**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 623-84-7 |1,2-Propyleneglycol diacetate | 98 | 210-817-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Inhalation at high concentrations may cause CNS
depression and asphixiation.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep away from heat, sparks and flame. Avoid ingestion
and inhalation. Use only in a chemical fume hood. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 623-84-7:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 190.0 - 191.0 deg C @ 760.00m
Freezing/Melting Point: -31 deg C
Autoignition Temperature: Not applicable.
Flash Point: 87 deg C ( 188.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: 1.0590g/cm3
Molecular Formula: C7H12O4
Molecular Weight: 160.17
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, acrid smoke and fumes.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 623-84-7: TY4900000
LD50/LC50:
CAS# 623-84-7: Draize test, rabbit, eye: 500 mg Moderate; Oral, rat:
LD50 = 13530 mg/kg.
Carcinogenicity:
1,2-Propyleneglycol diacetate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 623-84-7: 1
Canada
CAS# 623-84-7 is listed on Canada's DSL List.
CAS# 623-84-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 623-84-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2,4,5-Trichlorophenyl Disulfide, 98%
| 3808-87-5 |
|
6-Bromo-1-hexanol, 95% (gc)
| 4286-55-9 |
|
Benzyl Benzoate, 99+%
| 120-51-4 |
|
3-Methylcyclohexanol, 99% Mixture of Cis and Trans Isomers
| 591-23-1 |
|
Hexamethylenediamine
| 124-09-4 |
|
syn-2-Methoxy-imino-2-(2-furyl)-acetic acid, sodium salt 99+%
| 65866-86-6 |
|
6,7-Dinitroquinoxaline, 99%
| 68836-13-5 |
|
Hexamethylenetetramine
| 100-97-0 |
|
(s)-(+)-2-Amino-3-methyl-1-butanol, 96%
| 2026-48-4 |
|
Hexanes
| 96-37-7 |
|
Hexane
| 0-01-1 |
|
Triethyl borate, 97%
| 150-46-9 |
|
5-Butylhydantoic acid, 98% (titr.)
| 63059-33-6 |
|
2-Methyl-1,3-dioxolane, 99+% (gc)
| 497-26-7 |
|
1,2-Propyleneglycol diacetate, 98%
| 623-84-7 |
|
Diethyl N-Butylmalonate, 99%
| 133-08-4 |
|
Ethyl Isonipecotate, 97%
| 1126-09-6 |
|
3-Chloro-2-nitrobenzoic acid, 98%
| 4771-47-5 |
|
Acetone cyanohydrin
| 75-86-5 |
|
Hydrazine anhydrous
| 302-01-2 |
|
Hydrazine hydrate, 100% (Hydrazine, 64%)
| 302-01-2 |
|
Bathophenanthrolinedisulfonic acid, disodium salt hydrate, 98%
| 52746-49-3 |
|
Hydrazine dihydrochloride
| 5341-61-7 |
|
Glutaryl Dichloride, 97%
| 2873-74-7 |
|
4-Hydroxyquinoline, 98%
| 611-36-9 |
|
(Dimethylaminomethylene)Malononitrile
| 16849-88-0 |
|
Hydrazine Sulfate
| 10034-93-2 |
|
Copper (I) Cyanide, 99%
| 544-92-3 |
|
Azure ii
| 37247-10-2 |
|
3-Phenoxy-1-propanol, 97%
| 6180-61-6 |
|
1-Methyl-6,7-Dimethoxy-3,4-Dihydroisoquinoline, 99+%
| 4721-98-6 |
|
Hydriodic acid >47% (covers range of products)
| 7732-18-5 |
|
Dimethyl Trans-1,4-Cyclohexanedi-Carboxylate, 99+%
| 3399-22-2 |
|
Hydrobromic acid 44-50% in water
| 7732-18-5 |
|
Fluorosilicic Acid
| 7732-18-5 |
|
Ethyl stains-all
| 3028-94-2 |
|
Phenylethyl Isovalerate, 99%
| 140-26-1 |
|
4-Chloro-3-fluoroanisole, 97%
| 501-29-1 |
|
5-Methoxy-1-indanone , 98%
| 5111-70-6 |
|
1,3-Cyclohexanebis(methylamine), 99%
| 2579-20-6 |
|
4-Fluorobenzyl chloride, 98%
| 352-11-4 |
|
Hydrochloric acid 32-38% solution
| 7647-01-0 |
|
3-Chloro-2-chloromethyl-1-propene, 96%
| 1871-57-4 |
|
Hydrofluoric acid, 47-51%
| 7664-39-3 |
|
4-Amino-2,2,6,6-Tetramethylpiperidino-oxy, Free Radical, 97%
| 14691-88-4 |
|
Iodic Acid
| 7782-68-5 |
|
Hydrogen Peroxide 20-40%
| 7722-84-1 |
|
n-Acetyl-l-glutamic acid, 99%
| 1188-37-0 |
|
Sym-Dimethylhydrazine Dihydrochloride, 99+%
| 306-37-6 |
|
Cyanamide, 99+%, contains stabilizer and a trace of moisture
| 420-04-2 |
|
|