CORTEC CORPORATION -- VCI-386 CLEAR
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJPSQ
MSDS NAME: VCI-386 CLEAR
Responsible Party
Name: CORTEC CORPORATION
Address: 4119 WHITE BEAR PARKWAY
City: ST. PAUL MN 55110
Info Phone: 612-429-1100; 800-426-7832
Emergency Phone Number: (800)424-9300
Preparer's Name: MICHAEL PRENOSIL
Chemtrec IND/Phone: (800)424-9300
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: THE CORTEC CORPORATION
Address: 4119 WHITE BEAR PKY
City: SAINT PAUL MN 55110-7634
Phone: 651-429-1100/800-4-CORTEC
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Signs And Symptions Of Overexposure: SEE HEATLH HAZARDS.
Medical Cond Aggravated By Exposure: NONE KNOWN.
First Aid: EYE CONTACT: FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES. CONSULT
A PHYSICIAN. SKIN CONTACT: WASH AFFECTED AREA WITH SOAP AND WATER. IF
IRRITATION PERSISTS, CONSULT PHYSICIAN. INHALATION: REMOVE TO AN
UNCONTAMINATED AREA, ADMINISTER OXYGEN IF NECESSARY. IF VICTIM HAS STOPPED
BREATHING BEGIN CPR. GET MEDICAL ATTENTION. INGESTION: IF CONSCIOUS, GIVE
WATER OR MILK AND INDUCE VOMITING. SEEK IMMEDIAT E MEDICAL CARE.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ABSORB ON SWEEPING COMPOUND OR OTHER ABSORBENT
MATERIAL. KEEP OUT OF STREAMS OR WATERWAYS.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH EXISTING FEDERAL, STATE
AND LOCAL ENVIRONMENTAL REGULATIONS.
Handling And Storage Precautions: AVOID EYE AND SKIN CONTACT. AVOID EXCESSIVE
INHALATION OF VAPORS AND/OR PARTICLE MISTS. USE IN WELL-VENTILATED
ENVIRONMENT. STORE AT 40F OR ABOVE. KEEP AWAY FROM HEAT OR OPEN FLAME.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: >120.C, 248.F
Lower Limits: NE
Upper Limits: NE
Extinguishing Media: WATER, CARBON DIOXIDE OR OTHER DRY CHEMICAL FIRE FIGHTING
AGENTS.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N).
Unusual Fire/Explosion Hazard: NONE. FLAMMABILITY RATING: 1.
=======================================================
Control Measures
=======================================================
Respiratory Protection: A RESPIRATOR WOULD NOT BE REQUIRED FOR OPEN AREAS (NOT
CONFINED) WITH ADEQUATE VENTILATION WHEN SPRAYING. IF NECESSARY A NIOSH
APPROVED DUST/MIST RESPIRATOR TO REMOVE PARTICLE MASS.
Ventilation: ADEQ VENT WOULD INCLUDE "THE OUTDOORS" OR ANY "INDOOR ENVIRONMENT"
W/CONTROLLED TEMP SYS THAT USED FORCE AIR W/HIGH BAYS OR OTHER SIMILAR
CONDITIONS.
Protective Gloves: CHEMICAL RESISTANT RUBBER OR PLASTIC GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH AND DELUGE SHOWER (FP N).
Supplemental Safety and Health: PHYSICAL DATA: NON-VOLATILE (WEIGHT): 35-40%.
DENSITY: 8.4-8.6 LB/GAL (1.01-1.03 KG/L).
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: N/E
M.P/F.P Text: N/E
Vapor Pres: N/E
Vapor Density: N/E
Spec Gravity: 1.01-1.03
PH: 9-9.6 (NEAT)
Evaporation Rate & Reference: N/E
Appearance and Odor: MILKY, OFF-WHITE LIQUID; CHARACTERISTIC ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: CONTACT WITH INCOMPATIBLE MATERIALS.
Materials To Avoid: STRONG ACIDS, ALKALIS AND OXIDIZING AGENTS.
Hazardous Decomposition Products: OXIDES OF CARBON AND NITROGEN.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT/IMDGA/IATA SHIPPING NAME: N/A. UN/NA NUMBER: N/A.
DOT/IMDG/IATA HAZARD CLASS: N/A. TSCA STATUS: LISTED. DOT/IMDGA/IATA
REQUIDED. DOT IMDGA/IATA REQUIRED LABELS: N/A. TECHNICAL SHIPPING NAME: N/A.
FREIGHT CLASS BULK: SAME AS ABOVE. LTL: 65. TL: 35; SUPERCEDES
=======================================================
Other Information
=======================================================
Other Information: PRODUCT DESCRIPTION: PROPRIETARY WATERBORNE CORROSION
RESISTANT COATING. NE = NOT ESTABLISHED; NA = NOT APPLICABLE.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: VCI-386 CLEAR
Company: THE CORTEC CORPORATION
Street: 4119 WHITE BEAR PKY
City: SAINT PAUL MN
Zipcode: 55110-7634
Health Emergency Phone: (800)424-9300
Label Required IND: Y
Date Of Label Review: 08/19/1999
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: REPEATED OR PROLONGED SKIN CONTACT WITH MATERIAL
CAN CAUSE SKIN IRRITATION. EYE CONTACT WITH MATERIAL CAN CAUSE IRRITATION.
EXCESSIVE INHALATION OF HIGH VAPOR CONCENTRATIONS MAY IRRITATE THE UP PER
RESPIRATORY TRACT. IF THE PRODUCT IS SPRAYED OR ATOMIZED, INHALATION OF
PARTICLE MIST MAY IRRITATE UPPER RESPIRATORY TRACT. INGESTION: EXPECTED TO BE
HARMFUL. CHRONIC: NONE SPECIFIED BY MANUFACTUR ER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.