Search   
MSDS 
:
 8-Anilino-1-naphthalenesulfonic acid  magnesium salt, 95% (uv-vis)
CAS 
:
 18108-68-4
SYNONYMS 
:
 1,8-ANS magnesium salt
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 18108-68-4 |8-Anilino-1-naphthalenesulfonic acid m| 95% | 242-004-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.Light
sensitive.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with skin and eyes. Avoid ingestion and inhalation. Use only
in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 18108-68-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C32H24MgN2O6S2
Molecular Weight: 620.98

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, exposure to air, exposure to moist air
or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon
dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 18108-68-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
8-Anilino-1-naphthalenesulfonic acid magnesium salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 18108-68-4: No information available.
Canada
CAS# 18108-68-4 is listed on Canada's DSL List.
CAS# 18108-68-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 18108-68-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
8-Anilino-1-naphthalenesulfonic acid magnesium salt, 95% (uv-vis) 18108-68-4
Nonadecanoic acid, 99% 646-30-0
Hydrocinnamic Acid, 99+% (GC) 501-52-0
N-Methyldioctylamine, 98% 4455-26-9
n-Pentadecanoic acid, 99% 1002-84-2
Cesium hydroxide 21351-79-1
Triphenylmethyl mercaptan 3695-77-0
2,3,3',4'-Tetramethoxybenzophenone, 98% 50625-53-1
2,3,4-Trimethoxybenzaldehyde, 99% 2103-57-3
Dichloromalononitrile, 97% 13063-43-9
n-(5-Anilino-2,4-pentadienylidene)aniline hydrochloride, 98% (hplc) 1497-49-0
2,6-Dichlorobenzoic Acid, 98+% 50-30-6
3-Benzyloxy-4-Methoxybenzaldehyde, 98% 6346-05-0
2-Chloro-6-Fluorophenylacetonitrile, 98% 75279-55-9
3-Pyridinealdoxime, 98% 1193-92-6
Dibenzoylmethane, 98% 120-46-7
Lead telluride, 99.99% 1314-91-6
Benzoxazole, 99+% 273-53-0
DL-Asparagine Monohydrate, 98% 3130-87-8
2-Aminoresorcinol Hydrochloride, 97% (Titr.) 634-60-6
Sesame Oil 8008-74-0
N-1-(6-Indazolyl)-Sulfanilamide 13734-41-3
3-(4-Methoxyphenyl)-propionic acid, 98% 1929-29-9
1-Phenylnonane, 97% 1081-77-2
3,5-Dichloroanthranilic Acid, 97% 2789-92-6
N-(Tert-Butyl)Benzylamine, 99% 3378-72-1
2'-Bromoacetophenone, 98+% 2142-69-0
Chlorotrimethylsilane, 98% 75-77-4
Linalyl acetate,synthetic, 95-97%(gc) 115-95-7
5,7-Dibromo-8-hydroxyquinoline, 96% 521-74-4
Molecular Sieves, 5A, 4 to 8 Mesh 0-00-1
4-Chloro-3-Nitrobenzaldehyde, 97% 16588-34-4
2-Amino-5-Chlorobenzotrifluoride, 97% 445-03-4
Phosphorus Trichloride, 99% (Titr.) 7719-12-2
2-Methyl-1,3-pentadiene (cis/trans mixture 30/70),99% 1118-58-7
4-Bromo-3-Methylaniline, 99% 6933-10-4
Adipic Acid Monoethyl Ester, 98% 626-86-8
2-Guanidinobenzimidazole, 95% 5418-95-1
Diisobutyl phthalate, 99+% (GC) 84-69-5
Vinylacetic Acid, Tech., 90% Unstabilized 625-38-7
4-Propylbenzoyl Chloride, 99+% (Titr.) 52710-27-7
Hexanoic anhydride, 99% 2051-49-2
2-Hydroxy-6-methylpyridine-3-carboxylic acid, 98% 38116-61-9
5-Benzyloxygramine 99+% 1453-97-0
Ethyl 2-Methylacetoacetate, 98% 609-14-3
2-Fluoro-4-iodotoluene, 99+% 39998-81-7
Tris-(2-Methylallyl)-Amine, 99% 6321-40-0
Hydroxypivalyl hydroxypivalate 1115-20-4
DL-alpha-pinene, 97% 2437-95-8
FMOC-Glycine, 98% 29022-11-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net