Search   
MSDS 
:
 R,S-3-Butene-1,2-diol, 99+%
CAS 
:
 497-06-3
SYNONYMS 
:
 3-Butene-1,2-diol; Erythrol; 1,2-Dihydroxy-3-butene;     1-Butene-3,4-diol; 3,4-Dihydroxy-1-butene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 497-06-3 |3-Butene-1,2-diol | >99 | 207-835-1 |
|----------------|--------------------------------------|----------|-----------|
| 86161-40-2 |Deleted Registry Number. Replace with | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Fire or excessive heat may result in violent
rupture of the container due to bulk polymerization.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Avoid breathing spray or mist. Pure vapor
will be uninhibited and may polymerize in vents or other confined
spaces.
Storage:
Store in a tightly closed container. Keep refrigerated. (Store below
4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 497-06-3:

CAS# 86161-40-2:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Slight alcoholic odor.
pH: Not available.
Vapor Pressure: 0.24 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 196.5 deg C @ 760 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 105 deg C ( 221.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density: 1.040 g/ml
Molecular Formula: C4H8O2
Molecular Weight: 88.11

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Excess heat, pressure, contamination.
Incompatibilities with Other Materials:
Strong oxidizing agents, polymerizing initiators, polymerization
catalysts.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 497-06-3 unlisted.
CAS# 86161-40-2 unlisted.
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
3-Butene-1,2-diol -
Not listed by ACGIH, IARC, or NTP.
Deleted Registry Number. Replace with 497-06-3. -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 497-06-3: No information available.
CAS# 86161-40-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 497-06-3 is not listed on Canada's Ingredient Disclosure List.
CAS# 86161-40-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 497-06-3 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 86161-40-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/24/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Calcion 3810-39-7
(-)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone 67-64-1
6-Chloro-7-Nitroquinoxaline, 99+% 109541-21-1
2-Methoxy-1-Naphthonitrile 16000-39-8
(S)-(+)-gamma-Toluenesulfonylmethyl-gamma-butyrolactone, 99+% 58879-34-8
3-Chloro-2-butanone, tech., 95% 4089-07-0
2,6,10,14-Tetramethylpentadecane,96% 1921-70-6
2-(Tert-Butyl)Anthracene, 98% 18801-00-8
2,3-Dichloroquinoxaline, 97% 2213-63-0
4-Chloroanisole, 99% 623-12-1
2,4-Dinitrophenylhydrazine, moist solid, contains minimum of 30% 119-26-6
Dl-tert-butylglycine, 99% 33105-81-6
4-(2-Aminoethyl)morpholine, 99% (GC) 2038-03-1
R,S-3-Butene-1,2-diol, 99+% 497-06-3
2-Chloroacetamide, 98.0% 79-07-2
Octadecane, 99% (gc) 593-45-3
Rubidium Atomic Absorption Standard Solution, 1 mg/ml Rb in 2% HCl 7440-17-7
1-(4-Chlorophenyl)piperazine, 98%(titr.) 38212-33-8
Bromotrimethylsilane, 98% 2857-97-8
Dichloroacetic anhydride, 98% 4124-30-5
2,6-Dichloro-p-benzoquinone 697-82-5
Ethoxyacetic acid, 98% 627-03-2
Pamoic Acid, Disodium Salt Monohydrate (Pract), 95% (UV-Vis) 6640-22-8
4-Chlorobenzhydrylchloride, 99+% 134-83-8
4-Amino-1-benzylpiperidine dihydrochloride hydrate 1205-72-7
1-Butanesulfonyl Chloride, 99% (Titr.) 2386-60-9
N-Fluoropyridinium Triflate, 95% 107263-95-6
6-Aminochrysene, 97% 2642-98-0
Potassium fluoride, p.a. 7789-23-3
Myrcene, tech., 90+%,stabilized with 400 p pm tenox gt-1 123-35-3
Bis(Phenylthio)Methane, 97% (GC) 3561-67-9
2',3'-O-Isopropylideneadenosine, 98% 362-75-4
3-Acetylpyridine, 98% 350-03-8
Ethyl 3-Bromopropionate, 99% (GC) 539-74-2
1-Bromo-3,3-diphenylpropane, 99% 20017-68-9
1,2-Dibenzoylbenzene, 97% 1159-86-0
Cibacron brilliant red 3b-a 17681-50-4
2-Ketoglutaric acid,disodium salt, dihydrate, 99% 305-72-6
Methyl octanoate, 99% (gc) 111-11-5
Tungsten Hexacarbonyl, 99% 14040-11-0
n-(Trimethylsilyl)-imidazole, 98% 18156-74-6
Fluoresceinamine, isomer II 51649-83-3
Ethyl-O-Mesitylsulfonylaceto-Hydroxamate, 99% 38202-27-6
Fast Red Al Salt 16048-40-1
Methyl 4-methoxysalicylate, 98% 5446-02-6
2-Methyl-1,4-naphthoquinone 58-27-5
18 Beta-Glycyrrhetinic Acid, 98+% (Titr., on the Anhydrous Basis) 471-53-4
5-Bromouracil, 98% 51-20-7
2,2-Bis(4-Hydroxy-3-Methylphenylpropane) 79-97-0
Chlorotriethylsilane, 99% 994-30-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net