**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3724-43-4 |(Chloromethylene)dimethylammonium chlo| 96% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 14 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Reacts violently with water. Causes burns.Corrosive.The
toxicological properties of this material have not been fully
investigated.Water-reactive.Moisture sensitive.
Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
May cause severe irritation and possible burns.
Ingestion:
Causes gastrointestinal tract burns. The toxicological properties of
this substance have not been fully investigated.
Inhalation:
Causes chemical burns to the respiratory tract. May cause abdominal
pain, nausea, vomiting, and inflammation of the gums and mouth. The
toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Avoid breathing dust, vapor, mist, or gas. Do
not get in eyes, on skin, or on clothing. Do not ingest or inhale.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Water free area. Keep refrigerated. (Store below 4C/39F.) Water
free area - refrigerator.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Good general ventilation should be sufficient to control airborne
levels.
Exposure Limits
CAS# 3724-43-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: light brown to yellow-brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 139 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts with water
Specific Gravity/Density:
Molecular Formula: C3H7Cl2N
Molecular Weight: 128.00
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Combines vigorously
with water with the evolution of heat.
Conditions to Avoid:
High temperatures, incompatible materials, contact with water.
Incompatibilities with Other Materials:
Strong oxidizing agents, moist air, water, amines, and bases.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 3724-43-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(Chloromethylene)dimethylammonium chloride, 96% -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 30 Never add water to this product.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 3724-43-4: No information available.
Canada
CAS# 3724-43-4 is listed on Canada's NDSL List.
CAS# 3724-43-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3724-43-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Choline (Pract) (45% in Methanol)
| 62-49-7 |
|
2-Phenylpyridine, 98%
| 1008-89-5 |
|
Potassium Thioacetate, 98+%
| 10387-40-3 |
|
??-Propiolactone, 98%
| 57-57-8 |
|
Ethyl 3-iodobenzoate, 98%
| 58313-23-8 |
|
(+)-2,2,2-Trifluoro-1-(9-Anthryl)Ethanol, 98+%
| 60646-30-2 |
|
o-Acetotoluidide
| 120-66-1 |
|
2-Methylcyclohexanone, 98%
| 583-60-8 |
|
2,3-Dichlorobenzaldehyde,99%
| 6334-18-5 |
|
Iron Phthalocyanine, 96% (uv-vis)
| 132-16-1 |
|
4-Nitrophthalic Anhydride, 98% (Titr.)
| 5466-84-2 |
|
(+)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone
| 67-64-1 |
|
2-Methoxy-1-naphthaldehyde, 99%
| 5392-12-1 |
|
Methyl-1-methyl-2-pyrrole acetate, 96%
| 51856-79-2 |
|
1-Ethoxy-2-propanol,90-95%,remainder 2-eth oxy-1-propanol
| 1569-02-4 |
|
m-Methoxycinnamic acid, 97%, predominantly trans
| 6099-04-3 |
|
Carbamylcholine Chloride, 99.0-101.0% (on the Dried Substance)
| 51-83-2 |
|
2-methanesulphonyl-2-acetyl pyridine
| |
|
2,5-Dimethylbenzoic Acid, 98%
| 610-72-0 |
|
6,7-Dimethoxy-3,4-Dihydroisoquinoline Hydrochloride, 99+%
| 20232-39-7 |
|
Tetramethylammonium Acetate, 95% (Titr.)
| 10581-12-1 |
|
(Chloromethylene)dimethylammonium chloride 96% (1h-nmr)
| 3724-43-4 |
|
o-Anisaldehyde, 98%
| 135-02-4 |
|
2,3-Dihydroxybenzaldehyde, 97%
| 24677-78-9 |
|
(S)-2-Amino-3-(Dimethylamino)propanoic Acid, Dihydrochloride,
| 0-00-1 |
|
Dimethylamine, 40 Wt% Solution in Water
| 124-40-3 |
|
n-(4-Vinylphenyl)maleimide
| 19007-91-1 |
|
2-Chloro-6-Fluorobenzoic Acid, 98%
| 434-75-3 |
|
1,2-Dicarboxy-Cis-4,5-Dihydroxycyclohexa- 2,6-Diene, 95%
| 130073-64-2 |
|
3-Nitrobenzyl bromide, 99%
| 3958-57-4 |
|
Potassium diphosphate, C.P.
| 7320-34-5 |
|
2-Bromothiophene, 98%
| 1003-09-4 |
|
2-Nonanone, 99+%
| 821-55-6 |
|
4-Methylesculetin
| 529-84-0 |
|
p-Toluic acid, 98%
| 99-94-5 |
|
Dilauryl Phosphite, Tech.
| 21302-90-9 |
|
Amberlite ir-120 na ion-exchange resin
| 9002-23-7 |
|
DL-Alpha-Hydroxycaproic Acid, 95+%
| 6064-63-7 |
|
tert-Butylhydroquinone diacetate
| 7507-48-4 |
|
2,5-Dimercapto-1,3,4-Thiadiazole, 98% (Titr.)
| 1072-71-5 |
|
n-Butyl disulfide, 98%
| 629-45-8 |
|
(R)-(-)-5-oxo-2-Tetrahydrofurancarboxylic acid, 99% (99% e.e.)
| 53558-93-3 |
|
Deuterium Bromide, 47 wt% Solution in D2O, 99+ Atom % D
| 7732-18-5 |
|
L-(-)-Pipecolinic Acid, 99%
| 3105-95-1 |
|
(S)-(+)-2-Amino-1-propanol, 98%
| 2749-11-3 |
|
Sodium formaldehydesulfoxylate dihydrate, 98%
| 6035-47-8 |
|
1-Chlorononane, 99%
| 2473-01-0 |
|
Allylamine, 97%
| 107-11-9 |
|
Triethyloxonium tetrafluoroborate, 1M solution in methylene chloride
| 75-09-2 |
|
N,N'-Dimethylethylenediamine
| 110-70-3 |
|
|