**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5535-49-9 |[(2-Chloroethyl)thio]benzene | ca. 100 | 226-891-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully
investigated.Hygroscopic (absorbs moisture from the air).Moisture
sensitive.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Avoid breathing dust, vapor, mist,
or gas. Avoid contact with eyes, skin, and clothing. Keep container
tightly closed. Avoid ingestion and inhalation. Use only in a
chemical fume hood.
Storage:
Store in a tightly closed container. Keep under a nitrogen blanket.
Store in a cool, dry, well-ventilated area away from incompatible
substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5535-49-9:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: Not available.
Odor: Stench.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 245 - 247 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 104 deg C ( 219.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1740g/cm3
Molecular Formula: C8H9ClS
Molecular Weight: 172.68
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 5535-49-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
[(2-Chloroethyl)thio]benzene -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 5535-49-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5535-49-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5535-49-9 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 3/01/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2,6-Di-tert.butyl-4-methylphenol,
| 128-37-0 |
|
Sodium Hydride, 60% Dispersion in Mineral Oil, DMF Soluble Bags
| 7646-69-7 |
|
1,1,1-Trichloroacetone
| 918-00-3 |
|
(m-methoxyphenyl)acetonitrile, 97%
| 19924-43-7 |
|
Tributylpropynylstannane
| 64099-82-7 |
|
Diethylenetriamine-n,n,n',n',n'',n''-penta acetic dianhydride
| 23911-26-4 |
|
N-boc-l-1,2,3,4-tetrahydro-beta-carboline- 3-carboxylic acid
| |
|
D-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid Hydrochloride
| 41220-48-8 |
|
2-Tert-Butylcyclohexanone, 97%
| 1728-46-7 |
|
L-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid Hydrochloride
| 77497-95-1 |
|
4-Chloro-3-Methylphenol, 99%
| 59-50-7 |
|
N-boc-l-1,2,3,4-tetrahydroisoquinoline-3-c arboxylic acid
| |
|
N-FMOC-l-1,2,3,4-Tetrahydroisoquinoline-3- Carboxylic Acid
| 136030-33-6 |
|
N,n,2-trimethylpropionamide, 99%
| 21678-37-5 |
|
5-Amino-3-Phenyl-1,2,4-Thiadiazole, 99%
| 17467-15-1 |
|
4,6-Dimethyldibenzothiophene, 95% (gc)
| |
|
[(2-Chloroethyl)thio]benzene
| 5535-49-9 |
|
2,2-Dichlorocyclopropyl phenyl sulfide
| 63289-85-0 |
|
2,2-Dichlorocyclopropyl phenyl sulfone
| 38435-04-0 |
|
1-TOSYL-4-PHENYL-4-CARBOXY PIPERIDINE
| 50-00-0 |
|
(+)-[(8,8-Dichlorocamphoryl)sulfonyl]oxazi ridine
| 127184-05-8 |
|
(-)-[(8,8-Dichlorocamphoryl)sulfonyl]oxazi ridine
| 139628-16-3 |
|
Dl-3-aminoisobutyric acid monohydrate, 99%
| |
|
4-Phenyl-1-Butanol, 97%
| 3360-41-6 |
|
Potassium deuteroxide, 30 wt% solution in D2O
| 7789-20-0 |
|
5-tert.-Butyl-4-hydroxy-2-methylphenyl sulfide
| 96-69-5 |
|
Pyridinium fluorochromate
| 83042-08-4 |
|
5-beta-Cholestan
| 481-20-9 |
|
Dibenzoyl-d-tartaric acid
| 17026-42-5 |
|
Doyle dirhodium catalyst - RH2(5R-MEPY)4
| 67-63-0 |
|
Doyle dirhodium catalyst - RH2(5S-MEPY)4
| 67-63-0 |
|
Doyle dirhodium catalyst - rh2(4s-meox)4
| 167693-36-9 |
|
Doyle dirhodium catalyst - RH2(4S-MPPIM)4
| 75-05-8 |
|
Doyle dirhodium catalyst - rh2(capy)4
| 138984-26-6 |
|
Dibromoacetonitrile, 97+%
| 3252-43-5 |
|
Octyl Sodium Sulfate, HPLC Grade, 94% (Titr.)
| 142-31-4 |
|
Isobutyl vinyl ether, 99.5% (gc), stabilized with 0.1% potassium
| 109-53-5 |
|
Potassium hydroxide, 50 wt% aqueous solution
| 1310-58-3 |
|
Potassium hydroxide, 10 wt% aqueous soluti on
| 1310-58-3 |
|
Potassium hydroxide, 30 wt% aqueous solution
| 1310-58-3 |
|
Dl-aspartic acid k-mg salt
| |
|
1-Chloro-N,N,2-trimethylpropenylamine, 98.5+% (GC)
| 26189-59-3 |
|
Isosorbide-2-mononitrate
| 16106-20-0 |
|
1,2-Dichloroethylene, 99%, mixture of isomers
| 540-59-0 |
|
cis-1,2-Dichloroethylene, 97%
| 156-59-2 |
|
2-Methylaminophenol, 97+%
| 611-24-5 |
|
Hydrogen Peroxide, 50 wt% Solution in Water
| 7722-84-1 |
|
Ammonium Hydroxide, 25% Solution in Water, C.P.
| 1336-21-6 |
|
N-(1-Naphthyl)ethylenediamine Dihydrochloride, P.A.
| 1465-25-4 |
|
N-Ethyl-Beta-Alaninenitrile
| 21539-47-9 |
|
|