Search   
MSDS 
:
 (+)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone
CAS 
:
 67-64-1
SYNONYMS 
:
 (+)-Flec.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 67-64-1 |Acetone | 99.5 | 200-662-2 |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 107474-79-3 |(+)-1-(9-Fluorenyl)ethyl chloroformate| 0.5 | unlisted |
|----------------|--------------------------------------|----------|-----------|
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: F C
Risk Phrases: 11 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Causes burns.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract.
Symptoms may include: headache, excitement, fatigue, nausea,
vomiting, stupor, and coma. Causes gastrointestinal tract burns. May
cause liver and kidney damage. May cause central nervous system
depression, characterized by excitement, followed by headache,
dizziness, drowsiness, and nausea. Advanced stages may cause
collapse, unconsciousness, coma and possible death due to respiratory
failure. May cause perforation of the digestive tract. May cause
systemic effects.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. May cause liver and kidney damage. Causes chemical burns to
the respiratory tract. May cause motor incoordination and speech
abnormalities. Aspiration may lead to pulmonary edema. May cause
systemic effects.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic
inhalation may cause effects similar to those of acute inhalation.
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Containers can build up pressure if exposed to heat and/or fire. As
in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Use water spray to keep fire-exposed
containers cool. Extremely flammable liquid and vapor. Flammable
liquid and vapor. Vapors may be heavier than air. They can spread
along the ground and collect in low or confined areas. May be
ignited by heat, sparks, and flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water. Cool containers with flooding quantities of water until well
after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Wear
appropriate protective clothing to minimize contact with skin. Remove
all sources of ignition. Provide ventilation. A vapor suppressing
foam may be used to reduce vapors. Water spray may reduce vapor but
may not prevent ignition in closed spaces. Clean up residual material
by washing area with a 2-5% solution of soda ash.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Ground and
bond containers when transferring material. Avoid contact with eyes,
skin, and clothing. Do not breathe dust, vapor, mist, or gas. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Keep away from heat, sparks
and flame. Avoid ingestion and inhalation. Discard contaminated
shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Refrigerator/flammables.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 67-64-1:
United Kingdom, WEL - TWA: 500 ppm TWA; 1210 mg/m3 TWA
United Kingdom, WEL - STEL: 1500 ppm STEL; 3620 mg/m3 STEL
United States OSHA: 1000 ppm TWA; 2400 mg/m3 TWA
Belgium - TWA: 500 ppm VLE; 1210 mg/m3 VLE
Belgium - STEL: 1000 ppm VLE; 2420 mg/m3 VLE
France - VME: 750 ppm VME; 1800 mg/m3 VME
Germany: 500 ppm TWA; 1200 mg/m3 TWA
Japan: 200 ppm OEL; 470 mg/m3 OEL
Malaysia: 500 ppm TWA; 1187 mg/m3 TWA
Netherlands: 750 ppm MAC; 1780 mg/m3 MAC
Russia: 200 mg/m3 TWA
Spain: 500 ppm VLA-ED; 1210 mg/m3 VLA-ED
CAS# 105764-39-4:

CAS# 107474-79-3:

CAS# 118609-65-7:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless - colorless
Odor: sweetish odor, Musky
pH: 7
Vapor Pressure: 180 mm Hg
Viscosity: Not available
Boiling Point: 133.2 deg F
Freezing/Melting Point: -139.6 deg F
Autoignition Temperature: 869 deg F ( 465.00 deg C)
Flash Point: -19 deg C ( -2.20 deg F)
Explosion Limits, lower: 2.5
Explosion Limits, upper: 12.8
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: 0.79 (Water=1)
Molecular Formula: C3H6O
Molecular Weight: 58.0414

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources,
temperatures above 220C, strong oxidants.
Incompatibilities with Other Materials:
Acids (mineral, non-oxidizing, e.g. hydrochloric acid, hydrofluoric
acid, muriatic acid, phosphoric acid), acids (mineral, oxidizing,
e.g. chromic acid, hypochlorous acid, nitric acid, sulfuric acid),
acids (organic, e.g. acetic acid, benzoic acid, formic acid,
methanoic acid, oxalic acid), alcohols and glycols (e.g. butyl
alcohol, ethanol, methanol, ethylene glycol), aldehydes (e.g.
acetaldehyde, acrolein, chloral hydrate, formaldehyde), amides (e.g.
butyramide, diethyltoluamide, dimethyl formamide), amines (aliphatic
and aromatic, e.g. dimethyl amine, propylamine, pyridine,
triethylamine), azo, diazo, and hydrazines (e.g. dimethyl hydrazine,
hydrazine, methyl hydrazine), carbamates (e.g. carbanolate,
carbofuran), caustics (e.g. ammonia, ammonium hydroxide, calcium
hydroxide, potassium hydroxide, sodium hydroxide), cyanides (e.g.
potassium cyanide, sodium cyanide), dithiocarbamates (e.g. ferbam,
maneb, metham, thiram), esters (e.g. butyl acetate, ethyl acetate,
propyl formate), ethers.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, irritating and toxic
fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 67-64-1: AL3150000
CAS# 105764-39-4 unlisted.
CAS# 107474-79-3 unlisted.
CAS# 118609-65-7 unlisted.
LD50/LC50:
CAS# 67-64-1: Dermal, guinea pig: LD50 = >9400 uL/kg; Draize test,
rabbit, eye: 20 mg Severe; Draize test, rabbit, eye: 20 mg/24H
Moderate; Draize test, rabbit, eye: 10 uL Mild; Draize test, rabbit,
skin: 500 mg/24H Mild; Inhalation, mouse: LC50 = 44 gm/m3/4H;
Inhalation, rat: LC50 = 50100 mg/m3/8H; Oral, mouse: LD50 = 3 gm/kg;
Oral, rabbit: LD50 = 5340 mg/kg; Oral, rat: LD50 = 5800 mg/kg.
CAS# 105764-39-4.
CAS# 107474-79-3.
CAS# 118609-65-7.
Carcinogenicity:
Acetone -
Not listed by ACGIH, IARC, or NTP.
Deleted Registry Number replaced with 118609-65-7. -
Not listed by ACGIH, IARC, or NTP.
(+)-1-(9-Fluorenyl)ethyl chloroformate -
Not listed by ACGIH, IARC, or NTP.
1-(9-Fluorenyl)ethyl chloroformate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 3 (8)
UN Number: 2924
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Hazard Class: 3.1 (8)
UN Number: 2924
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2924
Packing group: II
USA RQ: CAS# 67-64-1: 5000 lb final RQ; 2270 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 67-64-1: 0
CAS# 105764-39-4: No information available.
CAS# 107474-79-3: No information available.
CAS# 118609-65-7: No information available.
Canada
CAS# 67-64-1 is listed on Canada's DSL List.
CAS# 67-64-1 is listed on Canada's Ingredient Disclosure List.
CAS# 105764-39-4 is not listed on Canada's Ingredient Disclosure List.
CAS# 107474-79-3 is not listed on Canada's Ingredient Disclosure List.
CAS# 118609-65-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 67-64-1 is listed on the TSCA inventory.
CAS# 105764-39-4 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 107474-79-3 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 118609-65-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 11 Highly flammable.
R 36 Irritating to eyes.
R 66 Repeated exposure may cause skin dryness or cracking.
R 67 Vapours may cause drowsiness and dizziness.
MSDS Creation Date: 9/02/1997 Revision #6 Date: 1/23/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Choline (Pract) (45% in Methanol) 62-49-7
2-Phenylpyridine, 98% 1008-89-5
Potassium Thioacetate, 98+% 10387-40-3
??-Propiolactone, 98% 57-57-8
Ethyl 3-iodobenzoate, 98% 58313-23-8
(+)-2,2,2-Trifluoro-1-(9-Anthryl)Ethanol, 98+% 60646-30-2
o-Acetotoluidide 120-66-1
2-Methylcyclohexanone, 98% 583-60-8
2,3-Dichlorobenzaldehyde,99% 6334-18-5
Iron Phthalocyanine, 96% (uv-vis) 132-16-1
4-Nitrophthalic Anhydride, 98% (Titr.) 5466-84-2
(+)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone 67-64-1
2-Methoxy-1-naphthaldehyde, 99% 5392-12-1
Methyl-1-methyl-2-pyrrole acetate, 96% 51856-79-2
1-Ethoxy-2-propanol,90-95%,remainder 2-eth oxy-1-propanol 1569-02-4
m-Methoxycinnamic acid, 97%, predominantly trans 6099-04-3
Carbamylcholine Chloride, 99.0-101.0% (on the Dried Substance) 51-83-2
2-methanesulphonyl-2-acetyl pyridine
2,5-Dimethylbenzoic Acid, 98% 610-72-0
6,7-Dimethoxy-3,4-Dihydroisoquinoline Hydrochloride, 99+% 20232-39-7
Tetramethylammonium Acetate, 95% (Titr.) 10581-12-1
(Chloromethylene)dimethylammonium chloride 96% (1h-nmr) 3724-43-4
o-Anisaldehyde, 98% 135-02-4
2,3-Dihydroxybenzaldehyde, 97% 24677-78-9
(S)-2-Amino-3-(Dimethylamino)propanoic Acid, Dihydrochloride, 0-00-1
Dimethylamine, 40 Wt% Solution in Water 124-40-3
n-(4-Vinylphenyl)maleimide 19007-91-1
2-Chloro-6-Fluorobenzoic Acid, 98% 434-75-3
1,2-Dicarboxy-Cis-4,5-Dihydroxycyclohexa- 2,6-Diene, 95% 130073-64-2
3-Nitrobenzyl bromide, 99% 3958-57-4
Potassium diphosphate, C.P. 7320-34-5
2-Bromothiophene, 98% 1003-09-4
2-Nonanone, 99+% 821-55-6
4-Methylesculetin 529-84-0
p-Toluic acid, 98% 99-94-5
Dilauryl Phosphite, Tech. 21302-90-9
Amberlite ir-120 na ion-exchange resin 9002-23-7
DL-Alpha-Hydroxycaproic Acid, 95+% 6064-63-7
tert-Butylhydroquinone diacetate 7507-48-4
2,5-Dimercapto-1,3,4-Thiadiazole, 98% (Titr.) 1072-71-5
n-Butyl disulfide, 98% 629-45-8
(R)-(-)-5-oxo-2-Tetrahydrofurancarboxylic acid, 99% (99% e.e.) 53558-93-3
Deuterium Bromide, 47 wt% Solution in D2O, 99+ Atom % D 7732-18-5
L-(-)-Pipecolinic Acid, 99% 3105-95-1
(S)-(+)-2-Amino-1-propanol, 98% 2749-11-3
Sodium formaldehydesulfoxylate dihydrate, 98% 6035-47-8
1-Chlorononane, 99% 2473-01-0
Allylamine, 97% 107-11-9
Triethyloxonium tetrafluoroborate, 1M solution in methylene chloride 75-09-2
N,N'-Dimethylethylenediamine 110-70-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net