INTERNATIONAL PAINT INC -- INTERSHIELD PRORECO 609, PRA 610, CLEAR COAT
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJPTR
MSDS NAME: INTERSHIELD PRORECO 609, PRA 610, CLEAR COAT BASE
Kit Part: Y
Responsible Party
Name: INTERNATIONAL PAINT INC
Address: 6001 ANTOINE DR
City: HOUSTON TX 77091
Info Phone: 800-854-6813
Emergency Phone Number: 800-424-9300
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: INTERNATIONAL PAINT INC
Address: 6001 ANTOINE DR
City: HOUSTON TX 77091
Phone: 800-589-1267/800-854-6813
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Cas: 110-43-0
RTECS #: MJ5075000
Name: METHYL N-AMYL KETONE
% low Wt: 25.
% high Wt: 50.
OSHA PEL: 465 MG/M3;100 PPM
ACGIH TLV: 233 MG/M3;50 PPM
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 108-10-1
RTECS #: SA9275000
Name: 4-METHYL-2-PENTANONE
% low Wt: 1.
% high Wt: 10.
OSHA PEL: 410 MG/M3;100 PPM
ACGIH TLV: 205 MG/M3;50 PPM
ACGIH STEL: 307 MG/M3;75 PPM
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 108-65-6
RTECS #: AI8925000
Name: 1-METHOXY-2-PROPYL ACETATE
% low Wt: 1.
% high Wt: 10.
------------------------------
Cas: 123-86-4
RTECS #: AF7350000
Name: BUTYL ACETATE
% low Wt: 1.
% high Wt: 10.
OSHA PEL: 710 MG/M3;150 PPM
ACGIH TLV: 713 MG/M3;150 PPM
ACGIH STEL: 950 MG/M3;200 PPM
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: INHALATION: CAUSES NOSE AND THROAT IRRITATION.
VAPOR HARMFUL. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS,
HEADACHE OR NAUSEA. EYE CONT: CAUSES IRRITATION. SKIN CONT: CAUSES IRRITA
TION. CAN BE ABSORBED THROUGH THE SKIN. MAY CAUSE ORGAN DAMAGE. INGESTION:
MAY BE FATAL IF SWALLOWED AND MAY CAUSE ORGAN DAMAGE.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
First Aid: GENERAL: IN ALL CASES OF DOUBT, OR WHEN SYMPTOMS PERSIST, SEEK
MEDICAL ATTENTION. NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON. INHAL:
REMOVE TO FRESH AIR. IF DISCOMFORT IS PRESENT/BRTHG IS ABSE NT GET MED ATTN
IMMED. EYE CONT: FLUSH IMMED W/PLENTY OF WATER FOR AT LST 15 MINS UNTIL IRRIT
SUBSIDES. IF IRRIT PERSISTS, GET MED ATTN. SKIN CONT: FLUSH W/LG AMTS OF
WATER. USE SOAP IF AVAIL. REMOVE SEVERELY CONTAMD CLTHG (INCL SHOES) &
WASH BEFORE REUSE . IF IRRIT PERSISTS, GET MED ATTN. INGEST: IF SWALLOWED, DO
NOT INDUCE VOMIT. KEEP AT REST. GET PROMPT MED ATTN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO NOT USE
COMBUSTIBLE MATERIALS SUCH AS SAWDUST. ABSORB SPILL WITH AN INERT MATERIAL
(E.G., DRY SAND/EARTH), THEN PLACE IN CHEMICAL WASTE CONTAINER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Handling And Storage Precautions: KEEP CONTAINER CLOSED. LOOSEN CLOSURE
CAUTIOUSLY BEFORE OPENING. STORE IN A COOL, WELL VENTILATED PLACE AWAY FROM
INCOMPATIBLE MATERIALS. (SEE STABILITY & REACTIVITY SECTION 10). KEEP
AWAY FROM HEAT, SPARKS AND FLAMES.
Other Precautions: PROTECT MATERIAL FROM DIRECT SUNLIGHT. GROUND AND BOND
CONTAINERS WHEN TRANSFERRING MATERIALS. EMPTY CONTAINERS MAY RETAIN HAZARDOUS
PROPERTIES. FOLLOW ALL MSDS/LABEL WARNINGS, EVEN AFTER THE CONTAINE R IS
EMPTIED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: =33.3C, 92.F
Lower Limits: 1%
Extinguishing Media: FLAMMABLE LIQUID - CLASS IC. FOAM, CARBON DIOXIDE, DRY
CHEMICAL.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N). IN THE ABSENCE OF ELECTRICITY, A WATER SPRAY ( A FOG NOZZLE IS
PREFERRED) MAY BE USED TO COOL CONTAINERS.
Unusual Fire/Explosion Hazard: ISOLATE FROM HEAT, SPARKS, ELECTRICAL EQUIPMENT
AND OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
DECOMPOSITION AND COMBUSTION PRODUCTS MAY BE TOXIC.
=======================================================
Control Measures
=======================================================
Respiratory Protection: DO NOT BREATHE VAPORS OR SPRAY MIST. IF YOU EXPERIENCE
EYE WATERING, HEADACHE OR DIZZINESS OR IF AIR MONITORING DEMONSTRATES
VAP/MIST LEVELS ARE ABOVE APPLIC LIMITS, WEAR AN APPROP, PROPERLY FITTED RE
SPIRATOR (NIOSH APPROVED) DURING & AFTER APPLICATION. FOLLOW RESP
MANUFACTURE'S DIRECTIONS FOR RESPIRATOR USE.
Ventilation: PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO: A) KEEP TLV OF
HAZ INGREDS BELOW LIMITS SPECIFIED IN SECTION TWO. (SUPDAT)
Protective Gloves: WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N). AS
NEEDED, USE BODY PROTECTION TO AVOID CONTACT WITH PRODUCT.
Supplemental Safety and Health: VENT: B) REMOVE VOLATILES PRDCED DURING CURE
& DECOMP PRODS PRDCED DURING WELDING/CUTTING ON SURFS COATED W/THIS PROD.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =79.4C, 175.F
B.P. Text: 175F,79.4365C
Vapor Density: HVR/AIR
Spec Gravity: 0.988
Evaporation Rate & Reference: SLOWER/ETHER
Appearance and Odor: LIQUID.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING. FUMES MAY PRODUCE CARBON DIOXIDE AND CARBON
MONOXIDE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.
NOTICE: REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
INTENTION AL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS
MAY BE HARMFUL OR FATAL.
=======================================================
Ecological Information
=======================================================
Ecological: THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT (DEPARTMENT OF TRANSPORTATION): PROPER SHIPPING
NAME: PAINT. HAZARD CLASS: FLAMMABLE LIQUID, 3. UN NUMBER: UN1263. PACKING
GROUP: PACKING GROUP III.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SECTION 302 REPORTABLE INGREDIENTS. 108-10-1 -
4-METHYLPENTAN-2-ONE. 108-65-6 - 1-METHOXY-2-PROPYL ACETATE.
Federal Regulatory Information: TSCA: COMPONENTS OF THIS PRODUCT ARE LISTED ON
THE TSCA INVENTORY.
CERCLA: WE RECOMMEND YOU CONTACT LOCAL AUTHORITIES TO DETERMINE IF THERE MAY BE
OTHER LOCAL REPORTING REQUIREMENTS.
State Regulatory Information: CALIFORNIA PROPOSITION 65: NONE KNOWN UNLESS
SPECIFIED.
=======================================================
Other Information
=======================================================
Other Information: W CLASSIFICATION: CLASS B, DIVISION 3.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INTERSHIELD PRORECO 609, PRA 610, CLEAR COAT BASE
Company: INTERNATIONAL PAINT INC
Street: 6001 ANTOINE DR
City: HOUSTON TX
Zipcode: 77091
Health Emergency Phone: 800-424-9300
Label Required IND: Y
Date Of Label Review: 10/14/1999
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: FLAMMABLE LIQUID - CLASS IC. ACUTE: INHALATION: CAUSES
NOSE AND THROAT IRRITATION. VAPOR HARMFUL. MAY AFFECT THE BRAIN OR NERVOUS
SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. EYE CONT: CAUSES IRRITAT ION.
SKIN CONT: CAUSES IRRITATION. CAN BE ABSORBED THROUGH THE SKIN. MAY CAUSE
ORGAN DAMAGE. INGESTION: MAY BE FATAL IF SWALLOWED AND MAY CAUSE ORGAN
DAMAGE. CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.