Search   
MSDS 
:
 4-Fluorobenzyl chloride, 98%
CAS 
:
 352-11-4
SYNONYMS 
:
 alpha-Chloro-p-fluorotoluene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 352-11-4 |4-Fluorobenzyl chloride | 98 | 206-516-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Flammable liquid and
vapor. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas. Containers may explode
when heated.
Extinguishing Media:
Do NOT use water directly on fire. In case of fire, use water, dry
chemical, chemical foam, or alcohol-resistant foam. Use water spray
to cool fire-exposed containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Do not get in eyes, on skin, or on
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Do not
ingest or inhale. Do not allow contact with water. Discard
contaminated shoes. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames. Use only with adequate ventilation. Keep away from heat,
sparks and flame.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 352-11-4:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 26.5 mbar @ 20
Viscosity: Not available.
Boiling Point: 181.2 deg C @ 760 mm Hg
Freezing/Melting Point: -18 deg C
Autoignition Temperature: 590 deg C ( 1,094.00 deg F)
Flash Point: 60 deg C ( 140.00 deg F)
Explosion Limits, lower: 1.30 vol %
Explosion Limits, upper: .00 vol %
Decomposition Temperature:
Solubility in water: may decompose
Specific Gravity/Density: 1.2070g/cm3
Molecular Formula: C7H6ClF
Molecular Weight: 144.58

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, moisture, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, carbon steel.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 352-11-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Fluorobenzyl chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Corrosive Liquid, Flammable, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing Group: II
IMO
Shipping Name: Corrosive Liquid, Flammable, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing Group: II
RID/ADR
Shipping Name: Corrosive Liquid, Flammable, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 352-11-4: 2
Canada
CAS# 352-11-4 is listed on Canada's NDSL List.
CAS# 352-11-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 352-11-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/23/1998 Revision #2 Date: 5/07/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4,5-Trichlorophenyl Disulfide, 98% 3808-87-5
6-Bromo-1-hexanol, 95% (gc) 4286-55-9
Benzyl Benzoate, 99+% 120-51-4
3-Methylcyclohexanol, 99% Mixture of Cis and Trans Isomers 591-23-1
Hexamethylenediamine 124-09-4
syn-2-Methoxy-imino-2-(2-furyl)-acetic acid, sodium salt 99+% 65866-86-6
6,7-Dinitroquinoxaline, 99% 68836-13-5
Hexamethylenetetramine 100-97-0
(s)-(+)-2-Amino-3-methyl-1-butanol, 96% 2026-48-4
Hexanes 96-37-7
Hexane 0-01-1
Triethyl borate, 97% 150-46-9
5-Butylhydantoic acid, 98% (titr.) 63059-33-6
2-Methyl-1,3-dioxolane, 99+% (gc) 497-26-7
1,2-Propyleneglycol diacetate, 98% 623-84-7
Diethyl N-Butylmalonate, 99% 133-08-4
Ethyl Isonipecotate, 97% 1126-09-6
3-Chloro-2-nitrobenzoic acid, 98% 4771-47-5
Acetone cyanohydrin 75-86-5
Hydrazine anhydrous 302-01-2
Hydrazine hydrate, 100% (Hydrazine, 64%) 302-01-2
Bathophenanthrolinedisulfonic acid, disodium salt hydrate, 98% 52746-49-3
Hydrazine dihydrochloride 5341-61-7
Glutaryl Dichloride, 97% 2873-74-7
4-Hydroxyquinoline, 98% 611-36-9
(Dimethylaminomethylene)Malononitrile 16849-88-0
Hydrazine Sulfate 10034-93-2
Copper (I) Cyanide, 99% 544-92-3
Azure ii 37247-10-2
3-Phenoxy-1-propanol, 97% 6180-61-6
1-Methyl-6,7-Dimethoxy-3,4-Dihydroisoquinoline, 99+% 4721-98-6
Hydriodic acid >47% (covers range of products) 7732-18-5
Dimethyl Trans-1,4-Cyclohexanedi-Carboxylate, 99+% 3399-22-2
Hydrobromic acid 44-50% in water 7732-18-5
Fluorosilicic Acid 7732-18-5
Ethyl stains-all 3028-94-2
Phenylethyl Isovalerate, 99% 140-26-1
4-Chloro-3-fluoroanisole, 97% 501-29-1
5-Methoxy-1-indanone , 98% 5111-70-6
1,3-Cyclohexanebis(methylamine), 99% 2579-20-6
4-Fluorobenzyl chloride, 98% 352-11-4
Hydrochloric acid 32-38% solution 7647-01-0
3-Chloro-2-chloromethyl-1-propene, 96% 1871-57-4
Hydrofluoric acid, 47-51% 7664-39-3
4-Amino-2,2,6,6-Tetramethylpiperidino-oxy, Free Radical, 97% 14691-88-4
Iodic Acid 7782-68-5
Hydrogen Peroxide 20-40% 7722-84-1
n-Acetyl-l-glutamic acid, 99% 1188-37-0
Sym-Dimethylhydrazine Dihydrochloride, 99+% 306-37-6
Cyanamide, 99+%, contains stabilizer and a trace of moisture 420-04-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net