Search   
MSDS 
:
 1-Chloro-N,N,2-trimethylpropenylamine, 98.5+% (GC)
CAS 
:
 26189-59-3
SYNONYMS 
:
 Tetramethyl-Alpha-Chloroenamine; TMCE;     (1-Chloro-2-Methylpropenyl)Dimethylamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 26189-59-3 |1-Chloro-N,N,2-trimethylpropenylamine | >98.5 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Causes burns.Moisture sensitive.Corrosive.Lachrymator
(substance which increases the flow of tears).Light sensitive.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation of vapors
at high concentrations may cause difficulty breathing and pulmonary
edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Will burn if
involved in a fire. Use water spray to keep fire-exposed containers
cool. Flammable liquid and vapor. Containers may explode when
heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Do not get in eyes, on skin, or on clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Do not ingest or inhale.
Use only in a chemical fume hood. Discard contaminated shoes. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames. Keep from contact with
moist air and steam. Keep away from heat, sparks and flame.
Storage:
Keep away from heat, sparks, and flame. Keep under an argon blanket.
Flammables-area. Deep freeze (below -20C). Keep containers tightly
closed. Store protected from moisture. Store protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 26189-59-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to yellow
Odor: Stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 129 - 130 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 80.6 deg F ( 27.00 deg C)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0100g/cm3
Molecular Formula: C6H12ClN
Molecular Weight: 133.62

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
May polymerize on exposure to light. Moisture sensitive.
Conditions to Avoid:
Light, ignition sources, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, strong bases, polymerizing
initiators.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 26189-59-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Chloro-N,N,2-trimethylpropenylamine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.*
Hazard Class: 8
UN Number: 2734
Packing Group: II
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2734
Packing Group: II
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2734
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 25 Avoid contact with eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 43 In case of fire, use ... (indicate in the space
the precise type of fire-fighting equipment. If water
increases the risk, add - never use water).
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 26189-59-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 26189-59-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 26189-59-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/12/1998 Revision #6 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Di-tert.butyl-4-methylphenol, 128-37-0
Sodium Hydride, 60% Dispersion in Mineral Oil, DMF Soluble Bags 7646-69-7
1,1,1-Trichloroacetone 918-00-3
(m-methoxyphenyl)acetonitrile, 97% 19924-43-7
Tributylpropynylstannane 64099-82-7
Diethylenetriamine-n,n,n',n',n'',n''-penta acetic dianhydride 23911-26-4
N-boc-l-1,2,3,4-tetrahydro-beta-carboline- 3-carboxylic acid
D-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid Hydrochloride 41220-48-8
2-Tert-Butylcyclohexanone, 97% 1728-46-7
L-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid Hydrochloride 77497-95-1
4-Chloro-3-Methylphenol, 99% 59-50-7
N-boc-l-1,2,3,4-tetrahydroisoquinoline-3-c arboxylic acid
N-FMOC-l-1,2,3,4-Tetrahydroisoquinoline-3- Carboxylic Acid 136030-33-6
N,n,2-trimethylpropionamide, 99% 21678-37-5
5-Amino-3-Phenyl-1,2,4-Thiadiazole, 99% 17467-15-1
4,6-Dimethyldibenzothiophene, 95% (gc)
[(2-Chloroethyl)thio]benzene 5535-49-9
2,2-Dichlorocyclopropyl phenyl sulfide 63289-85-0
2,2-Dichlorocyclopropyl phenyl sulfone 38435-04-0
1-TOSYL-4-PHENYL-4-CARBOXY PIPERIDINE 50-00-0
(+)-[(8,8-Dichlorocamphoryl)sulfonyl]oxazi ridine 127184-05-8
(-)-[(8,8-Dichlorocamphoryl)sulfonyl]oxazi ridine 139628-16-3
Dl-3-aminoisobutyric acid monohydrate, 99%
4-Phenyl-1-Butanol, 97% 3360-41-6
Potassium deuteroxide, 30 wt% solution in D2O 7789-20-0
5-tert.-Butyl-4-hydroxy-2-methylphenyl sulfide 96-69-5
Pyridinium fluorochromate 83042-08-4
5-beta-Cholestan 481-20-9
Dibenzoyl-d-tartaric acid 17026-42-5
Doyle dirhodium catalyst - RH2(5R-MEPY)4 67-63-0
Doyle dirhodium catalyst - RH2(5S-MEPY)4 67-63-0
Doyle dirhodium catalyst - rh2(4s-meox)4 167693-36-9
Doyle dirhodium catalyst - RH2(4S-MPPIM)4 75-05-8
Doyle dirhodium catalyst - rh2(capy)4 138984-26-6
Dibromoacetonitrile, 97+% 3252-43-5
Octyl Sodium Sulfate, HPLC Grade, 94% (Titr.) 142-31-4
Isobutyl vinyl ether, 99.5% (gc), stabilized with 0.1% potassium 109-53-5
Potassium hydroxide, 50 wt% aqueous solution 1310-58-3
Potassium hydroxide, 10 wt% aqueous soluti on 1310-58-3
Potassium hydroxide, 30 wt% aqueous solution 1310-58-3
Dl-aspartic acid k-mg salt
1-Chloro-N,N,2-trimethylpropenylamine, 98.5+% (GC) 26189-59-3
Isosorbide-2-mononitrate 16106-20-0
1,2-Dichloroethylene, 99%, mixture of isomers 540-59-0
cis-1,2-Dichloroethylene, 97% 156-59-2
2-Methylaminophenol, 97+% 611-24-5
Hydrogen Peroxide, 50 wt% Solution in Water 7722-84-1
Ammonium Hydroxide, 25% Solution in Water, C.P. 1336-21-6
N-(1-Naphthyl)ethylenediamine Dihydrochloride, P.A. 1465-25-4
N-Ethyl-Beta-Alaninenitrile 21539-47-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net