Search   
MSDS 
:
 Sesame Oil
CAS 
:
 8008-74-0
SYNONYMS 
:
 Gingilli Oil; Sextra.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 8008-74-0 |Sesame Oil | ca 100 | 232-370-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Contact may cause transient eye irritation.
Skin:
May cause skin irritation. Low hazard for usual industrial handling.
Ingestion:
May cause irritation of the digestive tract. Low hazard for usual
industrial handling.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Do NOT induce
vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls
of milk or water. Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. Water may spread fire.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Absorb spill using
an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as sawdust.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 8008-74-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: pale-yellow
Odor: practically odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 21 deg F
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water
Specific Gravity/Density: 0.916-0.92
Molecular Formula: Aliphatic hydrocarbon
Molecular Weight: Not available

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 8008-74-0: VU3940000
LD50/LC50:
CAS# 8008-74-0: Skin, rabbit: LD50 = >2 gm/kg.
Not available.
Carcinogenicity:
Sesame Oil -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 8008-74-0: No information available.
Canada
CAS# 8008-74-0 is listed on Canada's DSL List.
CAS# 8008-74-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 8008-74-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
8-Anilino-1-naphthalenesulfonic acid magnesium salt, 95% (uv-vis) 18108-68-4
Nonadecanoic acid, 99% 646-30-0
Hydrocinnamic Acid, 99+% (GC) 501-52-0
N-Methyldioctylamine, 98% 4455-26-9
n-Pentadecanoic acid, 99% 1002-84-2
Cesium hydroxide 21351-79-1
Triphenylmethyl mercaptan 3695-77-0
2,3,3',4'-Tetramethoxybenzophenone, 98% 50625-53-1
2,3,4-Trimethoxybenzaldehyde, 99% 2103-57-3
Dichloromalononitrile, 97% 13063-43-9
n-(5-Anilino-2,4-pentadienylidene)aniline hydrochloride, 98% (hplc) 1497-49-0
2,6-Dichlorobenzoic Acid, 98+% 50-30-6
3-Benzyloxy-4-Methoxybenzaldehyde, 98% 6346-05-0
2-Chloro-6-Fluorophenylacetonitrile, 98% 75279-55-9
3-Pyridinealdoxime, 98% 1193-92-6
Dibenzoylmethane, 98% 120-46-7
Lead telluride, 99.99% 1314-91-6
Benzoxazole, 99+% 273-53-0
DL-Asparagine Monohydrate, 98% 3130-87-8
2-Aminoresorcinol Hydrochloride, 97% (Titr.) 634-60-6
Sesame Oil 8008-74-0
N-1-(6-Indazolyl)-Sulfanilamide 13734-41-3
3-(4-Methoxyphenyl)-propionic acid, 98% 1929-29-9
1-Phenylnonane, 97% 1081-77-2
3,5-Dichloroanthranilic Acid, 97% 2789-92-6
N-(Tert-Butyl)Benzylamine, 99% 3378-72-1
2'-Bromoacetophenone, 98+% 2142-69-0
Chlorotrimethylsilane, 98% 75-77-4
Linalyl acetate,synthetic, 95-97%(gc) 115-95-7
5,7-Dibromo-8-hydroxyquinoline, 96% 521-74-4
Molecular Sieves, 5A, 4 to 8 Mesh 0-00-1
4-Chloro-3-Nitrobenzaldehyde, 97% 16588-34-4
2-Amino-5-Chlorobenzotrifluoride, 97% 445-03-4
Phosphorus Trichloride, 99% (Titr.) 7719-12-2
2-Methyl-1,3-pentadiene (cis/trans mixture 30/70),99% 1118-58-7
4-Bromo-3-Methylaniline, 99% 6933-10-4
Adipic Acid Monoethyl Ester, 98% 626-86-8
2-Guanidinobenzimidazole, 95% 5418-95-1
Diisobutyl phthalate, 99+% (GC) 84-69-5
Vinylacetic Acid, Tech., 90% Unstabilized 625-38-7
4-Propylbenzoyl Chloride, 99+% (Titr.) 52710-27-7
Hexanoic anhydride, 99% 2051-49-2
2-Hydroxy-6-methylpyridine-3-carboxylic acid, 98% 38116-61-9
5-Benzyloxygramine 99+% 1453-97-0
Ethyl 2-Methylacetoacetate, 98% 609-14-3
2-Fluoro-4-iodotoluene, 99+% 39998-81-7
Tris-(2-Methylallyl)-Amine, 99% 6321-40-0
Hydroxypivalyl hydroxypivalate 1115-20-4
DL-alpha-pinene, 97% 2437-95-8
FMOC-Glycine, 98% 29022-11-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net