INTERNATIONAL PAINT INC -- INTERSHIELD PRORECO 609, PRA 611, CLEAR COAT
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJPTT
MSDS NAME: INTERSHIELD PRORECO 609, PRA 611, CLEAR COAT CONVERTER
Kit Part: Y
Responsible Party
Name: INTERNATIONAL PAINT INC
Address: 6001 ANTOINE DR
City: HOUSTON TX 77091
Info Phone: 800-854-6813
Emergency Phone Number: 800-424-9300
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: INTERNATIONAL PAINT INC
Address: 6001 ANTOINE DR
City: HOUSTON TX 77091
Phone: 800-589-1267/800-854-6813
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Cas: 3779-63-3
Name: ALIPHATIC POLYISOCYANATES
% low Wt: 50.
% high Wt: 100.
------------------------------
Cas: 123-86-4
RTECS #: AF7350000
Name: BUTYL ACETATE
% low Wt: 1.
% high Wt: 10.
OSHA PEL: 710 MG/M3;150 PPM
ACGIH TLV: 713 MG/M3;150 PPM
ACGIH STEL: 950 MG/M3;200 PPM
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: INHAL: VAPOR HARMFUL. MAY AFFECT BRAIN/NERVOUS
SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES NOSE & THROAT
IRRITATION. MAY CAUSE MUCOUS MEMBRANE AND RESPIRATORY TRACT IRRITATION,
TIGHTNE SS OF CHEST, HEADACHE, SHORTNESS OF BREATH AND DRY COUGH. MAY CAUSE
ASTHMA-LIKE SYMPTOMS TO OCCUR. EYE CONT: CAUSES IRRITATION. SEVERE IRRITATION
& POSS DMG TO CORNEA & IMPAIRMENT OF VISION. SKIN CONT : CAUSE SEVERE
IRRITATION. INGEST: CAN RESULT IN IRRITATION OF MOUTH, STOMACH TISSUE AND
DIGESTIVE TRACT.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
First Aid: GENERAL: IN ALL CASES OF DOUBT, OR WHEN SYMPTOMS PERSIST, SEEK
MEDICAL ATTN. NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON. INHAL:
REMOVE TO FRESH AIR. IF DISCOMFORT IS PRESENT/BRTHG IS ABSENT GE T MED ATTN
IMMED. EYE CONT: FLUSH IMMED W/PLENTY OF WATER FOR AT LST 15 MINS UNTIL IRRIT
SUBSIDES. IF IRRIT PERSISTS, GET MED ATTN. SKIN CONT: FLUSH W/LG AMTS OF
WATER. USE SOAP IF AVAIL. REMOVE SEVER LY CONTAMD CLTHG (INCL SHOES) &
WASH BEFORE REUSE. IF IRRIT PERSISTS, GET MED ATTN. INGEST: DO NOT INDUCE
VOMITING. KEEP AT REST. GET PROMPT MED ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN SPILLED LIQUID WITH SAND OR EARTH. DO NOT USE
COMBUSTIBLE MATERIALS SUCH AS SAWDUST. ABSORB SPILL WITH AN INERT MATERIAL
(E.G., DRY SAND OR EARTH), THEN PLACE IN A CHEMICAL WASTE CONTAINER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Handling And Storage Precautions: KEEP CONTAINER CLOSED. LOOSEN CLOSURE
CAUTIOUSLY BEFORE OPENING. STORE IN A COOL, WELL VENTILATED PLACE AWAY FROM
INCOMPATIBLE MATERIALS. (SEE STABILITY & REACTIVITY SECTION 10). KEEP
AWAY FROM HEAT, SPARKS AND FLAMES.
Other Precautions: PROTECT MATERIAL FROM DIRECT SUNLIGHT. GROUND AND BOND
CONTAINERS WHEN TRANSFERRING MATERIALS. EMPTY CONTAINERS MAY RETAIN HAZARDOUS
PROPERTIES. FOLLOW ALL MSDS/LABEL WARNINGS, EVEN AFTER THE CONTAINE R IS
EMPTIED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: =40.6C, 105.F
Flash Point Text: 105F,40.5515C
Lower Limits: 0.6%
Extinguishing Media: COMBUSTIBLE LIQUID - CLASS II. FOAM, CARBON DIOXIDE, DRY
CHEMICAL.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N). ISOLATE FROM HEAT, SPARKS, ELECTRICAL EQUIPMENT AND OPEN FLAME. IN
THE ABSENCE OF ELECTRICITY, A WATER SPRAY (A FOG NOZZLE IS PREFERRED) M AY BE
USED TO COOL CONTAINERS.
Unusual Fire/Explosion Hazard: CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. DECOMPOSITION AND COMBUSTION PRODUCTS MAY BE TOXIC.
=======================================================
Control Measures
=======================================================
Respiratory Protection: INDIVIDUALS W/LUNG/BRTHG PROBLEMS/PRIOR RXN TO
ISOCYANATES MUST NOT BE EXPOSED TO VAP/SPRAY MIST. DO NOT BREATHE VAP/SPRAY
MIST. WEAR APPROP, PROPERLY FITTED RESPIRATOR (NIOSH APPRVD) DURING &
AFTER A PPLIC UNLESS AIR MONITORING DEMONSTRATES VAP/MIST LEVELS ARE BELOW
APPLIC LIMITS. A NIOSH APPRVD SUPPLIED AIR RESPIRATOR (EITHER POSITIVE
PRESSURE OR (SUPDAT)
Ventilation: PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO: A) KEEP TLV OF
HAZ INGREDS BELOW THE LIMITS SPECIFIED IN SECTION TWO. (SUPDAT)
Protective Gloves: WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N). AS
NEEDED, USE BODY PROTECTION TO AVOID CONTACT WITH PRODUCT.
Supplemental Safety and Health: RESP PROT: CONTINOUS FLOW TYPE) IS REQD. FOLLOW
MANUFACTURERS DIRECTIONS FOR RESP USE & OBSERVE REQUIREMENTS SPECIFIED IN
29 CFR 1910.134. VENT: B) REMOVE VOLATILES PRODUCED DURING CURE & DECOMP
PRODS PRODUCED DURING WELDING OR CUTTING ON SURFS COATED W/THIS PRODUCT.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =145.6C, 294.F
B.P. Text: 294F,145.541C
Vapor Density: HVR/AIR
Spec Gravity: 1.13
Evaporation Rate & Reference: SLOWER/ETHER
Appearance and Odor: LIQUID.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO
DECOMPOSITION AS IN WELDING. FUMES MAY PRODUCE CARBON DIOXIDE AND CARBON
MONOXIDE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: THERE IS NO DATA AVAIL ON PRODUCT ITSELF. NOTICE:
REPORTS HAVE ASSOCIATED REPEATED & PROLONGED OCCUPATIONAL OVEREXPOSURE TO
SOLVS W/PERM BRAIN & NERV SYS DMG. INTENTIONAL MISUSE BY DELIBERATELY
CONCEN TRATING & INHALING CONTENTS MAY BE HARMFUL OR FATAL. REPEATED
EXPOSURE TO ALIPHATIC POLYISOCYANATE MAY CAUSE ALLERGIC SENSITIZATION OF
RESPIRATORY TRACT. THIS IS CHARACTERIZED BY ASTHMA-LIKE RESPONSE UPON
RE-EXPOSURE TO THE CHEMICAL.
=======================================================
Ecological Information
=======================================================
Ecological: THERE IS NO DATA AVAILABLE ON THE PRODUCT ITSELF.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DOT (DEPARTMENT OF TRANSPORTATION): PROPER SHIPPING
NAME: PAINT. HAZARD CLASS: FLAMMABLE LIQUID, 3. UN NUMBER: UN1263. PACKING
GROUP: PACKING GROUP III.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: NONE KNOWN UNLESS CHEMICALS ARE SPECIFIED BELOW.
SECTION 302 REPORTABLE INGREDIENTS. 313 REPORTABLE INGREDIENTS.
Federal Regulatory Information: TSCA (TOXIC SUBSTANCE CONTROL ACT): COMPONENTS
OF THIS PRODUCT ARE LISTED ON THE TSCA INVENTORY. CERCLA (COMPREHENSIVE
RESPONSE COMPENSATION, AND LIABILITY ACT): WE RECOMMEND YOU CONTACT LOCAL
AUTHORI TIES TO DETERMINE IF THERE MAY BE OTHER LOCAL REPORTING REQUIREMENTS.
State Regulatory Information: CALIFORNIA PROPOSITION 65: NONE KNOWN.
=======================================================
Other Information
=======================================================
Other Information: W CLASSIFICATION: CLASS B, DIVISION 3.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INTERSHIELD PRORECO 609, PRA 611, CLEAR COAT CONVERTER
Company: INTERNATIONAL PAINT INC
Street: 6001 ANTOINE DR
City: HOUSTON TX
Zipcode: 77091
Health Emergency Phone: 800-424-9300
Label Required IND: Y
Date Of Label Review: 08/17/1999
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE LIQUID - CLASS II. ACUTE: INHAL: VAPOR
HARMFUL. MAY AFFECT BRAIN/NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR
NAUSEA. CAUSES NOSE & THROAT IRRITATION. MAY CAUSE MUCOUS MEMBRANE AND
RESPIR ATORY TRACT IRRITATION, TIGHTNESS OF CHEST, HEADACHE, SHORTNESS OF
BREATH AND DRY COUGH. MAY CAUSE ASTHMA-LIKE SYMPTOMS TO OCCUR. EYE CONT:
CAUSES IRRITATION. SEVERE IRRITATION & POSS DMG TO CORNEA &
IMPAIRMENT OF VISION. SKIN CONT: CAUSE SEVERE IRRITATION. INGEST: CAN RESULT
IN IRRITATION OF MOUTH, STOMACH TISSUE AND DIGESTIVE TRACT. CHRONIC: NONE
LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
0722B800 LUBRICATING OIL,GENERAL PURPOSE PRESERVATIVE
| 8012-95-1 |
|
ECA 2PA
| |
|
MIL-L-6085C AM.1
| |
|
3217 METHYL ALCOHOL
| |
|
FC-104 FLOURINERT BRAND FLASHLUBE COOLANT
| |
|
POITASSIUM CHLORIDE, 7590
| |
|
HYDROSTAR H-5, H-10, H-35 SHIELDING GASES
| 1333-74-0
7440-37-1 |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 05220
| |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 06519
| |
|
SAFETY LAMP PROPRIETARY FUEL, DINE-AGLOW SAFETY LAMP
| 64742-46-7 |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 06525
| |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 06520
| |
|
MOLY OPEN GEAR OIL AEROSOL, CSA-0819A
| 110-54-3
74-98-6
75-28-5 |
|
MARINE ADHESIVE SEALANT FAST CURE 5200-WHITE, 06531
| |
|
REZTORE TOPICAL ANTISTAT
| 111-76-2
68412-54-4
25322-68-3
7732-18-5 |
|
NATURAL RUBBER (ALL GRADES, TSR, SMR, SIR (SUPDAT)
| 127-07-1 |
|
MARINE COUSTIFAB, 50G-NL-SL
| |
|
603 RETAINING COMPOUND HIGH STRENGTH, 21440
| |
|
SIMONIZ CAR WAX, 28695
| 8052-41-3
64742-88-7
8015-86-9
8002-74-2
8008-20-6 |
|
PEEL AWAY 5
| |
|
INTERSHIELD PRORECO 508, MEDIUM BLUE, PRA551
| 110-43-0
13463-67-7
7631-86-9
21645-51-2 |
|
INTERSHIELD PRORECO 508, DESERT BEIGE, PRA558
| 110-43-0
13463-67-7
7631-86-9
21645-51-2 |
|
UNDERWATER REPAIR PUTTY-UW RESIN, 11800
| 1333-86-4
25068-38-6 |
|
UNDERWATER REPAIR PUTTY (UW) HARDENER, 11800
| |
|
FAST CONVERTER FOR D8020 L/F, D7010
| |
|
SUPERFLEX RED HIGH TEMP RTV SILICONE ADHESIVE SEALANT, 30564
| 63148-62-9
7631-86-9
4253-34-3
1309-37-1
64-19-7 |
|
ULTRA BLUE RTV SILICONE GASKET MAKER, 30567
| |
|
CAPTURE SPOT AND SOIL REMOVER
| |
|
HALOBROM MSDT
| |
|
CER-CRO, 810-830
| 1308-38-9
7732-18-5
63231-67-4
1314-20-1
68188-85-2
68188-83-0 |
|
PELCO COLLOIDAL SILVER, 16031
| |
|
RED EPOXY, 12001
| |
|
MILLENIUM 2100 COVE BASE
| |
|
5760, CYAN DEVELOPER
| |
|
SANTOVAC 5 POLYPHENYL ETHER LUBRICANT
| |
|
SUNCOAST SWIMMING POOL GRANULAR CHLORINATOR (CAL-HYPO)
| 7778-54-3 |
|
CHLORINATING TABLETS, 0407A
| 7778-54-3 |
|
DA 6171 REPELL
| 64742-47-8
64742-52-5
79-01-6
124-38-9 |
|
CARBON-OFF CLEANER
| |
|
HRH-327 HONEYCOMB CORE
| 65997-17-3 |
|
MT TONER, P/N 8910-611
| |
|
VCI-386 CLEAR
| |
|
SAFETY ORANGE, PFS500S8055
| |
|
L/M 11540 HI VISC 90 GL, 484497-88412
| |
|
101-55W175,SANTOPRENE THERMOPLASTIC RUBBER GENERAL PURPOSE G
| |
|
101-64, SANTOPRENE THERMOPLASTIC RUBBER GENERAL (SUPDAT)
| |
|
INTERSHIELD PRORECO 609, PRA 610, CLEAR COAT BASE
| 110-43-0
108-10-1
108-65-6
123-86-4 |
|
FLIPS SEAFOAM BREEZE, DN 4870
| 9002-88-4
915-67-3 |
|
INTERSHIELD PRORECO 609, PRA 611, CLEAR COAT CONVERTER
| 3779-63-3
123-86-4 |
|
FLIPS APPLE BLOSSOM, DN 4860
| 9002-88-4
915-67-3 |
|
|