Search   
MSDS 
:
 2-Amino-5-Chlorobenzotrifluoride, 97%
CAS 
:
 445-03-4
SYNONYMS 
:
 4-Chloro-2-(Trifluoromethyl)Aniline.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 445-03-4 |Benzenamine, 4-Chloro-2-(Trifluorometh| 97 | 207-151-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36/37/38 41

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and
skin. Risk of serious damage to eyes.

Potential Health Effects
Eye:
Causes eye irritation. May cause redness, pain, blurred vision and
possible eye damage. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Methemoglobinemia is characterized by dizziness,
drowsiness, headache, shortness of breath, cyanosis (bluish
discoloration of skin due to deficient oxygenation of the blood),
rapid heart rate and chocolate-brown colored blood. Overexposure may
cause methemoglobinemia. Ingestion of large amounts of fluoride may
cause salivation, nausea, vomiting, abdominal pain, fever, labored
breathing. Exposure to fluoride compounds can result in systemic
toxic effects on the heart, liver, and kidneys. It may also deplete
calcium levels in the body leading to hypocalcemia and death.
Fluoride can reduce calcium levels leading to fatal hypocalcemia.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Methemoglobinemia is characterized by dizziness,
drowsiness, headache, shortness of breath, cyanosis (bluish
discoloration of skin due to deficient oxygenation of the blood),
rapid heart rate and chocolate-brown blood. Can produce delayed
pulmonary edema. Inhalation of aniline causes anoxia due to the
formation of methemoglobin. Inhalation at high concentrations may
cause CNS depression and asphixiation.
Chronic:
Chronic inhalation and ingestion may cause chronic fluoride
poisoning (fluorosis) characterized by weight loss, weakness,
anemia, brittle bones, and stiff joints. May cause
methemoglobinemia, which is characterized by chocolate-brown colored
blood, headache, weakness, dizziness, breath shortness, cyanosis
(bluish skin due to deficient oxygenation of blood), rapid heart
rate, unconsciousness and possible death. Effects may be delayed.
Chronic exposure to fluoride compounds may cause systemic toxicity.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively. For methemoglobinemia,
administer oxygen alone or with Methylene Blue depending on the
methemoglobin concentration in the blood.
Antidote:
Methylene blue, alone or in combination with oxygen is indicated as
a treatment in nitrite induced methemoglobinemia.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Wash clothing before reuse. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 445-03-4:
United States OSHA: 2.5 mg/m3 TWA (as F) (listed under Fluorides

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: fish-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 66 - 67 deg C @ 3.00mm Hg
Freezing/Melting Point: 8.8 deg C
Autoignition Temperature: > 500 deg C (> 932.00 deg F)
Flash Point: 77 deg C ( 170.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.3860g/cm3
Molecular Formula: C7H5ClF3N
Molecular Weight: 195.57

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Acids, oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 445-03-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzenamine, 4-Chloro-2-(Trifluoromethyl)- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 41 Risk of serious damage to eyes.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 28 After contact with skin, wash immediately
with...
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 445-03-4: No information available.
Canada
CAS# 445-03-4 is listed on Canada's NDSL List.
CAS# 445-03-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 445-03-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
8-Anilino-1-naphthalenesulfonic acid magnesium salt, 95% (uv-vis) 18108-68-4
Nonadecanoic acid, 99% 646-30-0
Hydrocinnamic Acid, 99+% (GC) 501-52-0
N-Methyldioctylamine, 98% 4455-26-9
n-Pentadecanoic acid, 99% 1002-84-2
Cesium hydroxide 21351-79-1
Triphenylmethyl mercaptan 3695-77-0
2,3,3',4'-Tetramethoxybenzophenone, 98% 50625-53-1
2,3,4-Trimethoxybenzaldehyde, 99% 2103-57-3
Dichloromalononitrile, 97% 13063-43-9
n-(5-Anilino-2,4-pentadienylidene)aniline hydrochloride, 98% (hplc) 1497-49-0
2,6-Dichlorobenzoic Acid, 98+% 50-30-6
3-Benzyloxy-4-Methoxybenzaldehyde, 98% 6346-05-0
2-Chloro-6-Fluorophenylacetonitrile, 98% 75279-55-9
3-Pyridinealdoxime, 98% 1193-92-6
Dibenzoylmethane, 98% 120-46-7
Lead telluride, 99.99% 1314-91-6
Benzoxazole, 99+% 273-53-0
DL-Asparagine Monohydrate, 98% 3130-87-8
2-Aminoresorcinol Hydrochloride, 97% (Titr.) 634-60-6
Sesame Oil 8008-74-0
N-1-(6-Indazolyl)-Sulfanilamide 13734-41-3
3-(4-Methoxyphenyl)-propionic acid, 98% 1929-29-9
1-Phenylnonane, 97% 1081-77-2
3,5-Dichloroanthranilic Acid, 97% 2789-92-6
N-(Tert-Butyl)Benzylamine, 99% 3378-72-1
2'-Bromoacetophenone, 98+% 2142-69-0
Chlorotrimethylsilane, 98% 75-77-4
Linalyl acetate,synthetic, 95-97%(gc) 115-95-7
5,7-Dibromo-8-hydroxyquinoline, 96% 521-74-4
Molecular Sieves, 5A, 4 to 8 Mesh 0-00-1
4-Chloro-3-Nitrobenzaldehyde, 97% 16588-34-4
2-Amino-5-Chlorobenzotrifluoride, 97% 445-03-4
Phosphorus Trichloride, 99% (Titr.) 7719-12-2
2-Methyl-1,3-pentadiene (cis/trans mixture 30/70),99% 1118-58-7
4-Bromo-3-Methylaniline, 99% 6933-10-4
Adipic Acid Monoethyl Ester, 98% 626-86-8
2-Guanidinobenzimidazole, 95% 5418-95-1
Diisobutyl phthalate, 99+% (GC) 84-69-5
Vinylacetic Acid, Tech., 90% Unstabilized 625-38-7
4-Propylbenzoyl Chloride, 99+% (Titr.) 52710-27-7
Hexanoic anhydride, 99% 2051-49-2
2-Hydroxy-6-methylpyridine-3-carboxylic acid, 98% 38116-61-9
5-Benzyloxygramine 99+% 1453-97-0
Ethyl 2-Methylacetoacetate, 98% 609-14-3
2-Fluoro-4-iodotoluene, 99+% 39998-81-7
Tris-(2-Methylallyl)-Amine, 99% 6321-40-0
Hydroxypivalyl hydroxypivalate 1115-20-4
DL-alpha-pinene, 97% 2437-95-8
FMOC-Glycine, 98% 29022-11-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net