**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1493-13-6 |Trifluoromethanesulfonic acid | 99% | 216-087-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 35
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes severe burns.The toxicological properties of this material
have not been fully investigated.Hygroscopic (absorbs moisture from
the air).Corrosive.
Potential Health Effects
Eye:
Causes severe eye burns. May cause blindness.
Skin:
Causes severe burns with delayed tissue destruction.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately. Wash mouth out
with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Do
not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin,
or on clothing.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep under a nitrogen blanket. Corrosives area. Keep refrigerated.
(Store below 4C/39F.)
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1493-13-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear very light yellow
Odor: Strong pungent odor.
pH: Not available.
Vapor Pressure: 10 hPa @ 55 deg C
Viscosity: 2.87 cP 25 deg C
Boiling Point: 162 deg C @ 760.00mm Hg
Freezing/Melting Point: -40 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: 1.6960g/cm3
Molecular Formula: CHF3O3S
Molecular Weight: 150.07
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1493-13-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Trifluoromethanesulfonic acid -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Ecotoxicity:
Chemical Oxygen Demand (COD) < 36 mg/kg
20-Day Biochemical Oxygen
Demand of neutralized product < 72 mg/kg
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 35 Causes severe burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1493-13-6: 2
Canada
CAS# 1493-13-6 is listed on Canada's DSL List.
CAS# 1493-13-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1493-13-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
N,N-Dibutylaniline, 99% (GC)
| 613-29-6 |
|
1,1,1,3,3,3-Hexafluoroacetone sesquihydrate, 98% (gc)
| 684-16-2 |
|
2-Biphenylyl Glycidyl Ether, 95%
| 7144-65-2 |
|
2,4-Dichlorobenzamide, 98%
| 2447-79-2 |
|
Isobutyl methacrylate, 99% (gc), stabilized with 15-20 ppm MEHQ
| 97-86-9 |
|
Picolinic acid n-oxide, 97%
| 824-40-8 |
|
N,n'-dimethylpiperazine, 98%
| 106-58-1 |
|
1,4-Dichlorobutane
| 110-56-5 |
|
1-Acetyl-4-Piperidinecarboxylic Acid, 99%
| 25503-90-6 |
|
Alpha, Alpha, Alpha-Trifluoro-O-Cresol 99%
| 444-30-4 |
|
Trans 2, cis 6-nonadienal diethylacetal, 80%
| 67674-36-6 |
|
Nitronium tetrafluoroborate,97%
| 13826-86-3 |
|
7-Methylindole, 99%
| 933-67-5 |
|
2,3,4,5,6-Pentafluoroaniline, 97%
| 771-60-8 |
|
9-Hydroxyxanthene, 99%
| 90-46-0 |
|
2'-Methoxyacetophenone, 99%
| 579-74-8 |
|
4-Methylindole, 99%
| 16096-32-5 |
|
Benzo[b]naphtho[2,3-d]furan, tech., 90+% (gc)
| 243-42-5 |
|
2-Methyl-3-nitrophenol, 98 %
| 5460-31-1 |
|
Diethylcarbamyl chloride, 99% (titr.)
| 88-10-8 |
|
2'-Chloroacetophenone, 97%
| 2142-68-9 |
|
Trifluoromethanesulfonic acid, 99%
| 1493-13-6 |
|
Acid Blue 45
| 2861-02-1 |
|
N-Alpha-Carbobenzyloxy-D-Arginine, 99+%
| 6382-93-0 |
|
1,2,7,8-Diepoxyoctane, 97%
| 2426-07-5 |
|
Tetrachlorophthalic anhydride, 98% (contains 0.5% Hexachlorobenzene)
| 117-08-8 |
|
4-Hydroxy-N-Methylpiperidine, 98%
| 106-52-5 |
|
Methyl 2,4-dihydroxybenzoate, 97%
| 2150-47-2 |
|
Calmagite, Indicator Grade
| 3147-14-6 |
|
Magnesium bromide hexahydrate, p.a.
| 13446-53-2 |
|
1,5-Naphthalenedisulfonic Acid Disodium Salt, Monohydrate, 95%
| 1655-29-4 |
|
(S)-(+)-2-Amino-2-Methylbutanedioic Acid, 99%
| 0-00-1 |
|
1-Hexanethiol, 99% (GC)
| 111-31-9 |
|
3-Fluorocinnamic Acid
| 458-46-8 |
|
1-Methyl-1-cyclohexanecarboxylic acid, 99%
| 1123-25-7 |
|
1,2-Ethanedisulfonic Acid Disodium Salt
| 5325-43-9 |
|
2-Aminopyrimidine (Pract)
| 109-12-6 |
|
Copper(II) trifluoromethanesulfonate
| 34946-82-2 |
|
4-Nitrobenzenediazonium tetrafluoroborate (pract), 95% (uv-vis)
| 456-27-9 |
|
D-(-)-Gulose, 93-95%, mixture of anomers
| 4205-23-6 |
|
3-Acetoxyacetophenone, 99%
| 2454-35-5 |
|
1-Hydroxy-2,2,5,5-tetramethyl-3-imidazoline 3-oxide, 99%
| 33455-68-4 |
|
(S)-(+)-Glycidyl nosylate, 98%
| 115314-14-2 |
|
2,5-Diaminobenzenesulfonic Acid, Tech. 90%
| 88-45-9 |
|
Selenium atomic absorption standard solution, 1 mg/ml se in 10% hcl
| 7647-01-0 |
|
6-Quinolinecarboxylic Acid, 98% (Titr.)
| 10349-57-2 |
|
2,2-Diphenylpropionic Acid, 97%
| 5558-66-7 |
|
4-Aminoantipyrine
| 83-07-8 |
|
Methyl 3,5-Dimethoxybenzoate, 99%
| 2150-37-0 |
|
N,2,3-Trimethyl-2-Isopropylbutamide
| 51115-67-4 |
|
|