Search   
MSDS 
:
 1,2-Ethanedisulfonic Acid Disodium Salt
CAS 
:
 5325-43-9
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5325-43-9 |1,2-Ethanedisulfonic Acid, Disodium Sa| ca 100 | 226-198-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5325-43-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density:
Molecular Formula: C2H4Na2O6S2
Molecular Weight: 234.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide, sodium oxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5325-43-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,2-Ethanedisulfonic Acid, Disodium Salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 5325-43-9: No information available.
Canada
CAS# 5325-43-9 is listed on Canada's NDSL List.
CAS# 5325-43-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5325-43-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/15/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N,N-Dibutylaniline, 99% (GC) 613-29-6
1,1,1,3,3,3-Hexafluoroacetone sesquihydrate, 98% (gc) 684-16-2
2-Biphenylyl Glycidyl Ether, 95% 7144-65-2
2,4-Dichlorobenzamide, 98% 2447-79-2
Isobutyl methacrylate, 99% (gc), stabilized with 15-20 ppm MEHQ 97-86-9
Picolinic acid n-oxide, 97% 824-40-8
N,n'-dimethylpiperazine, 98% 106-58-1
1,4-Dichlorobutane 110-56-5
1-Acetyl-4-Piperidinecarboxylic Acid, 99% 25503-90-6
Alpha, Alpha, Alpha-Trifluoro-O-Cresol 99% 444-30-4
Trans 2, cis 6-nonadienal diethylacetal, 80% 67674-36-6
Nitronium tetrafluoroborate,97% 13826-86-3
7-Methylindole, 99% 933-67-5
2,3,4,5,6-Pentafluoroaniline, 97% 771-60-8
9-Hydroxyxanthene, 99% 90-46-0
2'-Methoxyacetophenone, 99% 579-74-8
4-Methylindole, 99% 16096-32-5
Benzo[b]naphtho[2,3-d]furan, tech., 90+% (gc) 243-42-5
2-Methyl-3-nitrophenol, 98 % 5460-31-1
Diethylcarbamyl chloride, 99% (titr.) 88-10-8
2'-Chloroacetophenone, 97% 2142-68-9
Trifluoromethanesulfonic acid, 99% 1493-13-6
Acid Blue 45 2861-02-1
N-Alpha-Carbobenzyloxy-D-Arginine, 99+% 6382-93-0
1,2,7,8-Diepoxyoctane, 97% 2426-07-5
Tetrachlorophthalic anhydride, 98% (contains 0.5% Hexachlorobenzene) 117-08-8
4-Hydroxy-N-Methylpiperidine, 98% 106-52-5
Methyl 2,4-dihydroxybenzoate, 97% 2150-47-2
Calmagite, Indicator Grade 3147-14-6
Magnesium bromide hexahydrate, p.a. 13446-53-2
1,5-Naphthalenedisulfonic Acid Disodium Salt, Monohydrate, 95% 1655-29-4
(S)-(+)-2-Amino-2-Methylbutanedioic Acid, 99% 0-00-1
1-Hexanethiol, 99% (GC) 111-31-9
3-Fluorocinnamic Acid 458-46-8
1-Methyl-1-cyclohexanecarboxylic acid, 99% 1123-25-7
1,2-Ethanedisulfonic Acid Disodium Salt 5325-43-9
2-Aminopyrimidine (Pract) 109-12-6
Copper(II) trifluoromethanesulfonate 34946-82-2
4-Nitrobenzenediazonium tetrafluoroborate (pract), 95% (uv-vis) 456-27-9
D-(-)-Gulose, 93-95%, mixture of anomers 4205-23-6
3-Acetoxyacetophenone, 99% 2454-35-5
1-Hydroxy-2,2,5,5-tetramethyl-3-imidazoline 3-oxide, 99% 33455-68-4
(S)-(+)-Glycidyl nosylate, 98% 115314-14-2
2,5-Diaminobenzenesulfonic Acid, Tech. 90% 88-45-9
Selenium atomic absorption standard solution, 1 mg/ml se in 10% hcl 7647-01-0
6-Quinolinecarboxylic Acid, 98% (Titr.) 10349-57-2
2,2-Diphenylpropionic Acid, 97% 5558-66-7
4-Aminoantipyrine 83-07-8
Methyl 3,5-Dimethoxybenzoate, 99% 2150-37-0
N,2,3-Trimethyl-2-Isopropylbutamide 51115-67-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net