Search   
MSDS 
:
 Magnesium bromide hexahydrate, p.a.
CAS 
:
 13446-53-2
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13446-53-2 |Magnesium bromide hexahydrate | 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause central
nervous system depression, characterized by excitement, followed by
headache, dizziness, drowsiness, and nausea. Advanced stages may
cause collapse, unconsciousness, coma and possible death due to
respiratory failure.
Inhalation:
May cause respiratory tract irritation. May cause effects similar to
those described for ingestion.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic
inhalation and ingestion may cause effects similar to those of acute
inhalation and ingestion.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Substance is noncombustible.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid breathing dust, vapor, mist, or
gas. Avoid contact with skin and eyes. Keep container tightly
closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 13446-53-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not applicable.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 165 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density: 2.0000g/cm3
Molecular Formula: Br2Mg.6H2O
Molecular Weight: 292.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, hydrochloric acid.
Hazardous Decomposition Products:
Carbon dioxide, hydrogen bromide, oxides of magnesium.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13446-53-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Magnesium bromide hexahydrate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 13446-53-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13446-53-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13446-53-2 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N-Dibutylaniline, 99% (GC) 613-29-6
1,1,1,3,3,3-Hexafluoroacetone sesquihydrate, 98% (gc) 684-16-2
2-Biphenylyl Glycidyl Ether, 95% 7144-65-2
2,4-Dichlorobenzamide, 98% 2447-79-2
Isobutyl methacrylate, 99% (gc), stabilized with 15-20 ppm MEHQ 97-86-9
Picolinic acid n-oxide, 97% 824-40-8
N,n'-dimethylpiperazine, 98% 106-58-1
1,4-Dichlorobutane 110-56-5
1-Acetyl-4-Piperidinecarboxylic Acid, 99% 25503-90-6
Alpha, Alpha, Alpha-Trifluoro-O-Cresol 99% 444-30-4
Trans 2, cis 6-nonadienal diethylacetal, 80% 67674-36-6
Nitronium tetrafluoroborate,97% 13826-86-3
7-Methylindole, 99% 933-67-5
2,3,4,5,6-Pentafluoroaniline, 97% 771-60-8
9-Hydroxyxanthene, 99% 90-46-0
2'-Methoxyacetophenone, 99% 579-74-8
4-Methylindole, 99% 16096-32-5
Benzo[b]naphtho[2,3-d]furan, tech., 90+% (gc) 243-42-5
2-Methyl-3-nitrophenol, 98 % 5460-31-1
Diethylcarbamyl chloride, 99% (titr.) 88-10-8
2'-Chloroacetophenone, 97% 2142-68-9
Trifluoromethanesulfonic acid, 99% 1493-13-6
Acid Blue 45 2861-02-1
N-Alpha-Carbobenzyloxy-D-Arginine, 99+% 6382-93-0
1,2,7,8-Diepoxyoctane, 97% 2426-07-5
Tetrachlorophthalic anhydride, 98% (contains 0.5% Hexachlorobenzene) 117-08-8
4-Hydroxy-N-Methylpiperidine, 98% 106-52-5
Methyl 2,4-dihydroxybenzoate, 97% 2150-47-2
Calmagite, Indicator Grade 3147-14-6
Magnesium bromide hexahydrate, p.a. 13446-53-2
1,5-Naphthalenedisulfonic Acid Disodium Salt, Monohydrate, 95% 1655-29-4
(S)-(+)-2-Amino-2-Methylbutanedioic Acid, 99% 0-00-1
1-Hexanethiol, 99% (GC) 111-31-9
3-Fluorocinnamic Acid 458-46-8
1-Methyl-1-cyclohexanecarboxylic acid, 99% 1123-25-7
1,2-Ethanedisulfonic Acid Disodium Salt 5325-43-9
2-Aminopyrimidine (Pract) 109-12-6
Copper(II) trifluoromethanesulfonate 34946-82-2
4-Nitrobenzenediazonium tetrafluoroborate (pract), 95% (uv-vis) 456-27-9
D-(-)-Gulose, 93-95%, mixture of anomers 4205-23-6
3-Acetoxyacetophenone, 99% 2454-35-5
1-Hydroxy-2,2,5,5-tetramethyl-3-imidazoline 3-oxide, 99% 33455-68-4
(S)-(+)-Glycidyl nosylate, 98% 115314-14-2
2,5-Diaminobenzenesulfonic Acid, Tech. 90% 88-45-9
Selenium atomic absorption standard solution, 1 mg/ml se in 10% hcl 7647-01-0
6-Quinolinecarboxylic Acid, 98% (Titr.) 10349-57-2
2,2-Diphenylpropionic Acid, 97% 5558-66-7
4-Aminoantipyrine 83-07-8
Methyl 3,5-Dimethoxybenzoate, 99% 2150-37-0
N,2,3-Trimethyl-2-Isopropylbutamide 51115-67-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net