**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 273-53-0 |Benzoxazole | 99.0+ | 205-988-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable.The toxicological properties of this material have not
been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Ingestion of large amounts may cause CNS
depression.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Vapors may cause dizziness or suffocation.
May cause burning sensation in the chest.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse. Remove contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Get medical aid immediately. Do NOT induce vomiting. If
conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or
water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable solid.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Use agent most appropriate to
extinguish fire. Do NOT use straight streams of water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Remove all sources of ignition. Use a spark-proof
tool. Provide ventilation. A vapor suppressing foam may be used to
reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Keep refrigerated. (Store below 4C/39F.)
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 273-53-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: yellow orange
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 182 deg C @ 760.00mm Hg
Freezing/Melting Point: 27 - 30 deg C
Autoignition Temperature: Not available.
Flash Point: 58 deg C ( 136.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C7H5NO
Molecular Weight: 119.12
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 273-53-0: DM4375000
LD50/LC50:
CAS# 273-53-0: Oral, mouse: LD50 = 750 mg/kg.
Carcinogenicity:
Benzoxazole -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.*
Hazard Class: 4.1
UN Number: 1325
Packing Group: III
IMO
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.
Hazard Class: 4.1
UN Number: 1325
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.
Hazard Class: 4.1
UN Number: 1325
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 273-53-0: No information available.
Canada
CAS# 273-53-0 is listed on Canada's NDSL List.
CAS# 273-53-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 273-53-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
8-Anilino-1-naphthalenesulfonic acid magnesium salt, 95% (uv-vis)
| 18108-68-4 |
|
Nonadecanoic acid, 99%
| 646-30-0 |
|
Hydrocinnamic Acid, 99+% (GC)
| 501-52-0 |
|
N-Methyldioctylamine, 98%
| 4455-26-9 |
|
n-Pentadecanoic acid, 99%
| 1002-84-2 |
|
Cesium hydroxide
| 21351-79-1 |
|
Triphenylmethyl mercaptan
| 3695-77-0 |
|
2,3,3',4'-Tetramethoxybenzophenone, 98%
| 50625-53-1 |
|
2,3,4-Trimethoxybenzaldehyde, 99%
| 2103-57-3 |
|
Dichloromalononitrile, 97%
| 13063-43-9 |
|
n-(5-Anilino-2,4-pentadienylidene)aniline hydrochloride, 98% (hplc)
| 1497-49-0 |
|
2,6-Dichlorobenzoic Acid, 98+%
| 50-30-6 |
|
3-Benzyloxy-4-Methoxybenzaldehyde, 98%
| 6346-05-0 |
|
2-Chloro-6-Fluorophenylacetonitrile, 98%
| 75279-55-9 |
|
3-Pyridinealdoxime, 98%
| 1193-92-6 |
|
Dibenzoylmethane, 98%
| 120-46-7 |
|
Lead telluride, 99.99%
| 1314-91-6 |
|
Benzoxazole, 99+%
| 273-53-0 |
|
DL-Asparagine Monohydrate, 98%
| 3130-87-8 |
|
2-Aminoresorcinol Hydrochloride, 97% (Titr.)
| 634-60-6 |
|
Sesame Oil
| 8008-74-0 |
|
N-1-(6-Indazolyl)-Sulfanilamide
| 13734-41-3 |
|
3-(4-Methoxyphenyl)-propionic acid, 98%
| 1929-29-9 |
|
1-Phenylnonane, 97%
| 1081-77-2 |
|
3,5-Dichloroanthranilic Acid, 97%
| 2789-92-6 |
|
N-(Tert-Butyl)Benzylamine, 99%
| 3378-72-1 |
|
2'-Bromoacetophenone, 98+%
| 2142-69-0 |
|
Chlorotrimethylsilane, 98%
| 75-77-4 |
|
Linalyl acetate,synthetic, 95-97%(gc)
| 115-95-7 |
|
5,7-Dibromo-8-hydroxyquinoline, 96%
| 521-74-4 |
|
Molecular Sieves, 5A, 4 to 8 Mesh
| 0-00-1 |
|
4-Chloro-3-Nitrobenzaldehyde, 97%
| 16588-34-4 |
|
2-Amino-5-Chlorobenzotrifluoride, 97%
| 445-03-4 |
|
Phosphorus Trichloride, 99% (Titr.)
| 7719-12-2 |
|
2-Methyl-1,3-pentadiene (cis/trans mixture 30/70),99%
| 1118-58-7 |
|
4-Bromo-3-Methylaniline, 99%
| 6933-10-4 |
|
Adipic Acid Monoethyl Ester, 98%
| 626-86-8 |
|
2-Guanidinobenzimidazole, 95%
| 5418-95-1 |
|
Diisobutyl phthalate, 99+% (GC)
| 84-69-5 |
|
Vinylacetic Acid, Tech., 90% Unstabilized
| 625-38-7 |
|
4-Propylbenzoyl Chloride, 99+% (Titr.)
| 52710-27-7 |
|
Hexanoic anhydride, 99%
| 2051-49-2 |
|
2-Hydroxy-6-methylpyridine-3-carboxylic acid, 98%
| 38116-61-9 |
|
5-Benzyloxygramine 99+%
| 1453-97-0 |
|
Ethyl 2-Methylacetoacetate, 98%
| 609-14-3 |
|
2-Fluoro-4-iodotoluene, 99+%
| 39998-81-7 |
|
Tris-(2-Methylallyl)-Amine, 99%
| 6321-40-0 |
|
Hydroxypivalyl hydroxypivalate
| 1115-20-4 |
|
DL-alpha-pinene, 97%
| 2437-95-8 |
|
FMOC-Glycine, 98%
| 29022-11-5 |
|
|