**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1118-58-7 |2-Methyl-1,3-pentadiene, cis/trans mix| 99 | 214-264-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin irritation. May cause dermatitis. May cause cyanosis of
the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May
cause burning sensation in the chest.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Extremely flammable
liquid and vapor. Containers may explode in the heat of a fire.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Will be easily ignited by heat,
sparks or flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. This material is lighter than water and insoluble in
water. The fire could easily be spread by the use of water in an
area where the water cannot be contained. Do NOT use straight streams
of water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation. A vapor suppressing foam
may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Remove contaminated clothing and wash before reuse. Use only in a
well-ventilated area. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Refrigerator/flammables.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 1118-58-7:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear slightly yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 73.0 - 75.0 deg C @ 760 mmHg
Freezing/Melting Point: -15 deg C
Autoignition Temperature: Not applicable.
Flash Point: -18 deg C ( -0.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: insoluble
Specific Gravity/Density: .7220g/cm3
Molecular Formula: C6H10
Molecular Weight: 82.15
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1118-58-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Methyl-1,3-pentadiene, cis/trans mixture(30/70) -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: METHYLPENTADIENE
Hazard Class: 3
UN Number: 2461
Packing Group: II
IMO
Shipping Name: METHYLPENTADIENE
Hazard Class: 3.1
UN Number: 2461
Packing Group: II
RID/ADR
Shipping Name: METHYLPENTADIENES
Hazard Class: 3
UN Number: 2461
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 7/9 Keep container tightly closed and in a
well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
WGK (Water Danger/Protection)
CAS# 1118-58-7: No information available.
Canada
CAS# 1118-58-7 is listed on Canada's DSL List.
CAS# 1118-58-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1118-58-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
8-Anilino-1-naphthalenesulfonic acid magnesium salt, 95% (uv-vis)
| 18108-68-4 |
|
Nonadecanoic acid, 99%
| 646-30-0 |
|
Hydrocinnamic Acid, 99+% (GC)
| 501-52-0 |
|
N-Methyldioctylamine, 98%
| 4455-26-9 |
|
n-Pentadecanoic acid, 99%
| 1002-84-2 |
|
Cesium hydroxide
| 21351-79-1 |
|
Triphenylmethyl mercaptan
| 3695-77-0 |
|
2,3,3',4'-Tetramethoxybenzophenone, 98%
| 50625-53-1 |
|
2,3,4-Trimethoxybenzaldehyde, 99%
| 2103-57-3 |
|
Dichloromalononitrile, 97%
| 13063-43-9 |
|
n-(5-Anilino-2,4-pentadienylidene)aniline hydrochloride, 98% (hplc)
| 1497-49-0 |
|
2,6-Dichlorobenzoic Acid, 98+%
| 50-30-6 |
|
3-Benzyloxy-4-Methoxybenzaldehyde, 98%
| 6346-05-0 |
|
2-Chloro-6-Fluorophenylacetonitrile, 98%
| 75279-55-9 |
|
3-Pyridinealdoxime, 98%
| 1193-92-6 |
|
Dibenzoylmethane, 98%
| 120-46-7 |
|
Lead telluride, 99.99%
| 1314-91-6 |
|
Benzoxazole, 99+%
| 273-53-0 |
|
DL-Asparagine Monohydrate, 98%
| 3130-87-8 |
|
2-Aminoresorcinol Hydrochloride, 97% (Titr.)
| 634-60-6 |
|
Sesame Oil
| 8008-74-0 |
|
N-1-(6-Indazolyl)-Sulfanilamide
| 13734-41-3 |
|
3-(4-Methoxyphenyl)-propionic acid, 98%
| 1929-29-9 |
|
1-Phenylnonane, 97%
| 1081-77-2 |
|
3,5-Dichloroanthranilic Acid, 97%
| 2789-92-6 |
|
N-(Tert-Butyl)Benzylamine, 99%
| 3378-72-1 |
|
2'-Bromoacetophenone, 98+%
| 2142-69-0 |
|
Chlorotrimethylsilane, 98%
| 75-77-4 |
|
Linalyl acetate,synthetic, 95-97%(gc)
| 115-95-7 |
|
5,7-Dibromo-8-hydroxyquinoline, 96%
| 521-74-4 |
|
Molecular Sieves, 5A, 4 to 8 Mesh
| 0-00-1 |
|
4-Chloro-3-Nitrobenzaldehyde, 97%
| 16588-34-4 |
|
2-Amino-5-Chlorobenzotrifluoride, 97%
| 445-03-4 |
|
Phosphorus Trichloride, 99% (Titr.)
| 7719-12-2 |
|
2-Methyl-1,3-pentadiene (cis/trans mixture 30/70),99%
| 1118-58-7 |
|
4-Bromo-3-Methylaniline, 99%
| 6933-10-4 |
|
Adipic Acid Monoethyl Ester, 98%
| 626-86-8 |
|
2-Guanidinobenzimidazole, 95%
| 5418-95-1 |
|
Diisobutyl phthalate, 99+% (GC)
| 84-69-5 |
|
Vinylacetic Acid, Tech., 90% Unstabilized
| 625-38-7 |
|
4-Propylbenzoyl Chloride, 99+% (Titr.)
| 52710-27-7 |
|
Hexanoic anhydride, 99%
| 2051-49-2 |
|
2-Hydroxy-6-methylpyridine-3-carboxylic acid, 98%
| 38116-61-9 |
|
5-Benzyloxygramine 99+%
| 1453-97-0 |
|
Ethyl 2-Methylacetoacetate, 98%
| 609-14-3 |
|
2-Fluoro-4-iodotoluene, 99+%
| 39998-81-7 |
|
Tris-(2-Methylallyl)-Amine, 99%
| 6321-40-0 |
|
Hydroxypivalyl hydroxypivalate
| 1115-20-4 |
|
DL-alpha-pinene, 97%
| 2437-95-8 |
|
FMOC-Glycine, 98%
| 29022-11-5 |
|
|