Search   
MSDS 
:
 Benzyl Benzoate, 99+%
CAS 
:
 120-51-4
SYNONYMS 
:
 Benylate; Benzoic Acid, Phenylmethyl Ester; Benzyl     Benzenecarboxylate; Benzyl Phenylformate; Benzyl Alcohol Benzoic     Ester.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 120-51-4 |Benzyl Benzoate | 99 | 204-402-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. Prolonged and/or repeated contact may cause
irritation and/or dermatitis.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Containers may explode in
the heat of a fire. Vapors may be heavier than air. They can spread
along the ground and collect in low or confined areas.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Cool containers with flooding quantities of
water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up
or absorb material, then place into a suitable clean, dry, closed
container for disposal. Avoid generating dusty conditions. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use with adequate
ventilation. Avoid contact with eyes, skin, and clothing. Avoid
contact with skin and eyes. Avoid ingestion and inhalation. Do not
ingest or inhale.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Keep from contact with oxidizing materials.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 120-51-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid above room te
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 323 deg C
Freezing/Melting Point: 21 deg C
Autoignition Temperature: 481 deg C ( 897.80 deg F)
Flash Point: 148 deg C ( 298.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 1.116
Molecular Formula: C14H12O2
Molecular Weight: 212.0828

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, acids, and bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 120-51-4: DG4200000
LD50/LC50:
CAS# 120-51-4: Oral, mouse: LD50 = 1400 uL/kg; Oral, rabbit: LD50 =
1680 mg/kg; Oral, rat: LD50 = 1700 uL/kg; Skin, rabbit: LD50 = 4
gm/kg; Skin, rat: LD50 = 4 mL/kg.
Carcinogenicity:
Benzyl Benzoate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 25 Avoid contact with eyes.
WGK (Water Danger/Protection)
CAS# 120-51-4: 1
Canada
CAS# 120-51-4 is listed on Canada's DSL List.
CAS# 120-51-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 120-51-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/17/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4,5-Trichlorophenyl Disulfide, 98% 3808-87-5
6-Bromo-1-hexanol, 95% (gc) 4286-55-9
Benzyl Benzoate, 99+% 120-51-4
3-Methylcyclohexanol, 99% Mixture of Cis and Trans Isomers 591-23-1
Hexamethylenediamine 124-09-4
syn-2-Methoxy-imino-2-(2-furyl)-acetic acid, sodium salt 99+% 65866-86-6
6,7-Dinitroquinoxaline, 99% 68836-13-5
Hexamethylenetetramine 100-97-0
(s)-(+)-2-Amino-3-methyl-1-butanol, 96% 2026-48-4
Hexanes 96-37-7
Hexane 0-01-1
Triethyl borate, 97% 150-46-9
5-Butylhydantoic acid, 98% (titr.) 63059-33-6
2-Methyl-1,3-dioxolane, 99+% (gc) 497-26-7
1,2-Propyleneglycol diacetate, 98% 623-84-7
Diethyl N-Butylmalonate, 99% 133-08-4
Ethyl Isonipecotate, 97% 1126-09-6
3-Chloro-2-nitrobenzoic acid, 98% 4771-47-5
Acetone cyanohydrin 75-86-5
Hydrazine anhydrous 302-01-2
Hydrazine hydrate, 100% (Hydrazine, 64%) 302-01-2
Bathophenanthrolinedisulfonic acid, disodium salt hydrate, 98% 52746-49-3
Hydrazine dihydrochloride 5341-61-7
Glutaryl Dichloride, 97% 2873-74-7
4-Hydroxyquinoline, 98% 611-36-9
(Dimethylaminomethylene)Malononitrile 16849-88-0
Hydrazine Sulfate 10034-93-2
Copper (I) Cyanide, 99% 544-92-3
Azure ii 37247-10-2
3-Phenoxy-1-propanol, 97% 6180-61-6
1-Methyl-6,7-Dimethoxy-3,4-Dihydroisoquinoline, 99+% 4721-98-6
Hydriodic acid >47% (covers range of products) 7732-18-5
Dimethyl Trans-1,4-Cyclohexanedi-Carboxylate, 99+% 3399-22-2
Hydrobromic acid 44-50% in water 7732-18-5
Fluorosilicic Acid 7732-18-5
Ethyl stains-all 3028-94-2
Phenylethyl Isovalerate, 99% 140-26-1
4-Chloro-3-fluoroanisole, 97% 501-29-1
5-Methoxy-1-indanone , 98% 5111-70-6
1,3-Cyclohexanebis(methylamine), 99% 2579-20-6
4-Fluorobenzyl chloride, 98% 352-11-4
Hydrochloric acid 32-38% solution 7647-01-0
3-Chloro-2-chloromethyl-1-propene, 96% 1871-57-4
Hydrofluoric acid, 47-51% 7664-39-3
4-Amino-2,2,6,6-Tetramethylpiperidino-oxy, Free Radical, 97% 14691-88-4
Iodic Acid 7782-68-5
Hydrogen Peroxide 20-40% 7722-84-1
n-Acetyl-l-glutamic acid, 99% 1188-37-0
Sym-Dimethylhydrazine Dihydrochloride, 99+% 306-37-6
Cyanamide, 99+%, contains stabilizer and a trace of moisture 420-04-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net