Search   
MSDS 
:
 Copper(II) trifluoromethanesulfonate
CAS 
:
 34946-82-2
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 34946-82-2 |Copper (II) trifluoromethanesulfonate | >99 | 252-300-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.The toxicological properties of this
material have not been fully investigated.Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Keep container tightly closed. Do not
get on skin or in eyes. Do not ingest or inhale. Discard contaminated
shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 34946-82-2:
United Kingdom, WEL - TWA: (listed as copper): 0.2 mg/m3 TWA (fum
1 mg/m3 TWA (dust and mist)
United Kingdom, WEL - STEL: (listed as copper): 0.6 mg/m3 STEL
(fume); 2 mg/m3 STEL (dust and mist)
United States OSHA: 0.1 mg/m3 TWA (fume); 1 mg/m3 TWA (dusts and
mists) (listed under Copper).
Belgium - TWA: (listed as copper): 0.2 mg/m3 VLE (fume); 1 mg/m3
(dust and mist)
France - VME: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 V
(dust, as Cu)
France - VLE: (listed as copper): 2 mg/m3 VLE (dust, as Cu)
Germany: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 VME (d
as Cu)
Malaysia: (listed as copper): 0.2 mg/m3 TWA (fume, as Cu); 1 mg/m
TWA (dust and mist, as Cu)
Netherlands: (listed as copper): 0.2 mg/m3 MAC (smoke); 1 mg/m3 M
(dust)
Russia: (listed as copper): 1 mg/m3 TWA (dust)
Russia: (listed as copper): 0.5 mg/m3 STEL (dust)
Spain: (listed as copper): 0.2 mg/m3 VLA-ED (fume); 1 mg/m3 VLA-E
(dust and mist, as Cu)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C2F6S2O6Cu
Molecular Weight: 361.69

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May decompose on
exposure to moist air or water.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 34946-82-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Copper (II) trifluoromethanesulfonate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 34946-82-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 34946-82-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 34946-82-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/08/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N-Dibutylaniline, 99% (GC) 613-29-6
1,1,1,3,3,3-Hexafluoroacetone sesquihydrate, 98% (gc) 684-16-2
2-Biphenylyl Glycidyl Ether, 95% 7144-65-2
2,4-Dichlorobenzamide, 98% 2447-79-2
Isobutyl methacrylate, 99% (gc), stabilized with 15-20 ppm MEHQ 97-86-9
Picolinic acid n-oxide, 97% 824-40-8
N,n'-dimethylpiperazine, 98% 106-58-1
1,4-Dichlorobutane 110-56-5
1-Acetyl-4-Piperidinecarboxylic Acid, 99% 25503-90-6
Alpha, Alpha, Alpha-Trifluoro-O-Cresol 99% 444-30-4
Trans 2, cis 6-nonadienal diethylacetal, 80% 67674-36-6
Nitronium tetrafluoroborate,97% 13826-86-3
7-Methylindole, 99% 933-67-5
2,3,4,5,6-Pentafluoroaniline, 97% 771-60-8
9-Hydroxyxanthene, 99% 90-46-0
2'-Methoxyacetophenone, 99% 579-74-8
4-Methylindole, 99% 16096-32-5
Benzo[b]naphtho[2,3-d]furan, tech., 90+% (gc) 243-42-5
2-Methyl-3-nitrophenol, 98 % 5460-31-1
Diethylcarbamyl chloride, 99% (titr.) 88-10-8
2'-Chloroacetophenone, 97% 2142-68-9
Trifluoromethanesulfonic acid, 99% 1493-13-6
Acid Blue 45 2861-02-1
N-Alpha-Carbobenzyloxy-D-Arginine, 99+% 6382-93-0
1,2,7,8-Diepoxyoctane, 97% 2426-07-5
Tetrachlorophthalic anhydride, 98% (contains 0.5% Hexachlorobenzene) 117-08-8
4-Hydroxy-N-Methylpiperidine, 98% 106-52-5
Methyl 2,4-dihydroxybenzoate, 97% 2150-47-2
Calmagite, Indicator Grade 3147-14-6
Magnesium bromide hexahydrate, p.a. 13446-53-2
1,5-Naphthalenedisulfonic Acid Disodium Salt, Monohydrate, 95% 1655-29-4
(S)-(+)-2-Amino-2-Methylbutanedioic Acid, 99% 0-00-1
1-Hexanethiol, 99% (GC) 111-31-9
3-Fluorocinnamic Acid 458-46-8
1-Methyl-1-cyclohexanecarboxylic acid, 99% 1123-25-7
1,2-Ethanedisulfonic Acid Disodium Salt 5325-43-9
2-Aminopyrimidine (Pract) 109-12-6
Copper(II) trifluoromethanesulfonate 34946-82-2
4-Nitrobenzenediazonium tetrafluoroborate (pract), 95% (uv-vis) 456-27-9
D-(-)-Gulose, 93-95%, mixture of anomers 4205-23-6
3-Acetoxyacetophenone, 99% 2454-35-5
1-Hydroxy-2,2,5,5-tetramethyl-3-imidazoline 3-oxide, 99% 33455-68-4
(S)-(+)-Glycidyl nosylate, 98% 115314-14-2
2,5-Diaminobenzenesulfonic Acid, Tech. 90% 88-45-9
Selenium atomic absorption standard solution, 1 mg/ml se in 10% hcl 7647-01-0
6-Quinolinecarboxylic Acid, 98% (Titr.) 10349-57-2
2,2-Diphenylpropionic Acid, 97% 5558-66-7
4-Aminoantipyrine 83-07-8
Methyl 3,5-Dimethoxybenzoate, 99% 2150-37-0
N,2,3-Trimethyl-2-Isopropylbutamide 51115-67-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net