**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2386-60-9 |1-BUTANESULFONYL CHLORIDE | 99 | 219-204-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Lachrymator (substance which
increases the flow of tears).Corrosive.
Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Do NOT allow victim
to rub eyes or keep eyes closed. Extensive irrigation with water is
required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Do NOT use water directly on fire. Use foam, dry chemical, or carbon
dioxide. Do NOT get water inside containers. Cool containers with
flooding quantities of water until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation. Do not get water inside
containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale. Use with adequate ventilation. Do not allow contact with
water. Use only in a chemical fume hood. Discard contaminated shoes.
Keep from contact with moist air and steam.
Storage:
Keep away from sources of ignition. Keep container closed when not
in use. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area. Store protected from
moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2386-60-9:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: 0.5 mm Hg @ 20 deg
Viscosity: Not available.
Boiling Point: 96 deg C @ 21.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 96 deg C ( 204.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: decomposes in water
Specific Gravity/Density: 1.2080g/cm3
Molecular Formula: C4H9ClO2S
Molecular Weight: 156.63
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents, strong reducing
agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 2386-60-9: EK5950000
LD50/LC50:
Not available.
Carcinogenicity:
1-BUTANESULFONYL CHLORIDE -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2386-60-9: No information available.
Canada
CAS# 2386-60-9 is listed on Canada's NDSL List.
CAS# 2386-60-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2386-60-9 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/15/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Calcion
| 3810-39-7 |
|
(-)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone
| 67-64-1 |
|
6-Chloro-7-Nitroquinoxaline, 99+%
| 109541-21-1 |
|
2-Methoxy-1-Naphthonitrile
| 16000-39-8 |
|
(S)-(+)-gamma-Toluenesulfonylmethyl-gamma-butyrolactone, 99+%
| 58879-34-8 |
|
3-Chloro-2-butanone, tech., 95%
| 4089-07-0 |
|
2,6,10,14-Tetramethylpentadecane,96%
| 1921-70-6 |
|
2-(Tert-Butyl)Anthracene, 98%
| 18801-00-8 |
|
2,3-Dichloroquinoxaline, 97%
| 2213-63-0 |
|
4-Chloroanisole, 99%
| 623-12-1 |
|
2,4-Dinitrophenylhydrazine, moist solid, contains minimum of 30%
| 119-26-6 |
|
Dl-tert-butylglycine, 99%
| 33105-81-6 |
|
4-(2-Aminoethyl)morpholine, 99% (GC)
| 2038-03-1 |
|
R,S-3-Butene-1,2-diol, 99+%
| 497-06-3 |
|
2-Chloroacetamide, 98.0%
| 79-07-2 |
|
Octadecane, 99% (gc)
| 593-45-3 |
|
Rubidium Atomic Absorption Standard Solution, 1 mg/ml Rb in 2% HCl
| 7440-17-7 |
|
1-(4-Chlorophenyl)piperazine, 98%(titr.)
| 38212-33-8 |
|
Bromotrimethylsilane, 98%
| 2857-97-8 |
|
Dichloroacetic anhydride, 98%
| 4124-30-5 |
|
2,6-Dichloro-p-benzoquinone
| 697-82-5 |
|
Ethoxyacetic acid, 98%
| 627-03-2 |
|
Pamoic Acid, Disodium Salt Monohydrate (Pract), 95% (UV-Vis)
| 6640-22-8 |
|
4-Chlorobenzhydrylchloride, 99+%
| 134-83-8 |
|
4-Amino-1-benzylpiperidine dihydrochloride hydrate
| 1205-72-7 |
|
1-Butanesulfonyl Chloride, 99% (Titr.)
| 2386-60-9 |
|
N-Fluoropyridinium Triflate, 95%
| 107263-95-6 |
|
6-Aminochrysene, 97%
| 2642-98-0 |
|
Potassium fluoride, p.a.
| 7789-23-3 |
|
Myrcene, tech., 90+%,stabilized with 400 p pm tenox gt-1
| 123-35-3 |
|
Bis(Phenylthio)Methane, 97% (GC)
| 3561-67-9 |
|
2',3'-O-Isopropylideneadenosine, 98%
| 362-75-4 |
|
3-Acetylpyridine, 98%
| 350-03-8 |
|
Ethyl 3-Bromopropionate, 99% (GC)
| 539-74-2 |
|
1-Bromo-3,3-diphenylpropane, 99%
| 20017-68-9 |
|
1,2-Dibenzoylbenzene, 97%
| 1159-86-0 |
|
Cibacron brilliant red 3b-a
| 17681-50-4 |
|
2-Ketoglutaric acid,disodium salt, dihydrate, 99%
| 305-72-6 |
|
Methyl octanoate, 99% (gc)
| 111-11-5 |
|
Tungsten Hexacarbonyl, 99%
| 14040-11-0 |
|
n-(Trimethylsilyl)-imidazole, 98%
| 18156-74-6 |
|
Fluoresceinamine, isomer II
| 51649-83-3 |
|
Ethyl-O-Mesitylsulfonylaceto-Hydroxamate, 99%
| 38202-27-6 |
|
Fast Red Al Salt
| 16048-40-1 |
|
Methyl 4-methoxysalicylate, 98%
| 5446-02-6 |
|
2-Methyl-1,4-naphthoquinone
| 58-27-5 |
|
18 Beta-Glycyrrhetinic Acid, 98+% (Titr., on the Anhydrous Basis)
| 471-53-4 |
|
5-Bromouracil, 98%
| 51-20-7 |
|
2,2-Bis(4-Hydroxy-3-Methylphenylpropane)
| 79-97-0 |
|
Chlorotriethylsilane, 99%
| 994-30-9 |
|
|