Search   
MSDS 
:
 6-Bromo-1-hexanol, 95% (gc)
CAS 
:
 4286-55-9
SYNONYMS 
:
 1-Bromo-6-hydroxyhexane
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4286-55-9 |6-BROMO-1-HEXANOL | 95% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a tightly closed container. Store in a dry area. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4286-55-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 105 - 106 deg C @ 5.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H13BrO
Molecular Weight: 181.07

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, acid chlorides, acid anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4286-55-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
6-BROMO-1-HEXANOL -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 4286-55-9: No information available.
Canada
CAS# 4286-55-9 is listed on Canada's NDSL List.
CAS# 4286-55-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4286-55-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4,5-Trichlorophenyl Disulfide, 98% 3808-87-5
6-Bromo-1-hexanol, 95% (gc) 4286-55-9
Benzyl Benzoate, 99+% 120-51-4
3-Methylcyclohexanol, 99% Mixture of Cis and Trans Isomers 591-23-1
Hexamethylenediamine 124-09-4
syn-2-Methoxy-imino-2-(2-furyl)-acetic acid, sodium salt 99+% 65866-86-6
6,7-Dinitroquinoxaline, 99% 68836-13-5
Hexamethylenetetramine 100-97-0
(s)-(+)-2-Amino-3-methyl-1-butanol, 96% 2026-48-4
Hexanes 96-37-7
Hexane 0-01-1
Triethyl borate, 97% 150-46-9
5-Butylhydantoic acid, 98% (titr.) 63059-33-6
2-Methyl-1,3-dioxolane, 99+% (gc) 497-26-7
1,2-Propyleneglycol diacetate, 98% 623-84-7
Diethyl N-Butylmalonate, 99% 133-08-4
Ethyl Isonipecotate, 97% 1126-09-6
3-Chloro-2-nitrobenzoic acid, 98% 4771-47-5
Acetone cyanohydrin 75-86-5
Hydrazine anhydrous 302-01-2
Hydrazine hydrate, 100% (Hydrazine, 64%) 302-01-2
Bathophenanthrolinedisulfonic acid, disodium salt hydrate, 98% 52746-49-3
Hydrazine dihydrochloride 5341-61-7
Glutaryl Dichloride, 97% 2873-74-7
4-Hydroxyquinoline, 98% 611-36-9
(Dimethylaminomethylene)Malononitrile 16849-88-0
Hydrazine Sulfate 10034-93-2
Copper (I) Cyanide, 99% 544-92-3
Azure ii 37247-10-2
3-Phenoxy-1-propanol, 97% 6180-61-6
1-Methyl-6,7-Dimethoxy-3,4-Dihydroisoquinoline, 99+% 4721-98-6
Hydriodic acid >47% (covers range of products) 7732-18-5
Dimethyl Trans-1,4-Cyclohexanedi-Carboxylate, 99+% 3399-22-2
Hydrobromic acid 44-50% in water 7732-18-5
Fluorosilicic Acid 7732-18-5
Ethyl stains-all 3028-94-2
Phenylethyl Isovalerate, 99% 140-26-1
4-Chloro-3-fluoroanisole, 97% 501-29-1
5-Methoxy-1-indanone , 98% 5111-70-6
1,3-Cyclohexanebis(methylamine), 99% 2579-20-6
4-Fluorobenzyl chloride, 98% 352-11-4
Hydrochloric acid 32-38% solution 7647-01-0
3-Chloro-2-chloromethyl-1-propene, 96% 1871-57-4
Hydrofluoric acid, 47-51% 7664-39-3
4-Amino-2,2,6,6-Tetramethylpiperidino-oxy, Free Radical, 97% 14691-88-4
Iodic Acid 7782-68-5
Hydrogen Peroxide 20-40% 7722-84-1
n-Acetyl-l-glutamic acid, 99% 1188-37-0
Sym-Dimethylhydrazine Dihydrochloride, 99+% 306-37-6
Cyanamide, 99+%, contains stabilizer and a trace of moisture 420-04-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net