**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1497-49-0 |N-(5-Anilino-2,4-pentadienylidene)anil| 98 | 216-094-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T N
Risk Phrases: 20/21/22 40 50 48/23/24/25
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Limited evidence of a carcinogenic effect. Very toxic to aquatic
organisms. Toxic : danger of serious damage to health by prolonged
exposure through inhalation, contact with skin and if
swallowed.Hygroscopic (absorbs moisture from the air).The
toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes mild skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May
cause central nervous system effects.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1497-49-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: red-brown
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 173-175C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C17H16N2.HCl
Molecular Weight: 284.78
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1497-49-0 unlisted.
LD50/LC50:
Not available.
Oral, rat: LD50 = 2262
Carcinogenicity:
N-(5-Anilino-2,4-pentadienylidene)anilinehydrochloride -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T N
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 40 Limited evidence of a carcinogenic effect.
R 48/23/24/25 Toxic : danger of serious damage to
health by prolonged exposure through inhalation,
contact with skin and if swallowed.
R 50 Very toxic to aquatic organisms.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 1497-49-0: No information available.
Canada
CAS# 1497-49-0 is listed on Canada's NDSL List.
CAS# 1497-49-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1497-49-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/14/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
8-Anilino-1-naphthalenesulfonic acid magnesium salt, 95% (uv-vis)
| 18108-68-4 |
|
Nonadecanoic acid, 99%
| 646-30-0 |
|
Hydrocinnamic Acid, 99+% (GC)
| 501-52-0 |
|
N-Methyldioctylamine, 98%
| 4455-26-9 |
|
n-Pentadecanoic acid, 99%
| 1002-84-2 |
|
Cesium hydroxide
| 21351-79-1 |
|
Triphenylmethyl mercaptan
| 3695-77-0 |
|
2,3,3',4'-Tetramethoxybenzophenone, 98%
| 50625-53-1 |
|
2,3,4-Trimethoxybenzaldehyde, 99%
| 2103-57-3 |
|
Dichloromalononitrile, 97%
| 13063-43-9 |
|
n-(5-Anilino-2,4-pentadienylidene)aniline hydrochloride, 98% (hplc)
| 1497-49-0 |
|
2,6-Dichlorobenzoic Acid, 98+%
| 50-30-6 |
|
3-Benzyloxy-4-Methoxybenzaldehyde, 98%
| 6346-05-0 |
|
2-Chloro-6-Fluorophenylacetonitrile, 98%
| 75279-55-9 |
|
3-Pyridinealdoxime, 98%
| 1193-92-6 |
|
Dibenzoylmethane, 98%
| 120-46-7 |
|
Lead telluride, 99.99%
| 1314-91-6 |
|
Benzoxazole, 99+%
| 273-53-0 |
|
DL-Asparagine Monohydrate, 98%
| 3130-87-8 |
|
2-Aminoresorcinol Hydrochloride, 97% (Titr.)
| 634-60-6 |
|
Sesame Oil
| 8008-74-0 |
|
N-1-(6-Indazolyl)-Sulfanilamide
| 13734-41-3 |
|
3-(4-Methoxyphenyl)-propionic acid, 98%
| 1929-29-9 |
|
1-Phenylnonane, 97%
| 1081-77-2 |
|
3,5-Dichloroanthranilic Acid, 97%
| 2789-92-6 |
|
N-(Tert-Butyl)Benzylamine, 99%
| 3378-72-1 |
|
2'-Bromoacetophenone, 98+%
| 2142-69-0 |
|
Chlorotrimethylsilane, 98%
| 75-77-4 |
|
Linalyl acetate,synthetic, 95-97%(gc)
| 115-95-7 |
|
5,7-Dibromo-8-hydroxyquinoline, 96%
| 521-74-4 |
|
Molecular Sieves, 5A, 4 to 8 Mesh
| 0-00-1 |
|
4-Chloro-3-Nitrobenzaldehyde, 97%
| 16588-34-4 |
|
2-Amino-5-Chlorobenzotrifluoride, 97%
| 445-03-4 |
|
Phosphorus Trichloride, 99% (Titr.)
| 7719-12-2 |
|
2-Methyl-1,3-pentadiene (cis/trans mixture 30/70),99%
| 1118-58-7 |
|
4-Bromo-3-Methylaniline, 99%
| 6933-10-4 |
|
Adipic Acid Monoethyl Ester, 98%
| 626-86-8 |
|
2-Guanidinobenzimidazole, 95%
| 5418-95-1 |
|
Diisobutyl phthalate, 99+% (GC)
| 84-69-5 |
|
Vinylacetic Acid, Tech., 90% Unstabilized
| 625-38-7 |
|
4-Propylbenzoyl Chloride, 99+% (Titr.)
| 52710-27-7 |
|
Hexanoic anhydride, 99%
| 2051-49-2 |
|
2-Hydroxy-6-methylpyridine-3-carboxylic acid, 98%
| 38116-61-9 |
|
5-Benzyloxygramine 99+%
| 1453-97-0 |
|
Ethyl 2-Methylacetoacetate, 98%
| 609-14-3 |
|
2-Fluoro-4-iodotoluene, 99+%
| 39998-81-7 |
|
Tris-(2-Methylallyl)-Amine, 99%
| 6321-40-0 |
|
Hydroxypivalyl hydroxypivalate
| 1115-20-4 |
|
DL-alpha-pinene, 97%
| 2437-95-8 |
|
FMOC-Glycine, 98%
| 29022-11-5 |
|
|