Search   
MSDS 
:
 (S)-(+)-2-Amino-1-propanol, 98%
CAS 
:
 2749-11-3
SYNONYMS 
:
 L-Alanilol
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2749-11-3 |(S)-(+)-2-Amino-1-propanol | 98 | 220-388-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.Air sensitive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. May cause chemical conjunctivitis and corneal damage.
Skin:
May cause severe irritation and possible burns. May cause cyanosis
of the extremities. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. May cause systemic effects.
Inhalation at high concentrations may cause CNS depression and
asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.
Place under an inert atmosphere.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep container tightly closed. Keep away from
heat, sparks and flame. Do not get on skin or in eyes. Do not ingest
or inhale. Handle under an inert atmosphere. Store protected from
air. Discard contaminated shoes. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Corrosives area. Do not expose to air.
Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 2749-11-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Viscous liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 173-176.0 deg C @ 760.00 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 62 deg C ( 143.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: 0.9650g/cm3
Molecular Formula: C3H9NO
Molecular Weight: 75.11

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May discolor on
exposure to air.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to air, excess
heat.
Incompatibilities with Other Materials:
Air, oxidizing agents, acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2749-11-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(S)-(+)-2-Amino-1-propanol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 2749-11-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2749-11-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2749-11-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/28/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Choline (Pract) (45% in Methanol) 62-49-7
2-Phenylpyridine, 98% 1008-89-5
Potassium Thioacetate, 98+% 10387-40-3
??-Propiolactone, 98% 57-57-8
Ethyl 3-iodobenzoate, 98% 58313-23-8
(+)-2,2,2-Trifluoro-1-(9-Anthryl)Ethanol, 98+% 60646-30-2
o-Acetotoluidide 120-66-1
2-Methylcyclohexanone, 98% 583-60-8
2,3-Dichlorobenzaldehyde,99% 6334-18-5
Iron Phthalocyanine, 96% (uv-vis) 132-16-1
4-Nitrophthalic Anhydride, 98% (Titr.) 5466-84-2
(+)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone 67-64-1
2-Methoxy-1-naphthaldehyde, 99% 5392-12-1
Methyl-1-methyl-2-pyrrole acetate, 96% 51856-79-2
1-Ethoxy-2-propanol,90-95%,remainder 2-eth oxy-1-propanol 1569-02-4
m-Methoxycinnamic acid, 97%, predominantly trans 6099-04-3
Carbamylcholine Chloride, 99.0-101.0% (on the Dried Substance) 51-83-2
2-methanesulphonyl-2-acetyl pyridine
2,5-Dimethylbenzoic Acid, 98% 610-72-0
6,7-Dimethoxy-3,4-Dihydroisoquinoline Hydrochloride, 99+% 20232-39-7
Tetramethylammonium Acetate, 95% (Titr.) 10581-12-1
(Chloromethylene)dimethylammonium chloride 96% (1h-nmr) 3724-43-4
o-Anisaldehyde, 98% 135-02-4
2,3-Dihydroxybenzaldehyde, 97% 24677-78-9
(S)-2-Amino-3-(Dimethylamino)propanoic Acid, Dihydrochloride, 0-00-1
Dimethylamine, 40 Wt% Solution in Water 124-40-3
n-(4-Vinylphenyl)maleimide 19007-91-1
2-Chloro-6-Fluorobenzoic Acid, 98% 434-75-3
1,2-Dicarboxy-Cis-4,5-Dihydroxycyclohexa- 2,6-Diene, 95% 130073-64-2
3-Nitrobenzyl bromide, 99% 3958-57-4
Potassium diphosphate, C.P. 7320-34-5
2-Bromothiophene, 98% 1003-09-4
2-Nonanone, 99+% 821-55-6
4-Methylesculetin 529-84-0
p-Toluic acid, 98% 99-94-5
Dilauryl Phosphite, Tech. 21302-90-9
Amberlite ir-120 na ion-exchange resin 9002-23-7
DL-Alpha-Hydroxycaproic Acid, 95+% 6064-63-7
tert-Butylhydroquinone diacetate 7507-48-4
2,5-Dimercapto-1,3,4-Thiadiazole, 98% (Titr.) 1072-71-5
n-Butyl disulfide, 98% 629-45-8
(R)-(-)-5-oxo-2-Tetrahydrofurancarboxylic acid, 99% (99% e.e.) 53558-93-3
Deuterium Bromide, 47 wt% Solution in D2O, 99+ Atom % D 7732-18-5
L-(-)-Pipecolinic Acid, 99% 3105-95-1
(S)-(+)-2-Amino-1-propanol, 98% 2749-11-3
Sodium formaldehydesulfoxylate dihydrate, 98% 6035-47-8
1-Chlorononane, 99% 2473-01-0
Allylamine, 97% 107-11-9
Triethyloxonium tetrafluoroborate, 1M solution in methylene chloride 75-09-2
N,N'-Dimethylethylenediamine 110-70-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net