Search   
MSDS 
:
 Hexamethylenediamine
CAS 
:
 124-09-4
SYNONYMS 
:
 1,6-Diaminohexane; 1,6-Hexamethylenediamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 124-09-4 |1,6-Hexanediamine | >98 | 204-679-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 21/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed. Causes
burns.Corrosive.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. May cause conjunctivitis and corneal inflammation.
Skin:
May be absorbed through the skin in harmful amounts. May cause skin
sensitization, an allergic reaction, which becomes evident upon
re-exposure to this material. May cause severe irritation and
possible burns.
Ingestion:
May cause liver damage. May cause severe gastrointestinal tract
irritation with nausea, vomiting and possible burns. Exposure may
cause anemia and other blood abnormalities. May be harmful if
swallowed.
Inhalation:
May cause allergic respiratory reaction. May cause severe irritation
of the respiratory tract with sore throat, coughing, shortness of
breath and delayed lung edema. May cause effects similar to those
described for ingestion.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. May cause
fetal effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. Use water spray to keep fire-exposed
containers cool. Containers may explode in the heat of a fire.
Flammable solid. Vapors may be heavier than air. They can spread
along the ground and collect in low or confined areas. May
polymerize explosively when involved in a fire. Contact with metals
may evolve flammable hydrogen gas.
Extinguishing Media:
Do NOT get water inside containers. For small fires, use dry
chemical, carbon dioxide, or water spray. For large fires, use dry
chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.
Remove all sources of ignition. Use a spark-proof tool. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Ground and bond containers when
transferring material. Avoid contact with skin and eyes. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Do not ingest or inhale.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Corrosives area. Do not store in metal containers.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 124-09-4:

Belgium - TWA: 0.5 ppm VLE; 2.3 mg/m3 VLE
Germany: 2.3 mg/m3 TWA (inhalable fraction)
Germany: Skin absorber
Malaysia: 0.5 ppm TWA; 2.3 mg/m3 TWA
Netherlands: 0.5 ppm MAC; 2.3 mg/m3 MAC
Russia: 0.1 mg/m3 TWA
Spain: 0.5 ppm VLA-ED; 2.4 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: colorless or white
Odor: fish-like - weak odor
pH: Not available.
Vapor Pressure: 3 mm Hg @ 60 deg C
Viscosity: 1.5 cP @ 50 deg C
Boiling Point: 204 deg C
Freezing/Melting Point: 42 deg C
Autoignition Temperature: Not available.
Flash Point: 80 deg C ( 176.00 deg F)
Explosion Limits, lower: 0.7
Explosion Limits, upper: 6.3
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density: 0.848 (water=1)
Molecular Formula: C6H16N2
Molecular Weight: 116.1254

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
High temperatures, ignition sources, moisture, metals, strong
oxidants.
Incompatibilities with Other Materials:
Acids, acid chlorides, acid anhydrides, carbon dioxide, strong
oxidizers.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 124-09-4: MO1180000
LD50/LC50:
CAS# 124-09-4: Oral, rat: LD50 = 750 mg/kg; Skin, rabbit: LD50 =
1110 mg/kg.
Carcinogenicity:
1,6-Hexanediamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: HEXAMETHYLENEDIAMINE, SOLID
Hazard Class: 8
UN Number: 2280
Packing Group: III
IMO
Shipping Name: HEXAMETHYLENEDIAMINE, SOLID
Hazard Class: 8
UN Number: 2280
Packing Group: III
RID/ADR
Shipping Name: HEXAMETHYLENEDIAMINE, SOLID
Hazard Class: 8
UN Number: 2280
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
R 34 Causes burns.
Safety Phrases:
S 22 Do not breathe dust.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 124-09-4: 1
Canada
CAS# 124-09-4 is listed on Canada's DSL List.
CAS# 124-09-4 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 124-09-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/23/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4,5-Trichlorophenyl Disulfide, 98% 3808-87-5
6-Bromo-1-hexanol, 95% (gc) 4286-55-9
Benzyl Benzoate, 99+% 120-51-4
3-Methylcyclohexanol, 99% Mixture of Cis and Trans Isomers 591-23-1
Hexamethylenediamine 124-09-4
syn-2-Methoxy-imino-2-(2-furyl)-acetic acid, sodium salt 99+% 65866-86-6
6,7-Dinitroquinoxaline, 99% 68836-13-5
Hexamethylenetetramine 100-97-0
(s)-(+)-2-Amino-3-methyl-1-butanol, 96% 2026-48-4
Hexanes 96-37-7
Hexane 0-01-1
Triethyl borate, 97% 150-46-9
5-Butylhydantoic acid, 98% (titr.) 63059-33-6
2-Methyl-1,3-dioxolane, 99+% (gc) 497-26-7
1,2-Propyleneglycol diacetate, 98% 623-84-7
Diethyl N-Butylmalonate, 99% 133-08-4
Ethyl Isonipecotate, 97% 1126-09-6
3-Chloro-2-nitrobenzoic acid, 98% 4771-47-5
Acetone cyanohydrin 75-86-5
Hydrazine anhydrous 302-01-2
Hydrazine hydrate, 100% (Hydrazine, 64%) 302-01-2
Bathophenanthrolinedisulfonic acid, disodium salt hydrate, 98% 52746-49-3
Hydrazine dihydrochloride 5341-61-7
Glutaryl Dichloride, 97% 2873-74-7
4-Hydroxyquinoline, 98% 611-36-9
(Dimethylaminomethylene)Malononitrile 16849-88-0
Hydrazine Sulfate 10034-93-2
Copper (I) Cyanide, 99% 544-92-3
Azure ii 37247-10-2
3-Phenoxy-1-propanol, 97% 6180-61-6
1-Methyl-6,7-Dimethoxy-3,4-Dihydroisoquinoline, 99+% 4721-98-6
Hydriodic acid >47% (covers range of products) 7732-18-5
Dimethyl Trans-1,4-Cyclohexanedi-Carboxylate, 99+% 3399-22-2
Hydrobromic acid 44-50% in water 7732-18-5
Fluorosilicic Acid 7732-18-5
Ethyl stains-all 3028-94-2
Phenylethyl Isovalerate, 99% 140-26-1
4-Chloro-3-fluoroanisole, 97% 501-29-1
5-Methoxy-1-indanone , 98% 5111-70-6
1,3-Cyclohexanebis(methylamine), 99% 2579-20-6
4-Fluorobenzyl chloride, 98% 352-11-4
Hydrochloric acid 32-38% solution 7647-01-0
3-Chloro-2-chloromethyl-1-propene, 96% 1871-57-4
Hydrofluoric acid, 47-51% 7664-39-3
4-Amino-2,2,6,6-Tetramethylpiperidino-oxy, Free Radical, 97% 14691-88-4
Iodic Acid 7782-68-5
Hydrogen Peroxide 20-40% 7722-84-1
n-Acetyl-l-glutamic acid, 99% 1188-37-0
Sym-Dimethylhydrazine Dihydrochloride, 99+% 306-37-6
Cyanamide, 99+%, contains stabilizer and a trace of moisture 420-04-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net