INTERNATIONAL PAINT INC -- INTERSHIELD PRORECO 508, MEDIUM BLUE, PRA551
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJPLT
MSDS NAME: INTERSHIELD PRORECO 508, MEDIUM BLUE, PRA551
Responsible Party
Name: INTERNATIONAL PAINT INC
Address: 6001 ANTOINE DR
City: HOUSTON TX 77091
Info Phone: 800-854-6813
Emergency Phone Number: 800-854-6813
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: INTERNATIONAL PAINT INC
Address: 6001 ANTOINE DR
City: HOUSTON TX 77091
Phone: 800-589-1267/800-854-6813
Name: INTERNATIONAL PAINT INC - INTERLUX
Address: 2270 MORRIS AVENUE
City: UNION NJ 07083-0386
Phone: 713-684-1244
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Cas: 110-43-0
RTECS #: MJ5075000
Name: METHYL N-AMYL KETONE
% low Wt: 25.
% high Wt: 50.
OSHA PEL: 465 MG/M3;100 PPM
ACGIH TLV: 233 MG/M3;50 PPM
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 13463-67-7
RTECS #: XR2275000
Name: TITANIUM DIOXIDE
% low Wt: 10.
% high Wt: 25.
OSHA PEL: 15 MG/M3
ACGIH TLV: 10 MG/M3
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 7631-86-9
RTECS #: VV7565000
Name: SILICA 2482, HYDROPHOBIC; (AMORPHOUS SILICA)
% low Wt: 1.
% high Wt: 10.
OSHA PEL: 6 MG/M3 S
ACGIH TLV: 10 MG/M3 S
------------------------------
Cas: 21645-51-2
RTECS #: BD0940000
Name: ALUMINUM HYDROXIDE
% low Wt: 1.
% high Wt: 10.
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: INHALATION: VAPOR HARMFUL. MAY AFFECT THE BRAIN OR
NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES NOSE AND THROAT
IRRITATION. EYE CONT: CAUSES EYE IRRITATION. SKIN CONT: CAUSES SK IN
IRRITATION. CAN BE ABSORBED THROUGH THE SKIN. MAY CAUSE ORGAN DAMAGE.
INGESTION: MAY BE FATAL IF SWALLOWED AND MAY CAUSE ORGAN DAMAGE.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
First Aid: GENERAL: IN ALL CASES OF DOUBT, OR WHEN SYMPS PERSIST, SEEK MED
ATTN. NEVER GIVE ANYTHING BY MOUTH TO UNCON PERSON. INHAL: REMOVE TO FRESH
AIR. IF DISCOMFORT IS PRESENT/BRTHG IS ABSENT GET MED ATTN IM MED. EYE CONT:
FLUSH IMMED W/PLENTY OF WATER FOR AT LST 15 MINS UNTIL IRRIT SUBSIDES. IF
IRRIT PERSISTS, GET MED ATTN. SKIN CONT: FLUSH W/LG AMTS OF WATER. USE SOAP
IF AVAIL. REMOVE SEVERELY CONTAMD C LTHG (INCL SHOES) & WASH BEFORE
REUSE. IF IRRIT PERSISTS, GET MED ATTN. INGEST: IF SWALLOWED, DO NOT INDUCE
VOMIT. KEEP AT REST. GET PROMPT MEDICAL ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO NOT USE
COMBUSTIBLE MATERIALS SUCH AS SAWDUST. ABSORB SPILL W/INERT MATERIAL (E.G.,
DRY SAND OR EARTH), THEN PLACE IN A CHEMICAL WASTE CONTAINER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Handling And Storage Precautions: GENERAL: KEEP CONTAINER CLOSED. LOOSEN
CLOSURE CAUTIOUSLY BEFORE OPENING. STORE IN A COOL, WELL VENTILATED PLACE
AWAY FROM INCOMPATIBLE MATERIALS. (SEE STABILITY AND REACTIVITY (SECTION
10)). KEEP AWA Y FROM HEAT, SPARKS AND FLAMES. PROTECT MATERIAL FROM DIRECT
SUNLIGHT.
Other Precautions: GROUND & BOND CONTAINERS WHEN TRANSFERRING MATERIALS.
EMPTY CONTAINERS MAY RETAIN HAZARDOUS PROPERTIES. FOLLOW ALL MSDS/LABEL
WARNINGS, EVEN AFTER CONTAINER IS EMPTIED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: =37.8C, 100.F
Flash Point Text: 100F,37.774C
Lower Limits: 1%
Extinguishing Media: OSHA CLASSIFICATION: COMBUSTIBLE LIQUID - CLASS II. FOAM,
CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N).
Unusual Fire/Explosion Hazard: ISOLATE FROM HEAT, SPARKS, ELECTRICAL EQUIPMENT
AND OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
IN THE ABSENCE OF ELECTRICITY, A WATER SPRAY (A FOG NOZZLE IS PREFERRED) MAY
BE USED TO COOL CONTAINERS. DECOMPOSITION AND COMBUSTION PRODUCTS MAY BE
TOXIC.
=======================================================
Control Measures
=======================================================
Respiratory Protection: DO NOT BREATHE VAPS/SPRAY MIST. IF YOU EXPERIENCE EYE
WATERING, HEADACHE/DIZZINESS/IF AIR MONITORING DEMONSTRATES VAP/MIST LEVELS
ARE ABOVE APPLIC LIMITS, WEAR APPROP, PROPERLY FITTED RESPIRATOR (NIOS H
APPROVED) DURING & AFTER APPLICATION. FOLLOW RESPIRATOR MANUFACTURER'S
DIRECTIONS FOR RESPIRATOR USE.
Ventilation: PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO: A) KEEP TLV OF
HAZARDOUS INGREDS BELOW LIMITS SPECIFIED IN SECTION TWO. (SUPDAT)
Protective Gloves: WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N). AS
NEEDED, USE BODY PROTECTION TO AVOID CONTACT WITH PRODUCT.
Supplemental Safety and Health: VENT: B) REMOVE VOLATILES PRODUCED DURING CURE
AND DECOMPOSITION PRODUCTS PRODUCED DURING WELDING OR CUTTING ON SURFACE
COATED WITH THIS PRODUCT.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =151.7C, 305.F
B.P. Text: 305F,151.6515C
Vapor Density: HVR/AIR
Spec Gravity: 1.22
Evaporation Rate & Reference: SLOWER/ETHER
Appearance and Odor: LIQUID.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: THIS PRODUCT IS STABLE AND HAZARDOUS
POLYMERIZATION WILL NOT OCCUR.
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING. FUMES MAY PRODUCE CARBON DIOXIDE AND CARBON
MONOXIDE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.
NOTICE: REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
INTENTION AL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS
MAY BE HARMFUL OR FATAL.
=======================================================
Ecological Information
=======================================================
Ecological: THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT (DEPARTMENT OF TRANSPORTATION): PROPER SHIPPING
ANME: PAINT. HAZARD CLASS: FLAMMABLE LIQUID, 3. UN NUMBER: UN1263. PACKING
GROUP: PACKING GROUP III.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SARA TITLE III (SUPERFUND AMENDMENTS AND
REAUTHORIZATION ACT): NONE KNOWN UNLESS CHEMICAL ARE SPECIFIED BELOW. SECTION
302 REPORTABLE INGREDIENTS. 313 REPORTABLE INGREDIENTS. 001344-28-1 ALUMINUM
OXID E.
Federal Regulatory Information: TSCA (TOXIC SUBSTANCE CONTROL ACT): COMPONENTS
IN THIS PRODUCT ARE LISTED ON THE TSCA INVENTORY. CERCLA (COMPREHENSIVE
RESPONSE COMPENSATION, AND LIABILITY ACT): WE RECOMMEND YOU CONTACT LOCAL
AUTHORI TIES TO DETERMINE IF THERE MAY BE OTHER LOCAL REPORTING REQUIREMENTS.
State Regulatory Information: CALIFORNIA PROPOSITION 65: NONE KNOWN UNLESS
SPECIFIED BELOW.
=======================================================
Other Information
=======================================================
Other Information: W CLASSIFICATION: CLASS B, DIVISION 3.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INTERSHIELD PRORECO 508, MEDIUM BLUE, PRA551
Company: INTERNATIONAL PAINT INC
Street: 6001 ANTOINE DR
City: HOUSTON TX
Zipcode: 77091
Health Emergency Phone: 800-854-6813
Label Required IND: Y
Date Of Label Review: 08/04/1999
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE LIQUID - CLASS II. ACUTE: INHALATION: VAPOR
HARMFUL. MAY AFFECT THE BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE
OR NAUSEA. CAUSES NOSE AND THROAT IRRITATION. EYE CONT: CAUSES EYE I
RRITATION. SKIN CONT: CAUSES SKIN IRRITATION. CAN BE ABSORBED THROUGH THE
SKIN. MAY CAUSE ORGAN DAMAGE. INGESTION: MAY BE FATAL IF SWALLOWED AND MAY
CAUSE ORGAN DAMAGE. CHRONIC: NONE LISTED BY MANUFAC TURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
0722B800 LUBRICATING OIL,GENERAL PURPOSE PRESERVATIVE
| 8012-95-1 |
|
ECA 2PA
| |
|
MIL-L-6085C AM.1
| |
|
3217 METHYL ALCOHOL
| |
|
FC-104 FLOURINERT BRAND FLASHLUBE COOLANT
| |
|
POITASSIUM CHLORIDE, 7590
| |
|
HYDROSTAR H-5, H-10, H-35 SHIELDING GASES
| 1333-74-0
7440-37-1 |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 05220
| |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 06519
| |
|
SAFETY LAMP PROPRIETARY FUEL, DINE-AGLOW SAFETY LAMP
| 64742-46-7 |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 06525
| |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 06520
| |
|
MOLY OPEN GEAR OIL AEROSOL, CSA-0819A
| 110-54-3
74-98-6
75-28-5 |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 06531
| |
|
REZTORE TOPICAL ANTISTAT
| 111-76-2
68412-54-4
25322-68-3
7732-18-5 |
|
NATURAL RUBBER (ALL GRADES, TSR, SMR, SIR (SUPDAT)
| 127-07-1 |
|
MARINE COUSTIFAB, 50G-NL-SL
| |
|
603 RETAINING COMPOUND HIGH STRENGTH, 21440
| |
|
SIMONIZ CAR WAX, 28695
| 8052-41-3
64742-88-7
8015-86-9
8002-74-2
8008-20-6 |
|
PEEL AWAY 5
| |
|
INTERSHIELD PRORECO 508, MEDIUM BLUE, PRA551
| 110-43-0
13463-67-7
7631-86-9
21645-51-2 |
|
INTERSHIELD PRORECO 508, DESERT BEIGE, PRA558
| 110-43-0
13463-67-7
7631-86-9
21645-51-2 |
|
UNDERWATER REPAIR PUTTY-UW RESIN, 11800
| 1333-86-4
25068-38-6 |
|
UNDERWATER REPAIR PUTTY (UW) HARDENER, 11800
| |
|
FAST CONVERTER FOR D8020 L/F, D7010
| |
|
SUPERFLEX RED HIGH TEMP RTV SILICONE ADHESIVE SEALANT, 30564
| 63148-62-9
7631-86-9
4253-34-3
1309-37-1
64-19-7 |
|
ULTRA BLUE RTV SILICONE GASKET MAKER, 30567
| |
|
CAPTURE SPOT AND SOIL REMOVER
| |
|
HALOBROM MSDT
| |
|
CER-CRO, 810-830
| 1308-38-9
7732-18-5
63231-67-4
1314-20-1
68188-85-2
68188-83-0 |
|
PELCO COLLOIDAL SILVER, 16031
| |
|
RED EPOXY, 12001
| |
|
MILLENIUM 2100 COVE BASE
| |
|
5760, CYAN DEVELOPER
| |
|
SANTOVAC 5 POLYPHENYL ETHER LUBRICANT
| |
|
SUNCOAST SWIMMING POOL GRANULAR CHLORINATOR (CAL-HYPO)
| 7778-54-3 |
|
CHLORINATING TABLETS, 0407A
| 7778-54-3 |
|
DA 6171 REPELL
| 64742-47-8
64742-52-5
79-01-6
124-38-9 |
|
CARBON-OFF CLEANER
| |
|
HRH-327 HONEYCOMB CORE
| 65997-17-3 |
|
MT TONER, P/N 8910-611
| |
|
VCI-386 CLEAR
| |
|
SAFETY ORANGE, PFS500S8055
| |
|
L/M 11540 HI VISC 90 GL, 484497-88412
| |
|
101-55W175,SANTOPRENE THERMOPLASTIC RUBBER GENERAL PURPOSE G
| |
|
101-64, SANTOPRENE THERMOPLASTIC RUBBER GENERAL (SUPDAT)
| |
|
INTERSHIELD PRORECO 609, PRA 610, CLEAR COAT BASE
| 110-43-0
108-10-1
108-65-6
123-86-4 |
|
FLIPS SEAFOAM BREEZE, DN 4870
| 9002-88-4
915-67-3 |
|
INTERSHIELD PRORECO 609, PRA 611, CLEAR COAT CONVERTER
| 3779-63-3
123-86-4 |
|
FLIPS APPLE BLOSSOM, DN 4860
| 9002-88-4
915-67-3 |
|
|