Search   
MSDS 
:
 Ethyl 2-Methylacetoacetate, 98%
CAS 
:
 609-14-3
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 609-14-3 |Ethyl 2-Methylacetoacetate | 98 | 210-179-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Inhalation at high concentrations may cause
CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Combustible liquid. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined
areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use agent most
appropriate to extinguish fire. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 609-14-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless to light yellow
Odor: acetic odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 187 deg C @ 760.00mm Hg
Freezing/Melting Point: -45 deg C
Autoignition Temperature: Not available.
Flash Point: 62 deg C ( 143.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible with most organic solvents
Specific Gravity/Density: 1.0190g/cm3
Molecular Formula: C7H12O3
Molecular Weight: 144.0822

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 609-14-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Ethyl 2-Methylacetoacetate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 609-14-3: 1
Canada
CAS# 609-14-3 is listed on Canada's NDSL List.
CAS# 609-14-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 609-14-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
8-Anilino-1-naphthalenesulfonic acid magnesium salt, 95% (uv-vis) 18108-68-4
Nonadecanoic acid, 99% 646-30-0
Hydrocinnamic Acid, 99+% (GC) 501-52-0
N-Methyldioctylamine, 98% 4455-26-9
n-Pentadecanoic acid, 99% 1002-84-2
Cesium hydroxide 21351-79-1
Triphenylmethyl mercaptan 3695-77-0
2,3,3',4'-Tetramethoxybenzophenone, 98% 50625-53-1
2,3,4-Trimethoxybenzaldehyde, 99% 2103-57-3
Dichloromalononitrile, 97% 13063-43-9
n-(5-Anilino-2,4-pentadienylidene)aniline hydrochloride, 98% (hplc) 1497-49-0
2,6-Dichlorobenzoic Acid, 98+% 50-30-6
3-Benzyloxy-4-Methoxybenzaldehyde, 98% 6346-05-0
2-Chloro-6-Fluorophenylacetonitrile, 98% 75279-55-9
3-Pyridinealdoxime, 98% 1193-92-6
Dibenzoylmethane, 98% 120-46-7
Lead telluride, 99.99% 1314-91-6
Benzoxazole, 99+% 273-53-0
DL-Asparagine Monohydrate, 98% 3130-87-8
2-Aminoresorcinol Hydrochloride, 97% (Titr.) 634-60-6
Sesame Oil 8008-74-0
N-1-(6-Indazolyl)-Sulfanilamide 13734-41-3
3-(4-Methoxyphenyl)-propionic acid, 98% 1929-29-9
1-Phenylnonane, 97% 1081-77-2
3,5-Dichloroanthranilic Acid, 97% 2789-92-6
N-(Tert-Butyl)Benzylamine, 99% 3378-72-1
2'-Bromoacetophenone, 98+% 2142-69-0
Chlorotrimethylsilane, 98% 75-77-4
Linalyl acetate,synthetic, 95-97%(gc) 115-95-7
5,7-Dibromo-8-hydroxyquinoline, 96% 521-74-4
Molecular Sieves, 5A, 4 to 8 Mesh 0-00-1
4-Chloro-3-Nitrobenzaldehyde, 97% 16588-34-4
2-Amino-5-Chlorobenzotrifluoride, 97% 445-03-4
Phosphorus Trichloride, 99% (Titr.) 7719-12-2
2-Methyl-1,3-pentadiene (cis/trans mixture 30/70),99% 1118-58-7
4-Bromo-3-Methylaniline, 99% 6933-10-4
Adipic Acid Monoethyl Ester, 98% 626-86-8
2-Guanidinobenzimidazole, 95% 5418-95-1
Diisobutyl phthalate, 99+% (GC) 84-69-5
Vinylacetic Acid, Tech., 90% Unstabilized 625-38-7
4-Propylbenzoyl Chloride, 99+% (Titr.) 52710-27-7
Hexanoic anhydride, 99% 2051-49-2
2-Hydroxy-6-methylpyridine-3-carboxylic acid, 98% 38116-61-9
5-Benzyloxygramine 99+% 1453-97-0
Ethyl 2-Methylacetoacetate, 98% 609-14-3
2-Fluoro-4-iodotoluene, 99+% 39998-81-7
Tris-(2-Methylallyl)-Amine, 99% 6321-40-0
Hydroxypivalyl hydroxypivalate 1115-20-4
DL-alpha-pinene, 97% 2437-95-8
FMOC-Glycine, 98% 29022-11-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net