Search   
MSDS 
:
 2-Chloroacetamide, 98.0%
CAS 
:
 79-07-2
SYNONYMS 
:
 Chloroacetamide; Alpha-Chloroacetamide; 2-Chloroethanamide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 79-07-2 |2-Chloroacetamide | 98.0 | 201-174-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25 43 62

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed. May cause sensitization by skin contact.
Possible risk of impaired fertility.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
May cause paralysis of the extremities.
Inhalation:
May cause respiratory tract irritation. May cause dyspnea (difficult
or labored breathing). May cause headache. May cause nausea and
possible vomiting.
Chronic:
Adverse reproductive effects have been reported in animals.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Destroy
contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. Do NOT use mouth-to-mouth resuscitation. If
breathing has ceased apply artificial respiration using oxygen and a
suitable mechanical device such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Do not get on skin or in eyes. Do not
ingest or inhale.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 79-07-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 224.5 deg C @ 760.00mmHg
Freezing/Melting Point: 116.00 - 118.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >117 deg C
Solubility in water: insoluble in ether
Specific Gravity/Density:
Molecular Formula: C2H4ClNO
Molecular Weight: 93.51

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong reducing agents, strong acids, strong bases.
Hazardous Decomposition Products:
Chlorine, nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 79-07-2: AB5075000
LD50/LC50:
CAS# 79-07-2: Oral, mouse: LD50 = 155 mg/kg; Oral, rabbit: LD50 =
122 mg/kg; Oral, rat: LD50 = 138 mg/kg.
Carcinogenicity:
2-Chloroacetamide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
R 43 May cause sensitization by skin contact.
R 62 Possible risk of impaired fertility.
Safety Phrases:
S 22 Do not breathe dust.
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 79-07-2: 2
Canada
CAS# 79-07-2 is listed on Canada's DSL List.
CAS# 79-07-2 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 79-07-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/08/1999 Revision #3 Date: 1/13/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Calcion 3810-39-7
(-)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone 67-64-1
6-Chloro-7-Nitroquinoxaline, 99+% 109541-21-1
2-Methoxy-1-Naphthonitrile 16000-39-8
(S)-(+)-gamma-Toluenesulfonylmethyl-gamma-butyrolactone, 99+% 58879-34-8
3-Chloro-2-butanone, tech., 95% 4089-07-0
2,6,10,14-Tetramethylpentadecane,96% 1921-70-6
2-(Tert-Butyl)Anthracene, 98% 18801-00-8
2,3-Dichloroquinoxaline, 97% 2213-63-0
4-Chloroanisole, 99% 623-12-1
2,4-Dinitrophenylhydrazine, moist solid, contains minimum of 30% 119-26-6
Dl-tert-butylglycine, 99% 33105-81-6
4-(2-Aminoethyl)morpholine, 99% (GC) 2038-03-1
R,S-3-Butene-1,2-diol, 99+% 497-06-3
2-Chloroacetamide, 98.0% 79-07-2
Octadecane, 99% (gc) 593-45-3
Rubidium Atomic Absorption Standard Solution, 1 mg/ml Rb in 2% HCl 7440-17-7
1-(4-Chlorophenyl)piperazine, 98%(titr.) 38212-33-8
Bromotrimethylsilane, 98% 2857-97-8
Dichloroacetic anhydride, 98% 4124-30-5
2,6-Dichloro-p-benzoquinone 697-82-5
Ethoxyacetic acid, 98% 627-03-2
Pamoic Acid, Disodium Salt Monohydrate (Pract), 95% (UV-Vis) 6640-22-8
4-Chlorobenzhydrylchloride, 99+% 134-83-8
4-Amino-1-benzylpiperidine dihydrochloride hydrate 1205-72-7
1-Butanesulfonyl Chloride, 99% (Titr.) 2386-60-9
N-Fluoropyridinium Triflate, 95% 107263-95-6
6-Aminochrysene, 97% 2642-98-0
Potassium fluoride, p.a. 7789-23-3
Myrcene, tech., 90+%,stabilized with 400 p pm tenox gt-1 123-35-3
Bis(Phenylthio)Methane, 97% (GC) 3561-67-9
2',3'-O-Isopropylideneadenosine, 98% 362-75-4
3-Acetylpyridine, 98% 350-03-8
Ethyl 3-Bromopropionate, 99% (GC) 539-74-2
1-Bromo-3,3-diphenylpropane, 99% 20017-68-9
1,2-Dibenzoylbenzene, 97% 1159-86-0
Cibacron brilliant red 3b-a 17681-50-4
2-Ketoglutaric acid,disodium salt, dihydrate, 99% 305-72-6
Methyl octanoate, 99% (gc) 111-11-5
Tungsten Hexacarbonyl, 99% 14040-11-0
n-(Trimethylsilyl)-imidazole, 98% 18156-74-6
Fluoresceinamine, isomer II 51649-83-3
Ethyl-O-Mesitylsulfonylaceto-Hydroxamate, 99% 38202-27-6
Fast Red Al Salt 16048-40-1
Methyl 4-methoxysalicylate, 98% 5446-02-6
2-Methyl-1,4-naphthoquinone 58-27-5
18 Beta-Glycyrrhetinic Acid, 98+% (Titr., on the Anhydrous Basis) 471-53-4
5-Bromouracil, 98% 51-20-7
2,2-Bis(4-Hydroxy-3-Methylphenylpropane) 79-97-0
Chlorotriethylsilane, 99% 994-30-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net