Search   
MSDS 
:
 4-Chlorobenzhydrylchloride, 99+%
CAS 
:
 134-83-8
SYNONYMS 
:
 Chloro(4-chlorophenyl)phenylmethane
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 134-83-8 |Benzene, 1-chloro-4-(chlorophenylmethy| 99+% | 205-158-6 |
| |l)- | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. Lachrymator (substance which increases the flow of tears).
Lachrymator (substance which increases the flow of tears).
Skin:
May cause severe irritation and possible burns.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting
unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 134-83-8:


Personal Protective Equipment

Eyes:
Wear safety glasses and chemical goggles if splashing
is possible.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear slightly yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 159 - 160 deg C @ 2.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: immiscible with water
Specific Gravity/Density: 1.2400g/cm3
Molecular Formula: C13H10Cl2
Molecular Weight: 237.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, alkali hydroxides, amines.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 134-83-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzene, 1-chloro-4-(chlorophenylmethyl)- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Water danger/protection: WGK 2

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 134-83-8: No information available.
Canada
CAS# 134-83-8 is listed on Canada's NDSL List.
CAS# 134-83-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 134-83-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 12/03/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Calcion 3810-39-7
(-)-1-(9-Fluorenyl)ethyl chloroformate, 0.5 w/v % solution in acetone 67-64-1
6-Chloro-7-Nitroquinoxaline, 99+% 109541-21-1
2-Methoxy-1-Naphthonitrile 16000-39-8
(S)-(+)-gamma-Toluenesulfonylmethyl-gamma-butyrolactone, 99+% 58879-34-8
3-Chloro-2-butanone, tech., 95% 4089-07-0
2,6,10,14-Tetramethylpentadecane,96% 1921-70-6
2-(Tert-Butyl)Anthracene, 98% 18801-00-8
2,3-Dichloroquinoxaline, 97% 2213-63-0
4-Chloroanisole, 99% 623-12-1
2,4-Dinitrophenylhydrazine, moist solid, contains minimum of 30% 119-26-6
Dl-tert-butylglycine, 99% 33105-81-6
4-(2-Aminoethyl)morpholine, 99% (GC) 2038-03-1
R,S-3-Butene-1,2-diol, 99+% 497-06-3
2-Chloroacetamide, 98.0% 79-07-2
Octadecane, 99% (gc) 593-45-3
Rubidium Atomic Absorption Standard Solution, 1 mg/ml Rb in 2% HCl 7440-17-7
1-(4-Chlorophenyl)piperazine, 98%(titr.) 38212-33-8
Bromotrimethylsilane, 98% 2857-97-8
Dichloroacetic anhydride, 98% 4124-30-5
2,6-Dichloro-p-benzoquinone 697-82-5
Ethoxyacetic acid, 98% 627-03-2
Pamoic Acid, Disodium Salt Monohydrate (Pract), 95% (UV-Vis) 6640-22-8
4-Chlorobenzhydrylchloride, 99+% 134-83-8
4-Amino-1-benzylpiperidine dihydrochloride hydrate 1205-72-7
1-Butanesulfonyl Chloride, 99% (Titr.) 2386-60-9
N-Fluoropyridinium Triflate, 95% 107263-95-6
6-Aminochrysene, 97% 2642-98-0
Potassium fluoride, p.a. 7789-23-3
Myrcene, tech., 90+%,stabilized with 400 p pm tenox gt-1 123-35-3
Bis(Phenylthio)Methane, 97% (GC) 3561-67-9
2',3'-O-Isopropylideneadenosine, 98% 362-75-4
3-Acetylpyridine, 98% 350-03-8
Ethyl 3-Bromopropionate, 99% (GC) 539-74-2
1-Bromo-3,3-diphenylpropane, 99% 20017-68-9
1,2-Dibenzoylbenzene, 97% 1159-86-0
Cibacron brilliant red 3b-a 17681-50-4
2-Ketoglutaric acid,disodium salt, dihydrate, 99% 305-72-6
Methyl octanoate, 99% (gc) 111-11-5
Tungsten Hexacarbonyl, 99% 14040-11-0
n-(Trimethylsilyl)-imidazole, 98% 18156-74-6
Fluoresceinamine, isomer II 51649-83-3
Ethyl-O-Mesitylsulfonylaceto-Hydroxamate, 99% 38202-27-6
Fast Red Al Salt 16048-40-1
Methyl 4-methoxysalicylate, 98% 5446-02-6
2-Methyl-1,4-naphthoquinone 58-27-5
18 Beta-Glycyrrhetinic Acid, 98+% (Titr., on the Anhydrous Basis) 471-53-4
5-Bromouracil, 98% 51-20-7
2,2-Bis(4-Hydroxy-3-Methylphenylpropane) 79-97-0
Chlorotriethylsilane, 99% 994-30-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net