**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 123-35-3 |Myrcene, tech. | 88 | 204-622-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 10
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable.
Potential Health Effects
Eye:
Causes moderate eye irritation. May cause eye burns.
Skin:
Causes moderate skin irritation. May cause skin burns.
Ingestion:
May cause digestive tract disturbances.
Inhalation:
May cause respiratory tract irritation. Vapors may cause dizziness
or suffocation.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas. May
polymerize explosively when involved in a fire.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors. Water spray may
reduce vapor but may not prevent ignition in closed spaces.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Use with adequate ventilation. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 123-35-3:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear colorless to yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: 7 mmHg @ 20 C
Viscosity: Not available.
Boiling Point: 167 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 39 deg C ( 102.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: glacial acetic acid
Specific Gravity/Density: .8010g/cm3
Molecular Formula: C10H16
Molecular Weight: 136.24
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 123-35-3: RG5365000
LD50/LC50:
CAS# 123-35-3: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral,
rat: LD50 = >5 gm/kg; Skin, rabbit: LD50 = >5 gm/kg.
Carcinogenicity:
Myrcene, tech. -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TERPENE HYDROCARBONS, N.O.S.
Hazard Class: 3
UN Number: 2319
Packing Group: III
IMO
Shipping Name: TERPENE HYDROCARBONS; N.O.S.
Hazard Class: 3.3
UN Number: 2319
Packing Group: III
RID/ADR
Shipping Name: TERPENE HYDROCARBONS, N.O.S.
Hazard Class: 3
UN Number: 2319
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
S 50A Do not mix with acids.
WGK (Water Danger/Protection)
CAS# 123-35-3: No information available.
Canada
CAS# 123-35-3 is listed on Canada's DSL List.
CAS# 123-35-3 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 123-35-3 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/08/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Calcion
| 3810-39-7 |
|
(-)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone
| 67-64-1 |
|
6-Chloro-7-Nitroquinoxaline, 99+%
| 109541-21-1 |
|
2-Methoxy-1-Naphthonitrile
| 16000-39-8 |
|
(S)-(+)-gamma-Toluenesulfonylmethyl-gamma-butyrolactone, 99+%
| 58879-34-8 |
|
3-Chloro-2-butanone, tech., 95%
| 4089-07-0 |
|
2,6,10,14-Tetramethylpentadecane,96%
| 1921-70-6 |
|
2-(Tert-Butyl)Anthracene, 98%
| 18801-00-8 |
|
2,3-Dichloroquinoxaline, 97%
| 2213-63-0 |
|
4-Chloroanisole, 99%
| 623-12-1 |
|
2,4-Dinitrophenylhydrazine, moist solid, contains minimum of 30%
| 119-26-6 |
|
Dl-tert-butylglycine, 99%
| 33105-81-6 |
|
4-(2-Aminoethyl)morpholine, 99% (GC)
| 2038-03-1 |
|
R,S-3-Butene-1,2-diol, 99+%
| 497-06-3 |
|
2-Chloroacetamide, 98.0%
| 79-07-2 |
|
Octadecane, 99% (gc)
| 593-45-3 |
|
Rubidium Atomic Absorption Standard Solution, 1 mg/ml Rb in 2% HCl
| 7440-17-7 |
|
1-(4-Chlorophenyl)piperazine, 98%(titr.)
| 38212-33-8 |
|
Bromotrimethylsilane, 98%
| 2857-97-8 |
|
Dichloroacetic anhydride, 98%
| 4124-30-5 |
|
2,6-Dichloro-p-benzoquinone
| 697-82-5 |
|
Ethoxyacetic acid, 98%
| 627-03-2 |
|
Pamoic Acid, Disodium Salt Monohydrate (Pract), 95% (UV-Vis)
| 6640-22-8 |
|
4-Chlorobenzhydrylchloride, 99+%
| 134-83-8 |
|
4-Amino-1-benzylpiperidine dihydrochloride hydrate
| 1205-72-7 |
|
1-Butanesulfonyl Chloride, 99% (Titr.)
| 2386-60-9 |
|
N-Fluoropyridinium Triflate, 95%
| 107263-95-6 |
|
6-Aminochrysene, 97%
| 2642-98-0 |
|
Potassium fluoride, p.a.
| 7789-23-3 |
|
Myrcene, tech., 90+%,stabilized with 400 p pm tenox gt-1
| 123-35-3 |
|
Bis(Phenylthio)Methane, 97% (GC)
| 3561-67-9 |
|
2',3'-O-Isopropylideneadenosine, 98%
| 362-75-4 |
|
3-Acetylpyridine, 98%
| 350-03-8 |
|
Ethyl 3-Bromopropionate, 99% (GC)
| 539-74-2 |
|
1-Bromo-3,3-diphenylpropane, 99%
| 20017-68-9 |
|
1,2-Dibenzoylbenzene, 97%
| 1159-86-0 |
|
Cibacron brilliant red 3b-a
| 17681-50-4 |
|
2-Ketoglutaric acid,disodium salt, dihydrate, 99%
| 305-72-6 |
|
Methyl octanoate, 99% (gc)
| 111-11-5 |
|
Tungsten Hexacarbonyl, 99%
| 14040-11-0 |
|
n-(Trimethylsilyl)-imidazole, 98%
| 18156-74-6 |
|
Fluoresceinamine, isomer II
| 51649-83-3 |
|
Ethyl-O-Mesitylsulfonylaceto-Hydroxamate, 99%
| 38202-27-6 |
|
Fast Red Al Salt
| 16048-40-1 |
|
Methyl 4-methoxysalicylate, 98%
| 5446-02-6 |
|
2-Methyl-1,4-naphthoquinone
| 58-27-5 |
|
18 Beta-Glycyrrhetinic Acid, 98+% (Titr., on the Anhydrous Basis)
| 471-53-4 |
|
5-Bromouracil, 98%
| 51-20-7 |
|
2,2-Bis(4-Hydroxy-3-Methylphenylpropane)
| 79-97-0 |
|
Chlorotriethylsilane, 99%
| 994-30-9 |
|
|