SANTOVAC FLUIDS INC -- SANTOVAC 5 POLYPHENYL ETHER LUBRICANT
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 01-337-8179
MSDS Num: CJPQL
MSDS NAME: SANTOVAC 5 POLYPHENYL ETHER LUBRICANT
Responsible Party
Name: SANTOVAC FLUIDS INC
Address: 8 GOVERNOR DR
City: SAINT CHARLES MO 63301-7311
Info Phone: 314-723-0240
Emergency Phone Number: (800)424-9300
Chemtrec IND/Phone: (800)424-9300
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: KURT J LESKER CO
Address: 1515 WORTHINGTON AVE
City: CLAIRTON PA 15025
Phone: 412-233-4200
Name: SANTOVAC FLUIDS INC
Address: 8 GOVERNOR DR
City: SAINT CHARLES MO 63301-7311
Phone: 314-723-0240
Contract Number: SP0450-99-M-B196
=======================================================
Item Description Information
=======================================================
Item Manager: S9G
Item Name: LUBRICANT,VACUUM
Unit of Issue: BT
Quantitative Expression: 00000000500ML
UI Container Qty: 0
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Skin: YES
Effects of Exposure: OCCUPATIONAL EXPOSURE TO THIS MATERIAL HAS NOT BEEN
REPORTED TO CAUSE SIGNIFIGANT ADVERSE HEALTH EFFECTS. ON THE BASIS OF
AVAILABLE INFORMATION, EXPOSURE TO SANTOVAC 5 POLYPHENYL ETHER LUBRICANT IS
NO T EXPECTED TO PRODUCE SIGNIFIGANT ADVERSE HEALTH EFFECTS WHEN RECOMMENDED
SAFTEY PRECAUTIONS ARE FOLLOWED.
Explanation Of Carcinogenicity: NONE SPECIFIED BY MANUFACTURER.
Signs And Symptions Of Overexposure: NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES OR SKIN: IMMEDIATE FIRST AID IS NOT LIKELY TO BE REQUIRED.
HOWEVER, MATERIAL CAN BE REMOVED WITH WATER. WASH HEAVILY CONTAMINATED
CLOTHING BEFORE REUSE. INHALED-IMMEDIATE FIRST AID IS NOT LIKELY TO BE
REQUIRED. HOWEVER, IF SYMPTOMS OCCUR, REMOVE TO FRESH AIR. REMOVE MATERIAL
FROM SKIN, EYES & CLOTHING. SWALLOWED-IMMEDIATE FIRST AID IS NOT LIKELY
TO BE REQUIRED. A PHYSICIAN OR POISON CONTROL C ENTER CAN BE CONTACTED FOR
ADVICE.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN LARGE SPILLS WITH DIKES & TRANSFER THE
MATERIAL TO APPROPRIATE CONTAINERS FOR RECLAMATION OR DISPOSAL. ABSORB
REMAINING MATERIAL OR SMALL SPILLS WITH AN INERT MATERIAL & THEN PLACE IN
A CHEMIC AL WASTE CONTAINER. FLUSH RESIDUAL SPILLAREA WITH WATER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: PRODUCT MAY BE CLASSIFIED AS "HAZARDOUS WASTE" D018 DUE
TO THE PRESENCE OF BENZENE OVER 0.5 MG/L. WASTE SHOULD BE ANALYZED IAW METHOD
1311 TOXICITY CHARACTERISTIC LEACHING PROCEDURE (TCLP) AND/OR COMP ARED TO
THE CRITERIA OF 40 CFR 261.24 TOINSURE PROPER DISPOSAL. WASTE PRODUCT MAY BE
CLASSIFIED AS WASTE OIL UNDER STATE & FEDERAL REGULATIONS.
Handling And Storage Precautions: HANDLE IAW GOOD INDUSTRIAL HYGIENE &
SAFETY PRACTICES. THESE PRACTICES INCLUDE AVOIDING UNECESSARY EXPOSURE &
REMOVAL OF MATERIAL FROM EYES, SKIN & CLOTHING.
Other Precautions: EMPTIED CONTAINER RETAINS VAPOR & PRODUCT RESIDUE.
OBSERVE ALL LABELED SAFEGUARDS UNTIL CONTAINER IS CLEANED, RECONDITIONED OR
DESTROYED. PRODUCT IS STABLE UNDER NORMAL CONDITIONS OF STORAGE & HANDLIN
G.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point: =287.8C, 550.F
Autoignition Temp: =612.C, 1133.6F
Extinguishing Media: IN CASE OF FIRE, USE WATER SPRAY (FOG), FOAM, DRY
CHRMICAL, OR CARBON DIOXIDE (CO2).
Fire Fighting Procedures: FIRE FIGHTERS AND OTHERS EXPOSED TO PRODUCTS OF
COMBUSTION SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS. EQUIPMENT SHOULD
BE THOROUGHLY DECONTAMINATED AFTER USE.
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID BREATHING MIST. USE NIOSH/MSHA APPROVED
RESPIRATORY PROTECTION EQUIPMENT WHEN AIRBORNE EXPOSURE IS EXCESSIVE. CONSULT
RESPIRATOR MANUFACTUREER TO DETERMINE APPROPRIATE TYPE EQUIPMENT FOR GIVEN A
PPLICATION. OBSERVE RESPIRATOR USE LIMITATIONS SPECIFIED BY NIOSH/MSHA OR THE
MFR. RESPIRATORY PROTECTION PROGRAMS MUST COMPLY WITH 29 CFR 1910.134.
Ventilation: PROVIDE NATURAL OR MECHANICAL VENTILATION TO MINIMIZE EXPOSURE.
(SEE SUPPLEMENTAL)
Protective Gloves: RECOMMENDED.
Eye Protection: USE GOOD INDUSTRIAL PRACTICE TO AVOID EYE CONTACT.
Other Protective Equipment: NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices: WASH HANDS AND CONTAMINATED SKIN THOROUGHLY AFTER
HANDLING.
Supplemental Safety and Health: IF PRACTICAL, USE LOCAL MECHANICAL EXHAUST
VENTILATION AT SOURCES OF AIR CONTAMINATION SUCH AS OPEN PROCESS EQUIPMENT.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
Boiling Point: =476.1C, 889.F
Vapor Density: 15.5
Spec Gravity: 1.195
PH: NEUTRAL
Solubility in Water: SOLUBLE IN ACETONE
Appearance and Odor: LIGHT YELLOW ESSENTIALLY CLEAR LIQUID, ODORLESS TO SLIGHT
PHENOLIC
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: PRODUCT IS STABLE UNDER NORMAL STORAGE AND
HANDLING CONDITIONS.
Materials To Avoid: EXPOSURE TO MATERIALS WHICH ARE HIGHLY OXIDIZING SHOUD BE
AVOIDED.
Hazardous Decomposition Products: CONTINUED USE AT TEMPERATURES ABOVE 425C MAY
RESULT IN THE FORMATION OF BENZENE AND PHENOL. IF THE PRODICT IS BURNED,
COMPLETE COMBUSTION PRODUCES CARBON DIOXIDE AND WATER AND PARTIAL COMBUSTION
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
Toxicological Information: ORAL (RAT) LD50 > 34,600 MG/KG (PRACTICALLY
NON-TOXIC). ORAL (RABBIT) LD50 > 34,500 MG/KG (PRACTICALLY NON-TOXIC).
DERMAL (RABBIT) LD50 > 34,500 MG/KG (PRACTICALLY NON-TOXIC). INHALATION
(RAT) LC50/4- HR >47 MG/. EYE IRRITATION (RABBIT, 0.0/110.0)
NON-IRRITATING. SKIN IRRITAION (RABBIT, 24-HR, 0.0/8.0) NON-IRRITATING.
=======================================================
Ecological Information
=======================================================
Ecological: SANTOVAC FLUIDS, INC. HAS NOT CONDUCTED ENVIRONMENTAL STUDIES WITH
THIS PRODUCT.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: THIS PRODUCT IS NOT HAZARDOUS UNDER THE APPLICABLE
DOT/ICAO/IATA OR IMDG REGULATIONS.
=======================================================
Regulatory Information
=======================================================
Federal Regulatory Information: TSCA INVENTORY: ALL COMPONENTS ARE LISTED.
State Regulatory Information: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Other Information
=======================================================
Other Information: NONE SPECIFIED BY MANUFACURER.
=======================================================
Transportation Information
=======================================================
Trans ID NO: 149134
MSDS NAME: SANTOVAC 5 POLYPHENYL ETHER LUBRICANT
MSDS Prepared Date: 03/17/1997
Review Date: 10/13/1999
Net Unit Weight: 1.66 LB
Multiple KIT Number: 0
Unit Of Issue: BT
Container QTY: 0
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SANTOVAC 5 POLYPHENYL ETHER LUBRICANT
Company: SANTOVAC FLUIDS INC
Street: 8 GOVERNOR DR
City: SAINT CHARLES MO
Zipcode: 63301-7311
Health Emergency Phone: (800)424-9300
Label Required IND: Y
Date Of Label Review: 10/13/1999
Status Code: A
Year Procured: 1999
Origination Code: F
Eye Protection IND: NO
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: None
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: TARGET ORGANS: NONE SPECIFIED BY MANUFACURER. ACUTE
HEALTH: OCCUPATIONAL EXPOSURE TO THIS MATERIAL HAS NOT BEEN REPORTED TO CAUSE
SIGNIFIGANT ADVERSE HEALTH EFFECTS. ON THE BASIS OF AVAILABLE INFORMAT ION,
EXPOSURE TO SANTOVAC 5 POLYPHENYL ETHER LUBRICANT IS NOT EXPECTED TO PRODUCE
SIGNIFIGANT ADVERSE HEALTH EFFECTS WHEN RECOMMENDED SAFTEY PRECAUTIONS ARE
FOLLOWED.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.