
|
Potassium diphosphate, C.P.
| 7320-34-5 |
|
2-Bromothiophene, 98%
| 1003-09-4 |
|
2-Nonanone, 99+%
| 821-55-6 |
|
4-Methylesculetin
| 529-84-0 |
|
p-Toluic acid, 98%
| 99-94-5 |
|
Dilauryl Phosphite, Tech.
| 21302-90-9 |
|
Amberlite ir-120 na ion-exchange resin
| 9002-23-7 |
|
DL-Alpha-Hydroxycaproic Acid, 95+%
| 6064-63-7 |
|
tert-Butylhydroquinone diacetate
| 7507-48-4 |
|
2,5-Dimercapto-1,3,4-Thiadiazole, 98% (Titr.)
| 1072-71-5 |
|
n-Butyl disulfide, 98%
| 629-45-8 |
|
(R)-(-)-5-oxo-2-Tetrahydrofurancarboxylic acid, 99% (99% e.e.)
| 53558-93-3 |
|
Deuterium Bromide, 47 wt% Solution in D2O, 99+ Atom % D
| 7732-18-5 |
|
L-(-)-Pipecolinic Acid, 99%
| 3105-95-1 |
|
(S)-(+)-2-Amino-1-propanol, 98%
| 2749-11-3 |
|
Sodium formaldehydesulfoxylate dihydrate, 98%
| 6035-47-8 |
|
1-Chlorononane, 99%
| 2473-01-0 |
|
Allylamine, 97%
| 107-11-9 |
|
Triethyloxonium tetrafluoroborate, 1M solution in methylene chloride
| 75-09-2 |
|
N,N'-Dimethylethylenediamine
| 110-70-3 |
|
|