Search   
MSDS 
:
 Potassium deuteroxide, 30 wt% solution in  D2O
CAS 
:
 7789-20-0
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7789-20-0 |Heavy water, D2O | 70 | 232-148-9 |
|----------------|--------------------------------------|----------|-----------|
| 24572-01-8 |Potassium deuteroxide | 30 | 246-324-8 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 22 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes severe burns.Hygroscopic (absorbs
moisture from the air).Corrosive.

Potential Health Effects
Eye:
Causes severe eye burns. May cause irreversible eye injury.
Contact may cause ulceration of the conjunctiva and cornea. Eye
damage may be delayed. Causes redness and pain.
Skin:
May cause deep, penetrating ulcers of the skin. Causes severe burns
with delayed tissue destruction. Causes redness and pain. Effects of
contact may be delayed.
Ingestion:
May cause severe and permanent damage to the digestive tract. May
cause circulatory system failure. May cause perforation of the
digestive tract. Causes severe digestive tract burns with abdominal
pain, vomiting, and possible death.
Inhalation:
Irritation may lead to chemical pneumonitis and pulmonary edema.
Causes severe irritation of upper respiratory tract with coughing,
burns, breathing difficulty, and possible coma. Causes chemical
burns to the respiratory tract. Inhalation may be fatal as a result
of spasm, inflammation, edema of the larynx and bronchi, chemical
pneumonitis and pulmonary edema. Effects of inhalation may be
delayed.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Prolonged
or repeated eye contact may cause conjunctivitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Discard contaminated clothing
in a manner which limits further exposure. Destroy contaminated
shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, or water spray.
For large fires, use dry chemical, carbon dioxide, alcohol-resistant
foam, or water spray. Cool containers with flooding quantities of
water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale. Use with adequate ventilation. Use only in a chemical fume
hood. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Keep under a nitrogen blanket. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7789-20-0:

CAS# 24572-01-8:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.59
Molecular Formula: KDO
Molecular Weight: 57.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Extreme temperatures.
Incompatibilities with Other Materials:
Strong acids.
Hazardous Decomposition Products:
Dipotassium oxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7789-20-0: ZC0230000
CAS# 24572-01-8 unlisted.
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
Heavy water, D2O -
Not listed by ACGIH, IARC, or NTP.
Potassium deuteroxide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: POTASSIUM HYDROXIDE SOLUTION
Hazard Class: 8
UN Number: 1814
Packing Group: II
IMO
Shipping Name: POTASSIUM HYDROXIDE SOLUTION
Hazard Class: 8
UN Number: 1814
Packing Group: II
RID/ADR
Shipping Name: POTASSIUM HYDROXIDE SOLUTION
Hazard Class: 8
UN Number: 1814
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 35 Causes severe burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7789-20-0: No information available.
CAS# 24572-01-8: No information available.
Canada
CAS# 7789-20-0 is listed on Canada's DSL List.
CAS# 7789-20-0 is not listed on Canada's Ingredient Disclosure List.
CAS# 24572-01-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7789-20-0 is listed on the TSCA inventory.
CAS# 24572-01-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 3/02/1999 Revision #3 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Di-tert.butyl-4-methylphenol, 128-37-0
Sodium Hydride, 60% Dispersion in Mineral Oil, DMF Soluble Bags 7646-69-7
1,1,1-Trichloroacetone 918-00-3
(m-methoxyphenyl)acetonitrile, 97% 19924-43-7
Tributylpropynylstannane 64099-82-7
Diethylenetriamine-n,n,n',n',n'',n''-penta acetic dianhydride 23911-26-4
N-boc-l-1,2,3,4-tetrahydro-beta-carboline- 3-carboxylic acid
D-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid Hydrochloride 41220-48-8
2-Tert-Butylcyclohexanone, 97% 1728-46-7
L-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid Hydrochloride 77497-95-1
4-Chloro-3-Methylphenol, 99% 59-50-7
N-boc-l-1,2,3,4-tetrahydroisoquinoline-3-c arboxylic acid
N-FMOC-l-1,2,3,4-Tetrahydroisoquinoline-3- Carboxylic Acid 136030-33-6
N,n,2-trimethylpropionamide, 99% 21678-37-5
5-Amino-3-Phenyl-1,2,4-Thiadiazole, 99% 17467-15-1
4,6-Dimethyldibenzothiophene, 95% (gc)
[(2-Chloroethyl)thio]benzene 5535-49-9
2,2-Dichlorocyclopropyl phenyl sulfide 63289-85-0
2,2-Dichlorocyclopropyl phenyl sulfone 38435-04-0
1-TOSYL-4-PHENYL-4-CARBOXY PIPERIDINE 50-00-0
(+)-[(8,8-Dichlorocamphoryl)sulfonyl]oxazi ridine 127184-05-8
(-)-[(8,8-Dichlorocamphoryl)sulfonyl]oxazi ridine 139628-16-3
Dl-3-aminoisobutyric acid monohydrate, 99%
4-Phenyl-1-Butanol, 97% 3360-41-6
Potassium deuteroxide, 30 wt% solution in D2O 7789-20-0
5-tert.-Butyl-4-hydroxy-2-methylphenyl sulfide 96-69-5
Pyridinium fluorochromate 83042-08-4
5-beta-Cholestan 481-20-9
Dibenzoyl-d-tartaric acid 17026-42-5
Doyle dirhodium catalyst - RH2(5R-MEPY)4 67-63-0
Doyle dirhodium catalyst - RH2(5S-MEPY)4 67-63-0
Doyle dirhodium catalyst - rh2(4s-meox)4 167693-36-9
Doyle dirhodium catalyst - RH2(4S-MPPIM)4 75-05-8
Doyle dirhodium catalyst - rh2(capy)4 138984-26-6
Dibromoacetonitrile, 97+% 3252-43-5
Octyl Sodium Sulfate, HPLC Grade, 94% (Titr.) 142-31-4
Isobutyl vinyl ether, 99.5% (gc), stabilized with 0.1% potassium 109-53-5
Potassium hydroxide, 50 wt% aqueous solution 1310-58-3
Potassium hydroxide, 10 wt% aqueous soluti on 1310-58-3
Potassium hydroxide, 30 wt% aqueous solution 1310-58-3
Dl-aspartic acid k-mg salt
1-Chloro-N,N,2-trimethylpropenylamine, 98.5+% (GC) 26189-59-3
Isosorbide-2-mononitrate 16106-20-0
1,2-Dichloroethylene, 99%, mixture of isomers 540-59-0
cis-1,2-Dichloroethylene, 97% 156-59-2
2-Methylaminophenol, 97+% 611-24-5
Hydrogen Peroxide, 50 wt% Solution in Water 7722-84-1
Ammonium Hydroxide, 25% Solution in Water, C.P. 1336-21-6
N-(1-Naphthyl)ethylenediamine Dihydrochloride, P.A. 1465-25-4
N-Ethyl-Beta-Alaninenitrile 21539-47-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net