Search   
MSDS 
:
 Dibenzoyl-d-tartaric acid
CAS 
:
 17026-42-5
SYNONYMS 
:
 2,3-Dibenzoyloxysuccinic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 17026-42-5 |Dibenzoyl-D-tartaric acid | ca. 100 | 241-097-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Causes moderate eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Sweep up or absorb material, then
place into a suitable clean, dry, closed container for disposal.
Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 17026-42-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white or yellow
Odor: Odorless.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 154 - 156 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C18H14O8
Molecular Weight: 358.31

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 17026-42-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Dibenzoyl-D-tartaric acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 17026-42-5: No information available.
Canada
CAS# 17026-42-5 is listed on Canada's NDSL List.
CAS# 17026-42-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 17026-42-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/02/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Di-tert.butyl-4-methylphenol, 128-37-0
Sodium Hydride, 60% Dispersion in Mineral Oil, DMF Soluble Bags 7646-69-7
1,1,1-Trichloroacetone 918-00-3
(m-methoxyphenyl)acetonitrile, 97% 19924-43-7
Tributylpropynylstannane 64099-82-7
Diethylenetriamine-n,n,n',n',n'',n''-penta acetic dianhydride 23911-26-4
N-boc-l-1,2,3,4-tetrahydro-beta-carboline- 3-carboxylic acid
D-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid Hydrochloride 41220-48-8
2-Tert-Butylcyclohexanone, 97% 1728-46-7
L-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid Hydrochloride 77497-95-1
4-Chloro-3-Methylphenol, 99% 59-50-7
N-boc-l-1,2,3,4-tetrahydroisoquinoline-3-c arboxylic acid
N-FMOC-l-1,2,3,4-Tetrahydroisoquinoline-3- Carboxylic Acid 136030-33-6
N,n,2-trimethylpropionamide, 99% 21678-37-5
5-Amino-3-Phenyl-1,2,4-Thiadiazole, 99% 17467-15-1
4,6-Dimethyldibenzothiophene, 95% (gc)
[(2-Chloroethyl)thio]benzene 5535-49-9
2,2-Dichlorocyclopropyl phenyl sulfide 63289-85-0
2,2-Dichlorocyclopropyl phenyl sulfone 38435-04-0
1-TOSYL-4-PHENYL-4-CARBOXY PIPERIDINE 50-00-0
(+)-[(8,8-Dichlorocamphoryl)sulfonyl]oxazi ridine 127184-05-8
(-)-[(8,8-Dichlorocamphoryl)sulfonyl]oxazi ridine 139628-16-3
Dl-3-aminoisobutyric acid monohydrate, 99%
4-Phenyl-1-Butanol, 97% 3360-41-6
Potassium deuteroxide, 30 wt% solution in D2O 7789-20-0
5-tert.-Butyl-4-hydroxy-2-methylphenyl sulfide 96-69-5
Pyridinium fluorochromate 83042-08-4
5-beta-Cholestan 481-20-9
Dibenzoyl-d-tartaric acid 17026-42-5
Doyle dirhodium catalyst - RH2(5R-MEPY)4 67-63-0
Doyle dirhodium catalyst - RH2(5S-MEPY)4 67-63-0
Doyle dirhodium catalyst - rh2(4s-meox)4 167693-36-9
Doyle dirhodium catalyst - RH2(4S-MPPIM)4 75-05-8
Doyle dirhodium catalyst - rh2(capy)4 138984-26-6
Dibromoacetonitrile, 97+% 3252-43-5
Octyl Sodium Sulfate, HPLC Grade, 94% (Titr.) 142-31-4
Isobutyl vinyl ether, 99.5% (gc), stabilized with 0.1% potassium 109-53-5
Potassium hydroxide, 50 wt% aqueous solution 1310-58-3
Potassium hydroxide, 10 wt% aqueous soluti on 1310-58-3
Potassium hydroxide, 30 wt% aqueous solution 1310-58-3
Dl-aspartic acid k-mg salt
1-Chloro-N,N,2-trimethylpropenylamine, 98.5+% (GC) 26189-59-3
Isosorbide-2-mononitrate 16106-20-0
1,2-Dichloroethylene, 99%, mixture of isomers 540-59-0
cis-1,2-Dichloroethylene, 97% 156-59-2
2-Methylaminophenol, 97+% 611-24-5
Hydrogen Peroxide, 50 wt% Solution in Water 7722-84-1
Ammonium Hydroxide, 25% Solution in Water, C.P. 1336-21-6
N-(1-Naphthyl)ethylenediamine Dihydrochloride, P.A. 1465-25-4
N-Ethyl-Beta-Alaninenitrile 21539-47-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net