Search   
MSDS 
:
 Nitronium tetrafluoroborate,97%
CAS 
:
 13826-86-3
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13826-86-3 |Nitronium tetrafluoroborate, 97% | 97% | 237-533-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye burns. May cause irreversible eye injury.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Irritation may lead to chemical pneumonitis and pulmonary edema.
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Decomposes at high temperatures, resulting in toxic
and corrosive products.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Flush spill area with water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Do not get in eyes, on skin, or on
clothing. Do not ingest or inhale. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep under a nitrogen blanket. Keep refrigerated. (Store below
4C/39F.) Keep away from acids.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 13826-86-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: colorless or white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: @ 760.00mm Hg
Freezing/Melting Point: 260 deg C dec
Autoignition Temperature: Not available.
Flash Point: 200 deg C ( 392.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 200 deg C
Solubility in water: may decompose
Specific Gravity/Density:
Molecular Formula: BF4NO2
Molecular Weight: 132.81

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Moist air or water, heat, strong acids
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide,
hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13826-86-3: QX8620000
LD50/LC50:
Not available.
Carcinogenicity:
Nitronium tetrafluoroborate, 97% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 13826-86-3: No information available.
Canada
CAS# 13826-86-3 is listed on Canada's NDSL List.
CAS# 13826-86-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13826-86-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N-Dibutylaniline, 99% (GC) 613-29-6
1,1,1,3,3,3-Hexafluoroacetone sesquihydrate, 98% (gc) 684-16-2
2-Biphenylyl Glycidyl Ether, 95% 7144-65-2
2,4-Dichlorobenzamide, 98% 2447-79-2
Isobutyl methacrylate, 99% (gc), stabilized with 15-20 ppm MEHQ 97-86-9
Picolinic acid n-oxide, 97% 824-40-8
N,n'-dimethylpiperazine, 98% 106-58-1
1,4-Dichlorobutane 110-56-5
1-Acetyl-4-Piperidinecarboxylic Acid, 99% 25503-90-6
Alpha, Alpha, Alpha-Trifluoro-O-Cresol 99% 444-30-4
Trans 2, cis 6-nonadienal diethylacetal, 80% 67674-36-6
Nitronium tetrafluoroborate,97% 13826-86-3
7-Methylindole, 99% 933-67-5
2,3,4,5,6-Pentafluoroaniline, 97% 771-60-8
9-Hydroxyxanthene, 99% 90-46-0
2'-Methoxyacetophenone, 99% 579-74-8
4-Methylindole, 99% 16096-32-5
Benzo[b]naphtho[2,3-d]furan, tech., 90+% (gc) 243-42-5
2-Methyl-3-nitrophenol, 98 % 5460-31-1
Diethylcarbamyl chloride, 99% (titr.) 88-10-8
2'-Chloroacetophenone, 97% 2142-68-9
Trifluoromethanesulfonic acid, 99% 1493-13-6
Acid Blue 45 2861-02-1
N-Alpha-Carbobenzyloxy-D-Arginine, 99+% 6382-93-0
1,2,7,8-Diepoxyoctane, 97% 2426-07-5
Tetrachlorophthalic anhydride, 98% (contains 0.5% Hexachlorobenzene) 117-08-8
4-Hydroxy-N-Methylpiperidine, 98% 106-52-5
Methyl 2,4-dihydroxybenzoate, 97% 2150-47-2
Calmagite, Indicator Grade 3147-14-6
Magnesium bromide hexahydrate, p.a. 13446-53-2
1,5-Naphthalenedisulfonic Acid Disodium Salt, Monohydrate, 95% 1655-29-4
(S)-(+)-2-Amino-2-Methylbutanedioic Acid, 99% 0-00-1
1-Hexanethiol, 99% (GC) 111-31-9
3-Fluorocinnamic Acid 458-46-8
1-Methyl-1-cyclohexanecarboxylic acid, 99% 1123-25-7
1,2-Ethanedisulfonic Acid Disodium Salt 5325-43-9
2-Aminopyrimidine (Pract) 109-12-6
Copper(II) trifluoromethanesulfonate 34946-82-2
4-Nitrobenzenediazonium tetrafluoroborate (pract), 95% (uv-vis) 456-27-9
D-(-)-Gulose, 93-95%, mixture of anomers 4205-23-6
3-Acetoxyacetophenone, 99% 2454-35-5
1-Hydroxy-2,2,5,5-tetramethyl-3-imidazoline 3-oxide, 99% 33455-68-4
(S)-(+)-Glycidyl nosylate, 98% 115314-14-2
2,5-Diaminobenzenesulfonic Acid, Tech. 90% 88-45-9
Selenium atomic absorption standard solution, 1 mg/ml se in 10% hcl 7647-01-0
6-Quinolinecarboxylic Acid, 98% (Titr.) 10349-57-2
2,2-Diphenylpropionic Acid, 97% 5558-66-7
4-Aminoantipyrine 83-07-8
Methyl 3,5-Dimethoxybenzoate, 99% 2150-37-0
N,2,3-Trimethyl-2-Isopropylbutamide 51115-67-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net